Jump to content

HP (car)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Look2See1 (talk | contribs) at 10:36, 3 January 2016 (References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

HP
Overview
ManufacturerHilton-Peacey Motors
Production1926-1928
Body and chassis
Classcyclecar
Body styleopen two-seat
Powertrain
EngineJAP single-cylinder
Transmissionchain drive
Dimensions
Wheelbase78 in (1,981 mm)[1]
Chronology
Successornone

The HP was a British three-wheeled cyclecar made from 1926 to 1928 by Hilton-Peacey (possibly Pacey) Motors of Woking, Surrey.

Most cars used an air-cooled 500 cc single-cylinder JAP engine but one had a larger 600 cc version and another two 500 cc Dunelt 2 strokes and three 500 cc Vulpine overhead valve engines.[2] The drive was by chain to a Sturmey-Archer three-speed transmission and then a further long chain to the single rear wheel.[3] Several of the components including front axles were bought from the Blériot-Whippet company which had closed down. Hilton-Peacey Motors also offered to supply spares to Blériot-Whippet owners.[3]

The body was made largely of plywood covered in fabric. The chassis was made of laminated ash and the front axle was carried on quarter elliptic leaf springs. To simplify the transmission the back wheel was unsprung.

Four people were employed including Hilton Skinner and Bob Peacey and about 40 cars were made.[2] They sold for £65.[3]

See also

References

  1. ^ Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN 0-333-16689-2.
  2. ^ a b G.N. Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN 1-57958-293-1.
  3. ^ a b c Baldwin, N. (1994). A-Z of Cars of the 1920s. Devon, UK: Bay View Books. ISBN 1-870979-53-2.