Ideal gas law
The classical Carnot heat engine
The ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behavior of many gases under many conditions, although it has several limitations. It was first stated by Émile Clapeyron in 1834 as a combination of Boyle's law and Charles's law. The ideal gas law is often written as:
Actually, the most conceptual and pure form of this law is:
where n denotes the number density. The ideal gas constant, being a dimensional constant, has in fact been eliminated. The law in this form is also readily derivable from kinetic theory, as was achieved (apparently independently) by August Krönig in 1856 and Rudolf Clausius in 1857.
The state of an amount of gas is determined by its pressure, volume, and temperature. The modern form of the equation relates these simply in two main forms. The temperature used in the equation of state is an absolute temperature: in the SI system of units, Kelvin.
The most frequently introduced form, holding only for systems with homogeneous composition, density, pressure and temperature inside the volume considered, is:
P is the average pressure of the gas
V is the total volume of the gas considered
N is the total amount of substance of gas (also known as number of moles)
T is the average temperature of the gas
In SI units, P is measured in pascals, V in cubic metres, N in moles, and T in Kelvin (The Kelvin scale is a shifted Celsius scale where 0.00 Kelvin = -273.15 degrees Celsius, the lowest possible temperature). R has the value 8.314 J·K−1·mol−1 or 0.08206 L·atm·mol−1·K−1or ≈2 calories if using pressure in standard atmospheres (atm) instead of pascals, and volume in litres instead of cubic metres.
How much gas is present could be specified by giving the mass instead of the chemical amount of gas. Therefore, an alternative form of the ideal gas law may be useful. The chemical amount (n) (in moles) is equal to the mass (m) (in grams) divided by the molar mass (M) (in grams per mole):
By replacing N with m / M:
and subsequently introducing density ρ = m/V, we get:
Defining the specific gas constant Rspecific as the ratio R/M,
Alternatively, the law may be written in terms of the specific volume v, the reciprocal of density, as
This form of the ideal gas law is very useful in the study of the thermodynamics of a fixed ideal gas (being a compound or a mixture of ideal gases), because it links its pressure, density (or specific volume), and temperature in a unique equation. It is common, especially in engineering applications, to represent the specific gas constant by the symbol R. In such cases, the universal gas constant is usually given a different symbol such as R0 to distinguish it. In any case, the context and/or units of the gas constant should make it clear as to whether the universal or specific gas constant is being referred to.
The most general (holding also for inhomogenous systems) and the most simple form of the ideal gas law is local:
where P is the absolute pressure of the gas; n is the number density; T is the absolute temperature. In the framework of SI they can be respectively measured in Pascals, in molecules per cubic meter, and in joules. Explicitly:
Notably with the statistical mechanics this equation has become no more a principle but has been derived from first principles.
If the temperature was in kelvin, the measure in joules could be simply obtained by multiplication with the Boltzmann constant:
so we could introduce this dimensional constant in the simple above equation:
Furthermore, (only) in an homogeneous system the local number density is equal to the average number density:
So we can further complicate the equation to approach the empirical form:
and the amount of substance can be expressed in moles rather in simple molecules by dividing for the Avogadro's number:
Finally, by comparing with the empirical form:
On the other hand in an inhomogeneous system, the local form is the only one applicable and the tentative to forcedly employ the empirical formula brings to misleading results. This is why in numerical simulations, ususally featuring inhomogenous systems, the empirical formula of ideal gas law is completely useless.
Applications to thermodynamic processes
The table below essentially simplifies the ideal gas equation for particular processes, thus making this equation easier to solve using numerical methods.
A thermodynamic process is defined as a system that moves from state 1 to state 2, where the state number is denoted by subscript. As shown in the first column of the table, basic thermodynamic processes are defined such that one of the gas properties (P, V, T, or S) is constant throughout the process.
For a given thermodynamics process, in order to specify the extent of a particular process, one of the properties ratios (which are listed under the column labeled "known ratio") must be specified (either directly or indirectly). Also, the property for which the ratio is known must be distinct from the property held constant in the previous column (otherwise the ratio would be unity, and not enough information would be available to simplify the gas law equation).
In the final three columns, the properties (P, V, or T) at state 2 can be calculated from the properties at state 1 using the equations listed.
||P2 = P1||V2 = V1(V2/V1)||T2 = T1(V2/V1)|
||P2 = P1||V2 = V1(T2/T1)||T2 = T1(T2/T1)|
||P2 = P1(P2/P1)||V2 = V1||T2 = T1(P2/P1)|
||P2 = P1(T2/T1)||V2 = V1||T2 = T1(T2/T1)|
||P2 = P1(P2/P1)||V2 = V1/(P2/P1)||T2 = T1|
||P2 = P1/(V2/V1)||V2 = V1(V2/V1)||T2 = T1|
(Reversible adiabatic process)
||P2 = P1(P2/P1)||V2 = V1(P2/P1)(−1/γ)||T2 = T1(P2/P1)(γ − 1)/γ|
||P2 = P1(V2/V1)−γ||V2 = V1(V2/V1)||T2 = T1(V2/V1)(1 − γ)|
||P2 = P1(T2/T1)γ/(γ − 1)||V2 = V1(T2/T1)1/(1 − γ)||T2 = T1(T2/T1)|
||P2 = P1(P2/P1)||V2 = V1(P2/P1)(-1/n)||T2 = T1(P2/P1)(n - 1)/n|
||P2 = P1(V2/V1)−n||V2 = V1(V2/V1)||T2 = T1(V2/V1)(1−n)|
||P2 = P1(T2/T1)n/(n − 1)||V2 = V1(T2/T1)1/(1 − n)||T2 = T1(T2/T1)|
^ a. In an isentropic process, system entropy (S) is constant. Under these conditions, P1 V1γ = P2 V2γ, where γ is defined as the heat capacity ratio, which is constant for a calorifically perfect gas. The value used for γ is typically 1.4 for diatomic gases like nitrogen (N2) and oxygen (O2), (and air, which is 99% diatomic). Also γ is typically 1.6 for monatomic gases like the noble gases helium (He), and argon (Ar). In internal combustion engines γ varies between 1.35 and 1.15, depending on constitution gases and temperature.
Deviations from ideal behavior of real gases
The equation of state given here applies only to an ideal gas, or as an approximation to a real gas that behaves sufficiently like an ideal gas. There are in fact many different forms of the equation of state. Since the ideal gas law neglects both molecular size and intermolecular attractions, it is most accurate for monatomic gases at high temperatures and low pressures. The neglect of molecular size becomes less important for lower densities, i.e. for larger volumes at lower pressures, because the average distance between adjacent molecules becomes much larger than the molecular size. The relative importance of intermolecular attractions diminishes with increasing thermal kinetic energy, i.e., with increasing temperatures. More detailed equations of state, such as the van der Waals equation, account for deviations from ideality caused by molecular size and intermolecular forces.
Since the end of the XIX century, ideal gas law is no more considered an empirical law nor a physical principle but it has been derivated as a consequence of the kinetic motion of gas particles under some special assumptions. The discipline that arrived to this result was the kinetic theory of gases, now become a branch of statistical mechanics.
The ideal gas law can also be derived from first principles using the kinetic theory of gases, in which several simplifying assumptions are made, chief among which are that the molecules, or atoms, of the gas are point masses, possessing mass but no significant volume, and undergo only elastic collisions with each other and the sides of the container in which both linear momentum and kinetic energy are conserved.
Let q = (qx, qy, qz) and p = (px, py, pz) denote the position vector and momentum vector of a particle of an ideal gas, respectively. Let F denote the net force on that particle. Then the time-averaged potential energy of the particle is:
By Newton's third law and the ideal gas assumption, the net force of the system is the force applied by the walls of the container, and this force is given by the pressure P of the gas. Hence
where dS is the infinitesimal area element along the walls of the container. Since the divergence of the position vector q is
the divergence theorem implies that
where dV is an infinitesimal volume within the container and V is the total volume of the container.
Putting these equalities together yields
which immediately implies the ideal gas law for N particles:
where n is the number density.
- Combined gas law
- Van der Waals equation
- Configuration integral
- Dynamic pressure
- Internal energy
- Gas constant
- Boltzmann constant
- Clapeyron, E (1834). "Mémoire sur la puissance motrice de la chaleur". Journal de l'École Polytechnique (in French) XIV: 153–90. Facsimile at the Bibliothèque nationale de France (pp. 153–90).
- Krönig, A. (1856). "Grundzüge einer Theorie der Gase". Annalen der Physik und Chemie (in German) 99 (10): 315–22. Bibcode:1856AnP...175..315K. doi:10.1002/andp.18561751008. Facsimile at the Bibliothèque nationale de France (pp. 315–22).
- Clausius, R. (1857). "Ueber die Art der Bewegung, welche wir Wärme nennen". Annalen der Physik und Chemie (in German) 176 (3): 353–79. Bibcode:1857AnP...176..353C. doi:10.1002/andp.18571760302. Facsimile at the Bibliothèque nationale de France (pp. 353–79).
- "Equation of State".
- Moran and Shapiro, Fundamentals of Engineering Thermodynamics, Wiley, 4th Ed, 2000
- Davis and Masten Principles of Environmental Engineering and Science, McGraw-Hill Companies, Inc. New York (2002) ISBN 0-07-235053-9
- Website giving credit to Benoît Paul Émile Clapeyron, (1799–1864) in 1834
- Configuration integral (statistical mechanics) where an alternative statistical mechanics derivation of the ideal-gas law, using the relationship between the Helmholtz free energy and the partition function, but without using the equipartition theorem, is provided.
- Online Ideal Gas law Calculator