This article may be incomprehensible or very hard to understand.Learn how and when to remove this template message)(June 2018) (
This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (June 2018) (Learn how and when to remove this template message)
In the context of differential equations to integrate an equation means to solve it from initial conditions. Accordingly, an integrable system is a system of differential equations whose behavior is determined by initial conditions and which can be integrated from those initial conditions.
Many systems of differential equations arising in physics are integrable. A standard example is the motion of a rigid body about its center of mass. This system gives rise to a number of conserved quantities: the angular momenta. Conserved quantities such as these are also known as the first integrals of the system. Roughly speaking, if there are enough first integrals to give a coordinate system on the set of solutions, then it is possible to reduce the original system of differential equations to an equation that can be solved by computing an explicit integral. Other examples giving rise to integrable systems in physics are some models of shallow water waves (Korteweg–de Vries equation), the nonlinear Schrödinger equation, and the Toda lattice in statistical mechanics.
While the presence of many conserved quantities is generally a fairly clear-cut criterion for integrability, there are other ways in which integrability can appear. It is famously difficult to be precise about what the term means. Nigel Hitchin (Hitchin, Segal & Ward, p. 1) draws a comparison to a quotation by jazz musician Louis Armstrong, who when asked what jazz was, is rumored to have replied "If you gotta ask, you'll never know." Hitchin identifies three generally recognizable features of integrable systems:
- the existence of many conserved quantities
- the presence of algebraic geometry
- the ability to give explicit solutions
- 1 Frobenius integrability (overdetermined differential systems)
- 2 General dynamical systems
- 3 Hamiltonian systems and Liouville integrability
- 4 Action-angle variables
- 5 The Hamilton–Jacobi approach
- 6 Solitons and inverse spectral methods
- 7 Quantum integrable systems
- 8 Exactly solvable models
- 9 List of some well-known classical integrable systems
- 10 See also
- 11 Notes
- 12 References
- 13 Further reading
- 14 External links
Frobenius integrability (overdetermined differential systems)
A differential system is said to be completely integrable in the Frobenius sense if the space on which it is defined has a foliation by maximal integral manifolds. The Frobenius theorem states that a system is completely integrable if and only if it generates an ideal that is closed under exterior differentiation. (See the article on integrability conditions for differential systems for a detailed discussion of foliations by maximal integral manifolds.)
General dynamical systems
In the context of differentiable dynamical systems, the notion of integrability refers to the existence of invariant, regular foliations; i.e., ones whose leaves are embedded submanifolds of the smallest possible dimension that are invariant under the flow. There is thus a variable notion of the degree of integrability, depending on the dimension of the leaves of the invariant foliation. This concept has a refinement in the case of Hamiltonian systems, known as complete integrability in the sense of Liouville (see below), which is what is most frequently referred to in this context.
An extension of the notion of integrability is also applicable to discrete systems such as lattices. This definition can be adapted to describe evolution equations that either are systems of differential equations or finite difference equations.
The distinction between integrable and nonintegrable dynamical systems thus has the qualitative implication of regular motion vs. chaotic motion and hence is an intrinsic property, not just a matter of whether a system can be explicitly integrated in exact form.
Hamiltonian systems and Liouville integrability
In the special setting of Hamiltonian systems, we have the notion of integrability in the Liouville sense, see the Liouville-Arnold theorem. Liouville integrability means that there exists a regular foliation of the phase space by invariant manifolds such that the Hamiltonian vector fields associated to the invariants of the foliation span the tangent distribution. Another way to state this is that there exists a maximal set of Poisson commuting invariants (i.e., functions on the phase space whose Poisson brackets with the Hamiltonian of the system, and with each other, vanish).
In finite dimensions, if the phase space is symplectic (i.e., the center of the Poisson algebra consists only of constants), then it must have even dimension , and the maximal number of independent Poisson commuting invariants (including the Hamiltonian itself) is . The leaves of the foliation are totally isotropic with respect to the symplectic form and such a maximal isotropic foliation is called Lagrangian. All autonomous Hamiltonian systems (i.e. those for which the Hamiltonian and Poisson brackets are not explicitly time dependent) have at least one invariant; namely, the Hamiltonian itself, whose value along the flow is the energy. If the energy level sets are compact, the leaves of the Lagrangian foliation are tori, and the natural linear coordinates on these are called "angle" variables. The cycles of the canonical -form are called the action variables, and the resulting canonical coordinates are called action-angle variables (see below).
There is also a distinction between complete integrability, in the Liouville sense, and partial integrability, as well as a notion of superintegrability and maximal superintegrability. Essentially, these distinctions correspond to the dimensions of the leaves of the foliation. When the number of independent Poisson commuting invariants is less than maximal (but, in the case of autonomous systems, more than one), we say the system is partially integrable. When there exist further functionally independent invariants, beyond the maximal number that can be Poisson commuting, and hence the dimension of the leaves of the invariant foliation is less than n, we say the system is superintegrable. If there is a regular foliation with one-dimensional leaves (curves), this is called maximally superintegrable.
When a finite-dimensional Hamiltonian system is completely integrable in the Liouville sense, and the energy level sets are compact, the flows are complete, and the leaves of the invariant foliation are tori. There then exist, as mentioned above, special sets of canonical coordinates on the phase space known as action-angle variables, such that the invariant tori are the joint level sets of the action variables. These thus provide a complete set of invariants of the Hamiltonian flow (constants of motion), and the angle variables are the natural periodic coordinates on the torus. The motion on the invariant tori, expressed in terms of these canonical coordinates, is linear in the angle variables.
The Hamilton–Jacobi approach
In canonical transformation theory, there is the Hamilton–Jacobi method, in which solutions to Hamilton's equations are sought by first finding a complete solution of the associated Hamilton–Jacobi equation. In classical terminology, this is described as determining a transformation to a canonical set of coordinates consisting of completely ignorable variables; i.e., those in which there is no dependence of the Hamiltonian on a complete set of canonical "position" coordinates, and hence the corresponding canonically conjugate momenta are all conserved quantities. In the case of compact energy level sets, this is the first step towards determining the action-angle variables. In the general theory of partial differential equations of Hamilton–Jacobi type, a complete solution (i.e. one that depends on n independent constants of integration, where n is the dimension of the configuration space), exists in very general cases, but only in the local sense. Therefore, the existence of a complete solution of the Hamilton–Jacobi equation is by no means a characterization of complete integrability in the Liouville sense. Most cases that can be "explicitly integrated" involve a complete separation of variables, in which the separation constants provide the complete set of integration constants that are required. Only when these constants can be reinterpreted, within the full phase space setting, as the values of a complete set of Poisson commuting functions restricted to the leaves of a Lagrangian foliation, can the system be regarded as completely integrable in the Liouville sense.
Solitons and inverse spectral methods
A resurgence of interest in classical integrable systems came with the discovery, in the late 1960s, that solitons, which are strongly stable, localized solutions of partial differential equations like the Korteweg–de Vries equation (which describes 1-dimensional non-dissipative fluid dynamics in shallow basins), could be understood by viewing these equations as infinite-dimensional integrable Hamiltonian systems. Their study leads to a very fruitful approach for "integrating" such systems, the inverse scattering transform and more general inverse spectral methods (often reducible to Riemann–Hilbert problems), which generalize local linear methods like Fourier analysis to nonlocal linearization, through the solution of associated integral equations.
The basic idea of this method is to introduce a linear operator that is determined by the position in phase space and which evolves under the dynamics of the system in question in such a way that its "spectrum" (in a suitably generalized sense) is invariant under the evolution, cf. Lax pair. This provides, in certain cases, enough invariants, or "integrals of motion" to make the system completely integrable. In the case of systems having an infinite number of degrees of freedom, such as the KdV equation, this is not sufficient to make precise the property of Liouville integrability. However, for suitably defined boundary conditions, the spectral transform can, in fact, be interpreted as a transformation to completely ignorable coordinates, in which the conserved quantities form half of a doubly infinite set of canonical coordinates, and the flow linearizes in these. In some cases, this may even be seen as a transformation to action-angle variables, although typically only a finite number of the "position" variables are actually angle coordinates, and the rest are noncompact.
Quantum integrable systems
There is also a notion of quantum integrable systems.
To explain quantum integrability, it is helpful to consider the free particle setting. Here all dynamics are one-body reducible. A quantum system is said to be integrable if the dynamics are two-body reducible. The Yang-Baxter equation is a consequence of this reducibility and leads to trace identities which provide an infinite set of conserved quantities. All of these ideas are incorporated into the quantum inverse scattering method where the algebraic Bethe Ansatz can be used to obtain explicit solutions. Examples of quantum integrable models are the Lieb-Liniger Model, the Hubbard model and several variations on the Heisenberg model. Some other types of quantum integrability are known in explicitly time-dependent quantum problems, such as the driven Tavis-Cummings model .
Exactly solvable models
In physics, completely integrable systems, especially in the infinite-dimensional setting, are often referred to as exactly solvable models. This obscures the distinction between integrability in the Hamiltonian sense, and the more general dynamical systems sense.
There are also exactly solvable models in statistical mechanics, which are more closely related to quantum integrable systems than classical ones. Two closely related methods: the Bethe ansatz approach, in its modern sense, based on the Yang–Baxter equations and the quantum inverse scattering method provide quantum analogs of the inverse spectral methods. These are equally important in the study of solvable models in statistical mechanics.
An imprecise notion of "exact solvability" as meaning: "The solutions can be expressed explicitly in terms of some previously known functions" is also sometimes used, as though this were an intrinsic property of the system itself, rather than the purely calculational feature that we happen to have some "known" functions available, in terms of which the solutions may be expressed. This notion has no intrinsic meaning, since what is meant by "known" functions very often is defined precisely by the fact that they satisfy certain given equations, and the list of such "known functions" is constantly growing. Although such a characterization of "integrability" has no intrinsic validity, it often implies the sort of regularity that is to be expected in integrable systems.
List of some well-known classical integrable systems
1. Classical mechanical systems (finite-dimensional phase space):
- Harmonic oscillators in n dimensions
- Central force motion (exact solutions of classical central-force problems)
- Two center Newtonian gravitational motion
- Geodesic motion on ellipsoids
- Neumann oscillator
- Lagrange, Euler, and Kovalevskaya tops
- Integrable Clebsch and Steklov systems in fluids
- Calogero–Moser–Sutherland model
- Swinging Atwood's Machine with certain choices of parameters
2. Integrable lattice models
3. Integrable systems of PDEs in 1 + 1 dimension
- Korteweg–de Vries equation
- Sine–Gordon equation
- Nonlinear Schrödinger equation
- AKNS system
- Boussinesq equation (water waves)
- Camassa-Holm equation
- Nonlinear sigma models
- Classical Heisenberg ferromagnet model (spin chain)
- Classical Gaudin spin system (Garnier system)
- Kaup-Kupershmidt equation
- Krichever-Novikov equation
- Landau–Lifshitz equation (continuous spin field)
- Benjamin–Ono equation
- Degasperis-Procesi equation
- Dym equation
- Three-wave equation
4. Integrable PDEs in 2 + 1 dimensions
- Kadomtsev–Petviashvili equation
- Davey–Stewartson equation
- Ishimori equation
- Novikov-Veselov equation
5. Other integrable systems of PDEs in higher dimensions
- V.E. Korepin, N. M. Bogoliubov, A. G. Izergin (1997). Quantum Inverse Scattering Method and Correlation Functions. Cambridge University Press. ISBN 978-0-521-58646-7.
- N. A. Sinitsyn; F. Li (2016). "Solvable multistate model of Landau-Zener transitions in cavity QED". Phys. Rev. A. 93 (6): 063859. arXiv: . Bibcode:2016PhRvA..93f3859S. doi:10.1103/PhysRevA.93.063859.
- F. Calogero (2008) Calogero-Moser system. Scholarpedia, 3(8):7216.
- N. A. Sinitsyn; V. Y. Chernyak (2017). "The Quest for Solvable Multistate Landau-Zener Models". arXiv: [quant-ph].
- A. Sergyeyev (2018). New integrable (3+1)-dimensional systems and contact geometry, Lett. Math. Phys. 108, no. 2, 359-376, arXiv:1401.2122
- V. I. Arnold (1997). Mathematical Methods of Classical Mechanics, 2nd ed. Springer. ISBN 978-0-387-96890-2.
- O. Babelon, D. Bernard, M. Talon (2003). Introduction to classical integrable systems. Cambridge University Press. doi:10.1017/CBO9780511535024. ISBN 0-521-82267-X.
- R.J. Baxter (1982). Exactly solved models in statistical mechanics. Academic Press Inc. [Harcourt Brace Jovanovich Publishers]. ISBN 978-0-12-083180-7.
- M. Dunajski (2009). Solitons, Instantons and Twistors,. Oxford University Press. ISBN 978-0-19-857063-9.
- L. D. Faddeev, L. A. Takhtajan (1987). Hamiltonian Methods in the Theory of Solitons. Addison-Wesley. ISBN 978-0-387-15579-1.
- A. T. Fomenko, Symplectic Geometry. Methods and Applications. Gordon and Breach, 1988. Second edition 1995, ISBN 978-2-88124-901-3.
- A. T. Fomenko, A. V. Bolsinov Integrable Hamiltonian Systems: Geometry, Topology, Classification. Taylor and Francis, 2003, ISBN 978-0-415-29805-6.
- H. Goldstein (1980). Classical Mechanics, 2nd. ed. Addison-Wesley. ISBN 0-201-02918-9.
- J. Harnad, P. Winternitz, G. Sabidussi, eds. (2000). Integrable Systems: From Classical to Quantum. American Mathematical Society. ISBN 0-8218-2093-1.
- J. Hietarinta, N. Joshi, F. Nijhoff (2016). Discrete systems and integrability. Cambridge University Press. doi:10.1017/CBO9781107337411. ISBN 978-1-107-04272-8.
- N Hitchin; G Segal; R Ward (1999), Integrable systems: Twistors, loop groups, and Riemann surfaces, Clarendon Press
- V. E. Korepin, N. M. Bogoliubov, A. G. Izergin (1997). Quantum Inverse Scattering Method and Correlation Functions. Cambridge University Press. ISBN 978-0-521-58646-7.
- V. S. Afrajmovich, V. I. Arnold, Yu. S. Il'yashenko, L. P. Shil'nikov. Dynamical Systems V. Springer. ISBN 3-540-18173-3.
- Giuseppe Mussardo. Statistical Field Theory. An Introduction to Exactly Solved Models of Statistical Physics. Oxford University Press. ISBN 978-0-19-954758-6.
- G. Sardanashvily (2015). Handbook of Integrable Hamiltonian Systems. URSS. ISBN 978-5-396-00687-4.
- A. Beilinson and V. Drinfeld, Quantization of Hitchin’s integrable system and Hecke eigensheaves 
- Donagi, R., Markman, E., Spectral covers, algebraically completely integrable Hamiltonian systems, and moduli of bundles, in “Integrable systems and quantum groups” (Montecatini Terme, 1993), Lecture Notes in Math., 1620, pp. 1-119, Springer, Berlin, 1996.
- Michèle Audin, Spinning Tops: A Course on Integrable Systems, Cambridge University Press