|This is an old revision of this page, as edited by Dough34 at 16:48, 5 October 2013 (→Switches: fix capitalization). The present address (URL) is a permanent link to this revision, which may differ significantly from the .|
This article needs additional citations for verification. (February 2012) (Learn how and when to remove this template message)
This article may lend undue weight to certain ideas, incidents, or controversies. (February 2012) (Learn how and when to remove this template message)
Head-of-line blocking (HOL blocking) in computer networking is a performance-limiting phenomenon that occurs when a line of packets is held-up by the first packet, for example in input buffered network switches, out-of-order delivery, and multiple requests in HTTP pipelining.
A switch may be composed of buffered input ports, a switch fabric and buffered output ports. If first-in first-out (FIFO) input buffers are used, only the oldest packet is available for forwarding. More recent arrivals cannot be forwarded if the oldest packet cannot be forwarded because its destination output is busy. The output may be busy if:
- There is output contention (see diagram)
- Or most commonly when the output buffer is full - congestion (for example the combined rate of multiple inputs exceeds the output rate)
Without HOL blocking, the new arrivals could potentially be forwarded around the stuck packet to their respective destinations. The phenomenon can have severe performance-degrading effects in input-buffered systems.
Effect on switch performance
This phenomenon limits the throughput of switches. For FIFO input buffers, a simple model of fixed-sized cells to uniformly distributed destinations, causes the throughput to be limited to 58.6% of the total as the number of links becomes large.
HOL can significantly increase packet reordering.
Overcoming HOL blocking
One way to overcome this limitation is by using Virtual Output Queues. Only switches with input buffering can suffer HOL blocking. With sufficient internal bandwidth, input buffering is unnecessary; all buffering is handled at outputs and HOL blocking is avoided. This no-input-buffering architecture is common in small to medium sized Ethernet switches.
Out-of-order delivery occurs when sequenced packets arrive out of order. This may happen due to different paths taken by the packets or from packets being dropped and resent.
- HTTP pipelining
- Network scheduler
- Stream Control Transmission Protocol (SCTP)
- Pipeline stall
- M. Karo; M. Hluchyj; S. Morgan (December 1987). "Input Versus Output Queuing on a Space-Division Packet Switch". IEEE Transactions on Communications. 35 (12): 1347–1356. doi:10.1109/TCOM.1987.1096719.
- Jon C. R. Bennett; Craig Partridge; Nicholas Shectman (December 1999). "Packet reordering is not pathological network behavior". IEEE/ACM Transactions on Networking. 7 (6): 789–798. doi:10.1109/90.811445.
- Nick McKeown; Adisak Mekkittikul; Venkat Anantharam; Jean Walrand (August 1999). "Achieving 100% Throughput in an Input-Queued Switch" (PDF). IEEE Transactions on Communications. 47 (8): 1260–1267. doi:10.1109/26.780463.