Boron group

From Wikipedia, the free encyclopedia
  (Redirected from Group 13 elements)
Jump to: navigation, search
Boron group (group 13)
Hydrogen (diatomic nonmetal)
Helium (noble gas)
Lithium (alkali metal)
Beryllium (alkaline earth metal)
Boron (metalloid)
Carbon (polyatomic nonmetal)
Nitrogen (diatomic nonmetal)
Oxygen (diatomic nonmetal)
Fluorine (diatomic nonmetal)
Neon (noble gas)
Sodium (alkali metal)
Magnesium (alkaline earth metal)
Aluminium (post-transition metal)
Silicon (metalloid)
Phosphorus (polyatomic nonmetal)
Sulfur (polyatomic nonmetal)
Chlorine (diatomic nonmetal)
Argon (noble gas)
Potassium (alkali metal)
Calcium (alkaline earth metal)
Scandium (transition metal)
Titanium (transition metal)
Vanadium (transition metal)
Chromium (transition metal)
Manganese (transition metal)
Iron (transition metal)
Cobalt (transition metal)
Nickel (transition metal)
Copper (transition metal)
Zinc (transition metal)
Gallium (post-transition metal)
Germanium (metalloid)
Arsenic (metalloid)
Selenium (polyatomic nonmetal)
Bromine (diatomic nonmetal)
Krypton (noble gas)
Rubidium (alkali metal)
Strontium (alkaline earth metal)
Yttrium (transition metal)
Zirconium (transition metal)
Niobium (transition metal)
Molybdenum (transition metal)
Technetium (transition metal)
Ruthenium (transition metal)
Rhodium (transition metal)
Palladium (transition metal)
Silver (transition metal)
Cadmium (transition metal)
Indium (post-transition metal)
Tin (post-transition metal)
Antimony (metalloid)
Tellurium (metalloid)
Iodine (diatomic nonmetal)
Xenon (noble gas)
Caesium (alkali metal)
Barium (alkaline earth metal)
Lanthanum (lanthanide)
Cerium (lanthanide)
Praseodymium (lanthanide)
Neodymium (lanthanide)
Promethium (lanthanide)
Samarium (lanthanide)
Europium (lanthanide)
Gadolinium (lanthanide)
Terbium (lanthanide)
Dysprosium (lanthanide)
Holmium (lanthanide)
Erbium (lanthanide)
Thulium (lanthanide)
Ytterbium (lanthanide)
Lutetium (lanthanide)
Hafnium (transition metal)
Tantalum (transition metal)
Tungsten (transition metal)
Rhenium (transition metal)
Osmium (transition metal)
Iridium (transition metal)
Platinum (transition metal)
Gold (transition metal)
Mercury (transition metal)
Thallium (post-transition metal)
Lead (post-transition metal)
Bismuth (post-transition metal)
Polonium (post-transition metal)
Astatine (metalloid)
Radon (noble gas)
Francium (alkali metal)
Radium (alkaline earth metal)
Actinium (actinide)
Thorium (actinide)
Protactinium (actinide)
Uranium (actinide)
Neptunium (actinide)
Plutonium (actinide)
Americium (actinide)
Curium (actinide)
Berkelium (actinide)
Californium (actinide)
Einsteinium (actinide)
Fermium (actinide)
Mendelevium (actinide)
Nobelium (actinide)
Lawrencium (actinide)
Rutherfordium (transition metal)
Dubnium (transition metal)
Seaborgium (transition metal)
Bohrium (transition metal)
Hassium (transition metal)
Meitnerium (unknown chemical properties)
Darmstadtium (unknown chemical properties)
Roentgenium (unknown chemical properties)
Copernicium (transition metal)
Nihonium (unknown chemical properties)
Flerovium (unknown chemical properties)
Moscovium (unknown chemical properties)
Livermorium (unknown chemical properties)
Tennessine (unknown chemical properties)
Oganesson (unknown chemical properties)
group 12  carbon group
IUPAC group number 13
Name by element boron group
Trivial name triels, icosagens
CAS group number
(US, pattern A-B-A)
old IUPAC number
(Europe, pattern A-B)

↓ Period
Image: Boron chunks
Boron (B)
5 Metalloid
Image: Aluminium metal
Aluminium (Al)
13 Post-transition metal
Image: Gallium crystas
Gallium (Ga)
31 Post-transition metal
Image: Ductile indium wire
Indium (In)
49 Post-transition metal
Image: Thallium pieces stored in a glass ampoule under argon atmosphere
Thallium (Tl)
81 Post-transition metal
7 Nihonium (Nh)
113 unknown chemical properties

primordial element
synthetic element
Atomic number color:

The boron group are the chemical elements in group 13 of the periodic table, comprising boron (B), aluminium (Al), gallium (Ga), indium (In), thallium (Tl), and perhaps also the chemically uncharacterized nihonium (Nh). The elements in the boron group are characterized by having three electrons in their outer energy levels (valence layers).[1] These elements have also been referred to as icosagens[2] and triels.

Boron is classified as a metalloid while the rest, with the possible exception of nihonium, are considered post-transition metals. Boron occurs sparsely, probably because bombardment by the subatomic particles produced from natural radioactivity disrupts its nuclei. Aluminium occurs widely on earth, and indeed is the third most abundant element in the Earth's crust (8.3%).[3] Gallium is found in the earth with an abundance of 13 ppm. Indium is the 61st most abundant element in the earth's crust, and thallium is found in moderate amounts throughout the planet. Nihonium is never found in nature and therefore is termed a synthetic element.

Several group 13 elements have biological roles in the ecosystem. Boron is a trace element in humans and is essential for some plants. Lack of boron can lead to stunted plant growth, while an excess can also cause harm by inhibiting growth. Aluminium has neither a biological role nor significant toxicity and is considered safe. Indium and gallium can stimulate metabolism[citation needed]; gallium is credited with the ability to bind itself to iron proteins. Thallium is highly toxic, interfering with the function of numerous vital enzymes, and has seen use as a pesticide.[4]


Like other groups, the members of this family show patterns in electron configuration, especially in the outermost shells, resulting in trends in chemical behavior:

Z Element No. of electrons per shell
5 boron 2, 3
13 aluminium 2, 8, 3
31 gallium 2, 8, 18, 3
49 indium 2, 8, 18, 18, 3
81 thallium 2, 8, 18, 32, 18, 3
113 nihonium 2, 8, 18, 32, 32, 18, 3 (predicted)

The boron group is notable for trends in the electron configuration, as shown above, and in some of its elements' characteristics. Boron differs from the other group members in its hardness, refractivity and reluctance to participate in metallic bonding. An example of a trend in reactivity is boron's tendency to form reactive compounds with hydrogen.[5]

Chemical reactivity[edit]


Most of the elements in the boron group show increasing reactivity as the elements get heavier in atomic mass and higher in atomic number. Boron, the first element in the group, is generally unreactive with many elements except at high temperatures, although it is capable of forming many compounds with hydrogen, sometimes called boranes.[6] The simplest borane is diborane, or B2H6.[5] Another example is B10H14.

The next group-13 elements, aluminium and gallium, form fewer stable hydrides, although both AlH3 and GaH3 exist. Indium, the next element in the group, is not known to form many hydrides, except in complex compounds such as the phosphine complex H3InP(Cy)3.[7] No stable compound of thallium and hydrogen has been synthesized in any laboratory.


All of the boron-group elements are known to form a trivalent oxide, with two atoms of the element bonded covalently with three atoms of oxygen. These elements show a trend of increasing pH (from acidic to basic).[13] Boron oxide (B2O3) is slightly acidic, aluminium and gallium oxide (Al2O3 and Ga2O3 respectively) are amphoteric, indium(III) oxide (In2O3) is nearly amphoteric, and thallium(III) oxide (Tl2O3) is a Lewis base because it dissolves in acids to form salts. Each of these compounds are stable, but thallium oxide decomposes at temperatures higher than 875 °C.

A powdered sample of boron trioxide (B2O3), one of the oxides of boron


The elements in group 13 are also capable of forming stable compounds with the halogens, usually with the formula MX3 (where M is a boron-group element and X is a halogen.) The only exception to this is thallium(III) iodide.[14] Fluorine, the first halogen, is able to form stable compounds with every element that has been tested (except neon and helium),[15] and the boron group is no exception. It is even hypothesized that nihonium could form a compound with fluorine, NhF3, before spontaneously decaying due to nihonium's radioactivity. Chlorine also forms stable compounds with all of the elements in the boron group, including thallium, and is hypothesized to react with nihonium. All of the elements will react with bromine under the right conditions, as with the other halogens but less vigorously than either chlorine or fluorine. Iodine will react with all natural elements in the periodic table except for the noble gases, and is notable for its explosive reaction with aluminium to form 2AlI3.[16] Astatine, the heaviest halogen, has only formed a few compounds, due to its radioactivity and short half-life, and no reports of a compound with an At–B, –Al, –Ga, –In, –Tl, or –Nh bond have been seen, although scientists think that it should form salts with metals.[17]

Physical properties[edit]

It has been noticed that the elements in the boron group have similar physical properties, although most of boron's are exceptional. For example, all of the elements in the boron group, except for boron itself, are soft. Moreover, all of the other elements in group 13 are relatively reactive at moderate temperatures, while boron's reactivity only becomes comparable at very high temperatures. One characteristic that all do have in common is having three electrons in their valence shells. Boron, being a metalloid, is a thermal and electrical insulator at room temperature, but a good conductor of heat and electricity at high temperatures.[8] Unlike boron, the metals in the group are good conductors under normal conditions. This is in accordance with the long-standing generalization that all metals conduct heat and electricity better than most non-metals.[18]

Oxidation states[edit]

The inert s-pair effect is significant in the group-13 elements, especially the heavier ones like thallium. This results in a variety of oxidation states. In the lighter elements, the +3 state is the most stable, but the +1 state becomes more prevalent with increasing atomic number, and is the most stable for thallium.[19] Boron is capable of forming compounds with lower oxidization states, of +1 or +2, and aluminium can do the same.[20] Gallium can form compounds with the oxidation states +1, +2 and +3. Indium is like gallium, but its +1 compounds are more stable than those of the lighter elements. The strength of the inert-pair effect is maximal in thallium, which is generally only stable in the oxidation state of +1, although the +3 state is seen in some compounds. Stable and monomeric gallium, indium and thallium radicals with a formal oxidation state of +2 have since been reported.[21]

Periodic trends[edit]

There are several trends that one could notice as they look at the properties of Boron group members. The Boiling Points of these elements drop from period to period, while densities tend to rise.

The 5 stable elements of the boron group
Element Boiling Point (C) Density (g/cm3)
Boron 4,000° 2.46
Aluminium 2,519° 2.7
Gallium 2,204° 5.904
Indium 2,072° 7.31
Thallium 1,473° 11.85


With the exception of the synthetic nihonium, all of the elements of the boron group have stable isotopes. Because all their atomic numbers are odd, boron, gallium and thallium have only two stable isotopes, while aluminium and indium are monoisotopic, having only one. 10B and 11B are both stable, as are 27Al, 69Ga and 71Ga, 113In, and 203Tl and 205Tl.[22] All of these isotopes are readily found in macroscopic quantities in nature. In theory, though, all isotopes with an atomic number greater than 40 are supposed to be unstable to such decay modes as spontaneous fission and alpha decay. Conversely, all isotopes whose atomic numbers are less than 40 are theoretically supposed to be energetically stable to all forms of decay (with the exception of proton decay, which has never been observed).

Like all other elements, the elements of the boron group have radioactive isotopes, either found in trace quantities in nature or produced synthetically. The longest-lived of these unstable isotopes is the indium isotope 115In, with its extremely long half-life of 4.41 × 1014 y. This isotope is relatively important among indium's radioisotopes. The shortest-lived is 7B, with a half-life of a mere 350±50 × 10−24 s, being the boron isotope with the fewest neutrons and a half-life long enough to measure. Some radioisotopes have important roles in scientific research; a few are used in the production of goods for commercial use or, more rarely, as a component of finished products.[23]


The boron group has had many names over the years. According to former conventions it was Group IIIB in the European naming system and Group IIIA in the American. The group has also gained two collective names, "earth metals" and "triels". The latter name is derived from the Latin prefix tri- ("three") and refers to the three valence electrons that all of these elements, without exception, have in their valence shells.[1]

Boron was known to the ancient Egyptians, but only in the mineral borax. The metalloid element was not known in its pure form until 1808, when Humphry Davy was able to extract it by the method of electrolysis. Davy devised an experiment in which he dissolved a boron-containing compound in water and sent an electric current through it, causing the elements of the compound to separate into their pure states. To produce larger quantities he shifted from electrolysis to reduction with sodium. Davy named the element boracium. At the same time two French chemists, Joseph Louis Gay-Lussac and Louis Jacques Thénard, used iron to reduce boric acid. The boron they produced was oxidized to boron oxide.[24][25]

Aluminium, like boron, was first known in minerals before it was finally extracted from alum, a common mineral in some areas of the world. Antoine Lavoisier and Humphry Davy had each separately tried to extract it. Although neither succeeded, Davy had given the metal its current name. It was only in 1825 that the Danish scientist Hans Christian Ørsted successfully prepared a rather impure form of the element. Many improvements followed, a significant advance being made just two years later by Friedrich Wöhler, whose slightly modified procedure still yielded an impure product. The first pure sample of aluminium is credited to Henri Etienne Sainte-Claire Deville, who substituted sodium for potassium in the procedure. At that time aluminium was considered precious, and it was displayed next to such metals as gold and silver.[25][26] The method used today, electrolysis of aluminium oxide dissolved in cryolite, was developed by Charles Martin Hall and Paul Héroult in the late 1880s.[25]

The mineral zinc blende, more commonly known as sphalerite, in which indium can occur.

Thallium, the heaviest stable element in the boron group, was discovered by William Crookes and Claude-Auguste Lamy in 1861. Unlike gallium and indium, thallium had not been predicted by Dmitri Mendeleev, having been discovered before Mendeleev invented the periodic table. As a result, no one was really looking for it until the 1850s when Crookes and Lamy were examining residues from sulfuric acid production. In the spectra they saw a completely new line, a streak of deep green, which Crookes named after the Greek word θαλλός (thallos), referring to a green shoot or twig. Lamy was able to produce larger amounts of the new metal and determined most of its chemical and physical properties.[27][28]

Indium is the fourth element of the boron group but was discovered before the third, gallium, and after the fifth, thallium. In 1863 Ferdinand Reich and his assistant, Hieronymous Theodor Richter, were looking in a sample of the mineral zinc blende, also known as sphalerite (ZnS), for the spectroscopic lines of the newly discovered element thallium. Reich heated the ore in a coil of platinum metal and observed the lines that appeared in a spectroscope. Instead of the green thallium lines that he expected, he saw a new line of deep indigo-blue. Concluding that it must come from a new element, they named it after the characteristic indigo color it had produced.[27][29]

Gallium minerals were not known before August 1875, when the element itself was discovered. It was one of the elements that the inventor of the periodic table, Dmitri Mendeleev, had predicted to exist six years earlier. While examining the spectroscopic lines in zinc blende the French chemist Paul Emile Lecoq de Boisbaudran found indications of a new element in the ore. In just three months he was able to produce a sample, which he purified by dissolving it in a potassium hydroxide (KOH) solution and sending an electric current through it. The next month he presented his findings to the French Academy of Sciences, naming the new element after the Greek name for Gaul, modern France.[30][31]

The last confirmed element in the boron group, nihonium, was not discovered but rather created or synthesized. The element's synthesis was first reported by the Dubna Joint Institute for Nuclear Research team in Russia and the Lawrence Livermore National Laboratory in the United States, though it was the Dubna team who successfully conducted the experiment in August 2003. Nihonium was discovered in the decay chain of moscovium, which produced a few precious atoms of nihonium. The results were published in January of the following year. Since then around 13 atoms have been synthesized and various isotopes characterized. However, their results did not meet the stringent criteria for being counted as a discovery, and it was the later RIKEN experiments of 2004 aimed at directly synthesizing nihonium that were acknowledged by IUPAC as the discovery.[32]


The name "boron" comes from the Arabic word for the mineral borax,(بورق, boraq) which was known before boron was ever extracted. The "-on" suffix is thought to have been taken from "carbon"; so the name can regarded as a portmanteau of "borax" and "carbon".[33] Aluminium was named by Humphry Davy in the early 1800s. It is derived from the Greek word alumen, meaning bitter salt, or the Latin alum, the mineral.[34] Gallium is derived from the Latin Gallia, referring to France, the place of its discovery.[35] Indium comes from the Latin word indicum, meaning indigo dye, and refers to the element's prominent indigo spectroscopic line.[36] Thallium, like indium, is named after the Greek word for the color of its spectroscopic line: thallos, meaning a green twig or shoot.[37][38] "Nihonium" is named after Japan (Nihon in Japanese), where it was discovered.

Occurrence and abundance[edit]


Boron, with its atomic number of 5, is a very light element. Almost never found free in nature, it is very low in abundance, composing only 0.001% (10 ppm)[39] of the Earth's crust. It is known to occur in over a hundred different minerals and ores, however: the main source is borax, but it is also found in colemanite, boracite, kernite, tusionite, berborite and fluoborite.[40] Major world miners and extractors of boron include the United States, Turkey, Argentina, China, Bolivia and Peru. Turkey is by far the most prominent of these, accounting for around 70% of all boron extraction in the world. The United States is second, most of its yield coming from the state of California.[41]


Aluminium, in contrast to boron, is the most abundant metal in the Earth's crust, and the third most abundant element. It composes about 8.2% (82,000 ppm) of the Earth, surpassed only by oxygen and silicon.[39] It is like boron, however, in that it is uncommon in nature as a free element. This is due to aluminium’s tendency to attract oxygen atoms, forming several aluminium oxides. Aluminium is now known to occur in nearly as many minerals as boron, including garnets, turquoises and beryls, but the main source is the ore bauxite. The world's leading countries in the extraction of aluminium are Ghana, Surinam, Russia and Indonesia, followed by Australia, Guinea and Brazil.[42]


Gallium is a relatively rare element in the Earth's crust and is not found in as many minerals as its lighter homologues. Its abundance on the Earth is a mere 0.0018% (18 ppm).[39] Its production is very low compared to other elements, but has increased greatly over the years as extraction methods have improved. Gallium can be found as a trace in a variety of ores, including bauxite and sphalerite, and in such minerals as diaspore and germanite. Trace amounts have been found in coal as well.[43] The gallium content is greater in a few minerals, including gallite (CuGaS2), but these are too rare to be counted as major sources and make negligible contributions to the world's supply.


Indium is another rare element in the boron group. Even less abundant than gallium at only 0.000005% (0.05 ppm),[39] it is the 61st most common element in the earth's crust. Very few indium-containing minerals are known, all of them scarce: an example is indite. Indium is found in several zinc ores, but only in minute quantities; likewise some copper and lead ores contain traces. As is the case for most other elements found in ores and minerals, the indium extraction process has become more efficient in recent years, ultimately leading to larger yields. Canada is the world's leader in indium reserves, but both the United States and China have comparable amounts.[44]


A small bundle of fiberglass

Thallium is neither rare nor common in the Earth's crust, but falls somewhere in the middle. Its abundance is estimated to be 0.00006% (0.6 ppm).[39] Thallium is the 56th most common element in the earth's crust, more abundant than indium by a sizeable amount. It is found on the ground in some rocks, in the soil and in clay. Many sulfide ores of iron, zinc and cobalt contain thallium. In minerals it is found in moderate quantities: some examples are crookesite (in which it was first discovered), lorandite, routhierite, bukovite, hutchinsonite and sabatierite. There are other minerals that contain small amounts of thallium, but they are very rare and do not serve as primary sources. Macedonia is a notable thallium extractor and producer.


Nihonium is an element that is never found in nature but has been created in a laboratory. It is therefore classified as a synthetic element with no stable isotopes.


With the exception of synthetic nihonium, all the elements in the boron group have numerous uses and applications in the production and content of many items.

Boron has found many industrial applications in recent decades, and new ones are still being found. A common application is in fiberglass.[45] There has been rapid expansion in the market for borosilicate glass; most notable among its special qualities is a much greater resistance to thermal expansion than regular glass. Another commercially expanding use of boron and its derivatives is in ceramics. Several boron compounds, especially the oxides, have unique and valuable properties that have led to their substitution for other materials that are less useful. Boron may be found in pots, vases, plates, and ceramic pan-handles for its insulating properties. The compound borax is used in bleaches, for both clothes and teeth. The hardness of boron and some of its compounds give it a wide array of additional uses. A small part (5%) of the boron produced finds use in agriculture.[45]

Aluminium is a metal with numerous familiar uses in everyday life. It is most often encountered in construction materials, in electrical devices, especially as the conductor in cables, and in tools and vessels for cooking and preserving food. Aluminium's lack of reactivity with food products makes it particularly useful for canning. Its high affinity for oxygen makes it a powerful reducing agent. Finely powdered pure aluminium oxidizes rapidly in air, generating a huge amount of heat in the process (burning at about 5500 °F or 3037 °C), leading to applications in welding and elsewhere that a large amount of heat is needed. Aluminium is a component of alloys used for making lightweight bodies for aircraft. Cars also sometimes incorporate aluminium in their framework and body, and there are similar applications in military equipment. Less common uses include components of decorations and some guitars. The element is also sees use in a diverse range of electronics.[46][47]

Gallium is one of the chief components of blue LEDs

Gallium and its derivatives have only found applications in recent decades. Gallium arsenide has been used in semiconductors, in amplifiers, in solar cells (for example in satellites) and in tunnel diodes for FM transmitter circuits. Gallium alloys are used mostly for dental purposes. Gallium ammonium chloride is used for the leads in transistors.[48] A major application of gallium is in LED lighting. The pure element has been used as a dopant in semiconductors,[citation needed] and has additional uses in electronic devices with other elements. Gallium has the property of being able to 'wet' glass and porcelain, and thus can be used to make mirrors and other highly reflective objects. Gallium can be added to alloys of other metals to lower their melting points.

Indium's uses can be divided into four categories: the largest part (70%) of the production is used for coatings, usually combined as indium tin oxide (ITO); a smaller portion (12%) goes into alloys and solders; a similar amount is used in electrical components and in semiconductors; and the final 6% goes to minor applications.[49] Among the items in which indium may be found are platings, bearings, display devices, heat reflectors, phosphors, and nuclear control rods. Indium tin oxide has found a wide range of applications, including glass coatings, solar panels, streetlights, electrophosetic displays (EPDs), electroluminescent displays (ELDs), plasma display panels (PDPs), electrochemic displays (ECs), field emission displays (FEDs), sodium lamps, windshield glass and cathode ray tubes, making it the single most important indium compound.[50]

Thallium is used in its elemental form more often than the other boron-group elements. Uncompounded thallium is used in low-melting glasses, photoelectric cells, switches, mercury alloys for low-range glass thermometers, and thallium salts. It can be found in lamps and electronics, and is also used in myocardial imaging. The possibility of using thallium in semiconductors has been researched, and it is a known catalyst in organic synthesis. Thallium hydroxide (TlOH) is used mainly in the production of other thallium compounds. Thallium sulfate (Tl2SO4) is an outstanding vermin-killer, and it is a principal component in some rat and mouse poisons. However, the United States and some European countries have banned the substance because of its high toxicity to humans. In other countries, though, the market for the substance is growing. Tl2SO4 is also used in optical systems.[51]

Biological role[edit]

None of the group-13 elements has a major biological role in complex animals, but some are at least associated with a living being. As in other groups, the lighter elements usually have more biological roles than the heavier. The heaviest ones are toxic, as are the other elements in the same periods. Boron is essential in most plants, whose cells use it for such purposes as strengthening cell walls. It is found in humans, certainly as a trace element, but there is ongoing debate over its significance in human nutrition. Boron's chemistry does allow it to form complexes with such important molecules as carbohydrates, so it is plausible that it could be of greater use in the human body than previously thought. Boron has also been shown to be able to replace iron in some of its functions, particularly in the healing of wounds.[52] Aluminium has no known biological role in plants or animals. Gallium is not essential for the human body, but its relation to iron(III) allows it to become bound to proteins that transport and store iron.[53] Gallium can also stimulate metabolism. Indium and its heavier homologues have no biological role, although indium salts in small doses, like gallium, can stimulate metabolism.[29]


All of the elements in the boron group can be toxic, given a high enough dose. Some of them are only toxic to plants, some only to animals, and some to both.

As an example of boron toxicity, it has been observed to harm barley in concentrations exceeding 20 mM.[54] The symptoms of boron toxicity are numerous in plants, complicating research: they include reduced cell division, decreased shoot and root growth, decreased production of leaf chlorophyll, inhibition of photosynthesis, lowering of stomata conductance, reduced proton extrusion from roots, and deposition of lignin and suborgin.[55]

Aluminium does not present a prominent toxicity hazard in small quantities, but very large doses are slightly toxic. Gallium is not considered toxic, although it may have some minor effects. Indium is not toxic and can be handled with nearly the same precautions as gallium, but some of its compounds are slightly to moderately toxic.

Thallium, unlike gallium and indium, is extremely toxic, and has caused many poisoning deaths. Its most noticeable effect, apparent even from tiny doses, is hair loss all over the body, but it causes a wide range of other symptoms, disrupting and eventually halting the functions of many organs. The nearly colorless, odorless and tasteless nature of thallium compounds has led to their use by murderers. The incidence of thallium poisoning, intentional and accidental, increased when thallium (with its similarly toxic compound, thallium sulfate) was introduced to control rats and other pests. The use of thallium pesticides has therefore been prohibited since 1975 in many countries, including the USA.

Nihonium is a highly unstable element and decays by emitting alpha particles. Due to its strong radioactivity, it would definitely be extremely toxic, although significant quantities of nihonium (larger than a few atoms) have not yet been assembled.[56]


  1. ^ To this date, no nihonium compounds have been synthesized, and all proposed compounds are entirely theoretical.


  1. ^ a b Kotz, John C.; Treichel, Paul & Townsend, John Raymond (2009). Chemistry and chemical reactivity. 2. Belmont, Ca, USA: Thomson Books. p. 351. ISBN 0-495-38712-6. 
  2. ^ "Earth Metals, Aluminium". Scribd. Retrieved March 11, 2013. 
  3. ^ "Soviet Aluminium from Clay". New Scientist. One Shilling Weekly. 8 (191): 89. 1960. 
  4. ^ Dobbs, Michael (2009). Clinical neurotoxicology: syndromes, substances, environments. Philadelphia, Pa: Saunders. pp. 276–278. ISBN 978-0-323-05260-3. 
  5. ^ a b c Harding, A., Charlie; Johnson, David; Janes, Rob (2002). Elements of the p block. Cambridge, UK: The Open University. p. 113. ISBN 0-85404-690-9. 
  6. ^ Raghavan, P. S. (1998). Concepts And Problems In Inorganic Chemistry. New Delhi, India: Discovery Publishing House. p. 43. ISBN 81-7141-418-4. 
  7. ^ Cole, M. L.; Hibbs, D. E.; Jones, C.; Smithies, N. A. (2000). "Phosphine and phosphido indium hydride complexes and their use in inorganic synthesis". Journal of the Chemical Society, Dalton Transactions (4): 545–550. doi:10.1039/A908418E. 
  8. ^ a b Downs, pp. 197–201
  9. ^ Daintith, John (2004). Oxford dictionary of chemistry. Market House Books. ISBN 978-0-19-860918-6. 
  10. ^ Bleshinsky, S. V.; Abramova, V. F. (1958). Химия индия (in Russian). Frunze. p. 301. 
  11. ^ Downs, pp. 195–196
  12. ^ Henderson, p. 6
  13. ^ Jellison, G. E.; Panek, L. W.; Bray, P. J.; Rouse, G. B. (1977). "Determinations of structure and bonding in vitreous B2O3 by means of B10, B11, and O17 NMR". The Journal of Chemical Physics. 66 (2): 802. Bibcode:1977JChPh..66..802J. doi:10.1063/1.433959. Retrieved June 16, 2011. 
  14. ^ Henderson, p. 60
  15. ^ Young, J. P.; Haire, R. G.; Peterson, J. R.; Ensor, D. D.; Fellow, R. L. (1981). "Chemical Consequences of Radioactive Decay. 2. Spectrophotometric Study of the Ingrowth of Berkelium-249 and Californium-249 Into Halides of Einsteinium-253". Inorganic Chemistry. 20 (11): 3979–3983. doi:10.1021/ic50225a076. 
  16. ^ Francis, William (1918). "The Chemical Gazette, or Journal of Practical Chemistry". XVI. Boston, Ma: 269. 
  17. ^ Roza, Greg (2010). The Halogen Elements: Fluorine, Chlorine, Bromine, Iodine, Astatine. NY, New York, USA: The Rozen Publishing Group, Inc. p. 33. ISBN 978-1-4358-3556-6. 
  18. ^ Girard, James E. (2010). Criminalistics: Forensic Science, Crime and Terrorism. Jones & Bartlett Learning. p. 221. ISBN 978-0-7637-7731-9. 
  19. ^ Henderson, p. 57
  20. ^ Barrett, Jack (2001). Structure and bonding. Cambridge, UK: The Royal Society of Chemistry. p. 91. ISBN 0-85404-647-X. 
  21. ^ Protchenko, Andrey V.; Dange, Deepak; Harmer, Jeffrey R.; Tang, Christina Y.; Schwarz, Andrew D.; Kelly, Michael J.; Phillips, Nicholas; Tirfoin, Remi; Birjkumar, Krishna Hassomal; Jones, Cameron; Kaltsoyannis, Nikolas; Mountford, Philip; Aldridge, Simon (16 February 2014). "Stable GaX2, InX2 and TlX2 radicals". Nature Chemistry. 6 (4): 315–319. Bibcode:2014NatCh...6..315P. doi:10.1038/nchem.1870. PMID 24651198. 
  22. ^ Aldridge, Simon; Downs, Anthony J.; Downs, Tony (2011). The Group 13 Metals Aluminium, Gallium, Indium and Thallium: Chemical Patterns and Peculiarities. John Wiley & Sons. p. ii. ISBN 978-0-470-68191-6. 
  23. ^ Downs, pp. 19–24
  24. ^ Krebs, Robert E. (2006). The History and Use of Our Earth's Chemical Elements: A Reference Guide. Greenwood Press. p. 176. ISBN 978-0-313-33438-2. 
  25. ^ a b c Weeks, Mary Elvira (1932). "The discovery of the elements. XII. Other elements isolated with the aid of potassium and sodium: Beryllium, boron, silicon, and aluminium". Journal of Chemical Education. 9 (8): 1386. Bibcode:1932JChEd...9.1386W. doi:10.1021/ed009p1386. 
  26. ^ Downs, p. 15
  27. ^ a b Weeks, Mary Elvira (1932). "The discovery of the elements. XIII. Some spectroscopic discoveries". Journal of Chemical Education. 9 (8): 1413. Bibcode:1932JChEd...9.1413W. doi:10.1021/ed009p1413. 
  28. ^ Enghag, Per (2004). Encyclopedia of the elements: technical data, history, processing, applications. p. 71. ISBN 978-3-527-30666-4. 
  29. ^ a b Emsley, p. 192
  30. ^ Emsley, pp. 158–159
  31. ^ Weeks, Mary Elvira (1932). "The discovery of the elements. XV. Some elements predicted by Mendeleeff". Journal of Chemical Education. 9 (9): 1605–1619. Bibcode:1932JChEd...9.1605W. doi:10.1021/ed009p1605. 
  32. ^ Oganessian, Yu. Ts.; Utyonkoy, V.; Lobanov, Yu.; Abdullin, F.; Polyakov, A.; Shirokovsky, I.; Tsyganov, Yu.; Gulbekian, G.; Bogomolov, S. (2004). "Experiments on the synthesis of element 115 in the reaction 243Am(48Ca,xn)291−x115". Physical Review C. 69 (2): 021601. Bibcode:2004PhRvC..69b1601O. doi:10.1103/PhysRevC.69.021601. 
  33. ^ Lavrova, Natalie (2010). Word-Building Strategies in Modern English. Germany: GRIN Verlag. p. 95. ISBN 978-3-640-53719-8. 
  34. ^ Bugarski, Ranko (2000). Tomić, Olga Mišeska; Milorad, Radovanović, eds. History and perspectives of language study. Amsterdam, the Netherlands: John Benjamins Publishing Co. p. 211. ISBN 90-272-3692-5. 
  35. ^ Weeks, Mary Elvira (1932). "The discovery of the elements. XIII. Some elements predicted by Mendeleeff". Journal of Chemical Education. 9 (9): 1605–1619. Bibcode:1932JChEd...9.1605W. doi:10.1021/ed009p1605. 
  36. ^ Venetskii, S. (1971). "Indium". Metallurgist. 15 (2): 148–150. doi:10.1007/BF01088126. 
  37. ^ Harper, Douglas. "thallium". Online Etymology Dictionary. 
  38. ^ Weeks, Mary Elvira (1932). "The discovery of the elements. XIII. Supplementary note on the discovery of thallium". Journal of Chemical Education. 9 (12): 2078. Bibcode:1932JChEd...9.2078W. doi:10.1021/ed009p2078. 
  39. ^ a b c d e Kotz, John C.; Treichel, Paul & Townsend, John Raymond (2009). Chemistry and chemical reactivity. 2. Belmont, Ca, USA: Thomson Books. p. 979. ISBN 0-495-38712-6. 
  40. ^ Klein, Cornelis and Hurlbut, Cornelius Jr. (1985) Manual of Mineralogy, Wiley, 20th ed., pp. 343–347, ISBN 0-471-80580-7
  41. ^ Zbayolu, G.; Poslu, K. (1992). "Mining and Processing of Borates in Turkey". Mineral Processing and Extractive Metallurgy Review. 9 (1–4): 245–254. doi:10.1080/08827509208952709. 
  42. ^ Emsley, pp. 22–26
  43. ^ Shan Xiao-quan; Wang Wen & Wen Bei (1992). "Determination of gallium in coal and coal fly ash by electrothermal atomic absorption spectrometry using slurry sampling and nickel chemical modification". Journal of Analytical Atomic Spectrometry. 7 (5): 761. doi:10.1039/JA9920700761. 
  44. ^ Schwarz-Schampera, Ulrich; M. Herzig; Peter; für Geowissenschaften & Rohstoffe, Bundesanstalt (2002). Indium: geology, mineralogy, and economics. Berlin, Germany: Springer-Verlag. p. 161. ISBN 3-540-43135-7. 
  45. ^ a b Roesky, H.W.; Atwood, David A. (2003). Group 13 chemistry III: industrial applications. Berlin, Germany: Springer-Verlag. pp. 3–10. ISBN 3-540-44105-0. 
  46. ^ Gregory, J. W. (2004). the elements of economic geology. Taylor & Francis. p. 152. 
  47. ^ Chatterjee, K. K. (2007). Uses Of Metals And Metallic Minerals. New Age International. p. 9. ISBN 978-81-224-2040-1. 
  48. ^ Chandler, Harry (1998). Metallurgy for the non-metallurgist. ASM International. p. 59. ISBN 0-87170-652-0. 
  49. ^ US Department of the Interior (2007). Minerals Yearbook: Metals And Minerals; 2005. Washington, DC: US Government Printing Office. pp. 36–1. ISBN 978-1-4113-1980-6. 
  50. ^ Schwarz-Schampera, Ulrich; M. Herzig, Peter; für Geowissenschaften und Rohstoffe, Bundesanstal (2002). Indium: geology, mineralogy, and economics. Berlin, Germany: Springer-Verlag. p. 169. ISBN 3-540-43135-7. 
  51. ^ Mager, Jeanne (1998). Encyclopaedia of Occupational Health and Safety. Geneva, Switzerland: International Labor Organization Publications. p. section 63.40. ISBN 978-92-2-109816-4. 
  52. ^ Reilly, Conor (2004). The nutritional trace metals. Ames, Iowa: Blackwell Publishing. p. 217. ISBN 1-4051-1040-6. 
  53. ^ Crichton, Robert R. (2008). Biological inorganic chemistry: an introduction. UK. p. 9. ISBN 978-0-444-52740-0. 
  54. ^ Fangsen, Xu (2007). Advances in plant and animal boron nutrition. Dordrecht, Netherlands: Springer. p. 84. ISBN 1-4020-5382-7. 
  55. ^ Lovatt, Carol J.; Bates, Loretta M. (1984). "Early effects of excess boron on photosynthesis and growth". Journal of Experimental Botany. 35 (3): 297–305. doi:10.1093/jxb/35.3.297. 
  56. ^ Dobbs, Michael (2009). Clinical neurotoxicology: syndromes, substances, environments. Philadelphia: Saunders. p. 277. ISBN 978-0-323-05260-3. 


External links[edit]