|This article needs additional citations for verification. (August 2008) (Learn how and when to remove this template message)|
Hayman drums were introduced in the late 1960s, being made by an English manufacturer. The idea was to come up with a drum series to compete with the success of the large American companies of the time.
The shells were thin walled with rings, and painted white with what they called "Vibrasonic" interiors. The lugs were essentially a copy of the Camco design. Hayman was out of business by 1975.
The company started with the name George Hayman on the badge, then shortened it to just Hayman in later years.
- Trevor Morais of The Peddlers
- Michael Giles of King Crimson
- Etienne Jacobs of Kremlin Picon Blues The Sparrows
- Jim Capaldi of Traffic
- Aynsley Dunbar in the early 1970s
- Derek Ballard of A Band Called O
- Bill Bruford of Yes and King Crimson
- Simon Kirke of Free
- Wilgar Campbell of Rory Gallagher band
- Ted McKenna (until 1978) of Rory Gallagher band
- John Wilson of Taste
- Rob Townsend of Family
- Ric Parnell of Atomic Rooster
- Guy Evans of Van Der Graaf Generator
- Mick Avory of The Kinks
- Randy Jones of Maynard Ferguson
- Paul Hammond of Atomic Rooster
- Brian Bennett of The Shadows
- Ronnie Verrell of the Syd Lawrence Big Band and Ted Heath Orchestra
- Bob Henrit of Argent and The Kinks
Dating Hayman Drums
- If the badge and/or snare strainer says "George Hayman", then it is from 1968-69.
- If the badge is a 4 cm brass one with "Hayman - then it is around 1969-73
- If the badge is smaller and silver then it is one of the last to be made during 74/75.
Also, each round badge on a Hayman drum has a patent number - giving the year of manufacture within the patent number.
|This section does not cite any sources. (February 2010) (Learn how and when to remove this template message)|
"They were the brainchild of Ivor Arbiter who besides being the first to actually bring guitars into Britain in quantity was also the first to import Ludwig and Gretsch drums during the `beat boom'. It was he who, in the sixties, cleverly identified a gap in the market for a LOUD drum set at a time when drummers were seldom miked-up outside of the studio. The original plan was to affix metal liners inside the shells of rather ordinary beech Carlton drums and, indeed, some of these were actually made. Ultimately they discarded the metal inserts, which were weighty and expensive and instead chose to thickly coat the drums' interior surfaces. Bingo! Loud and extremely cutting drums were here.
Originally the drums were named George Hayman after one of the guys ` in Dallas-Arbiter's Shoeburyness factory (whose surname, to confuse things further, was actually Haymon) and, possibly, George Way who made the legendary Camcos. In further homage to that famous American marque, the set's lugs were also made circular, which was well avant-garde at the time. Anyway, the name was eventually shortened to the more identifiable Hayman.
The drums had a mixture of features which, prior to 1969, would only be seen on expensive American products. Triple-flange hoops, which gave a more open sound, very new to British drums, as were non-telescopic spurs, adjustable, swivelling shell mounts and cymbal arms and an abundance of tension screws and Remo heads.
Dallas-Arbiter designed their own cumbersome tom holder too, which might well have looked good on the drawing board, but in reality was something of a nightmare. A flat, curved and slotted rail was jacked up a little above the bass drum shell and to this was attached the body of the cast tom holder itself. This was fitted with not one, but two ratchets and by judicious use of both you could actually have exceedingly limited horizontal height adjustment. A radial-toothed block was fixed to the tom which mated with a ratchet on the holder to maintain its playing angle, and very large capstan nuts locked tom to holder and holder to bass drum rail. These capstans had an annoying tendency to crush your fingers against the drum and were neither particularly stable nor hard wearing. But at the time, it was the best around. Hayman spurs were modelled on Ludwig type outrigger designs, but with large, cast circular holder blocks which matched the nut boxes and also located the tom legs. Hayman's 'lightning-bolt' bass drum tensioners were the first that were ergonomically designed to ease operation - they were shaped to accommodate the thumbs better.
The Dallas-Arbiter company also produced pretty good double-braced, tripod-based stands and pedals called Speedamatic, which were actually a lot more substantial and sophisticated than the majority of their competition. They're no doubt still seeing service in drum sets almost a quarter of a century after their conception. The snare stand was the first in Britain to use a basket-holding mechanism while the wide, industrial-fibre-belted bass pedal and double-sprung hi-hat (both featuring easily adjustable springs) were particularly were worthy. They were more rugged than just about anything else on the market, although the extremely chunky, scalloped cast screws which arrested all the adjustable bits did leave something to be desired.
Initially the Hayman snare drums all had 5½" deep wooden shells in common with the rest of the drums, but a year or so later aluminium-shelled versions were introduced. They were loosely modelled along the lines of Ludwig's 400, although in appearance, their shells were much more like Gretsch's. I'm told they didn't make too many metal drums so they’re evidently quite collectable.
After the "Beverley Cosmic 21", Hayman were amongst the first non-American snare drums to have ten tensioners per head and boasted a simple, but effective American-style on/off strainer attached to a 22 strand snare too. Unlike the"21", they also had an American-style swivelling damper like Ludwig's.
Size-wise Hayman sets originally came with 22", 20" or 18" bass drums and 12", 13", 14" and 16" toms, but eventually 24", 26" and even 28" basses appeared. The jazzers of the time went for the 18"x 12", 12"x8" and 14"x14" Recording outfit, while the rockers went for the larger-sized Showmans.
The secret of the Hayman sound was in the interior coating. It was rather grandly called Vibrasonic but was simply a thickish, sprayed-on coat of ordinary white polyurethane paint (originally with an unfortunate tendency to craze). Its function was to harden the surface of the drum, allowing the sound to bounce around inside and give more `crack'. Hayman drums didn't sound exactly warm but, for the mostly un-amplified drummers of the time, fitted the bill exactly. They cut through any sort of music at high levels.
The original Haymans were only available in three brushed metallic finishes: Solid Silver, Gold Ingot and Midnight Blue, (Regal Red, Matt Black, Natural Pine and see-through Iceberg were introduced later) the first five of which were also used to cover refrigerators!
When they were first introduced in August 1969, a five drum Showman set without stands would have cost £265.
- True Brits, Bob Henrit, Rhythm Magazine
-  The Guitar Collection of Guy Mackenzie includes pictures of the Solid Silver Hayman drum kit he used in the 1970s.