Interferometric modulator display

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 207.45.249.139 (talk) at 15:48, 13 September 2010 (Add french link). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The Interferometric Modulator (iMoD)[1] is a technology used in electronic displays that can create various colors through the interference of reflected light. The color is selected with an electrically switched light modulator comprising a microscopic cavity that is switched on and off using driver integrated circuits similar to those used to address LCD displays. An iMoD based reflective flat panel display can include hundreds of thousands of individually addressable iMoD elements. iMoD displays represent one of the foremost examples of a microelectromechanical systems (MEMS) based device.

In one state an iMoD subpixel reflects light at a specific wavelength and gives a pure, bright color at one intensity while in a second state it absorbs incident light and appears black to the viewer. The wing of butterflies employ the same phenomena.[2] When not being addressed, an iMoD display consumes very little power.

The iMoD was invented by Mark W. Miles,[3][2] a MEMS researcher and founder of Etalon, Inc., and (co-founder) of Iridigm Display Corporation.[3] Qualcomm took over the development of this technology after its acquisition of Iridigm in 2004[2], and subsequently formed Qualcomm MEMS Technologies (QMT).[4] Qualcomm has allowed commercialization of the technology under the trademarked name "Mirasol",[5] and this energy-efficient, biomimetic technology sees application and use in mobile phones,[1] etc.

Working principle

A pixel in an iMoD based display consists of one or more subpixels that are actually individual microscopic interferometric cavities similar in operation to Fabry-Pérot interferometers (etalons), and the scales in butterfly wings. While a simple etalon consists of two half-silvered mirrors, an iMoD comprises a reflective membrane which can move in relation to a semitransparent thin film stack.[6] With an air gap defined within this cavity, the iMoD behaves like an optically resonant structure whose reflected color is determined by the size of the airgap. Application of a voltage to the iMoD creates electrostatic forces which bring the membrane into contact with the thin film stack. When this happens the behavior of the iMoD changes to that of an induced absorber. The consequence is that almost all incident light is absorbed and no colors are reflected. It is this binary operation that is the basis for the iMoD's application in reflective flat panel displays. Since the display utilizes light from ambient sources, the display's brightness increases in high ambient environments (i.e. sunlight). In contrast, a back-lit LCD display suffers from incident light.

For a practical RGB display, a single RGB pixel is built from several subpixels, because the brightness of a monochromatic pixel is not adjusted. A monochromatic array of subpixels represents different brightness levels for each color, and for each pixel, there are three such arrays: red, green and blue.

Commercial uses

iMoD displays are now available in the commercial marketplace. QMT's displays, using iMoD technology, are found in the Acoustic Research ARWH1 Stereo Bluetooth headset device, the Showcare Monitoring system (Korea), the Hisense C108,[7] and mp3 applications from Freestyle Audio and Skullcandy. In the mobile phone marketplace, Taiwanese manufacturers Inventec and Cal-Comp have announced phones with mirasol displays, and LG claims to be developing 'one or more' handsets using mirasol technology. These products all have only 2-color (black plus one other) "bi-chromic" displays. None are full color.

Related technology

A similar technology to iMoD is time-multiplexed optical shutter (TMOS). A TMOS display uses an array of micromechanical devices (optical shutters) which, when activated, 'tap-out' light from a waveguide at the rear of the display. TMOS displays are efficient compared to LCD displays: Uni-Pixel notes that a TMOS display transmits 61% of the back-light, whereas a LCD display transmits only 5%. [8]

Notes

  1. ^ a b "Interferometric Modulator (iMoD) Technology Overview" (PDF). Qualcom. May 2008. Retrieved 2008-08-07.
  2. ^ a b c Product design, nature's way money.cnn.com, June 12 2007: 2:04 PM EDT
  3. ^ a b http://www.freepatentsonline.com/5835255.html free patents online.
  4. ^ http://query.nytimes.com/gst/fullpage.html?res=9A02EFDD1530F933A2575AC0A9629C8B63 NYTimes.com.
  5. ^ "Mirasol". Qualcomm. Feb 2009.
  6. ^ Miles, M.; Larson, E.; Chui, C.; Kothari, M.; Gally, B.; Batey, J. (2003), "Digital Paper for Reflective Displays", SID International Symposium, Boston, Massachusetts, pp. 209–215 {{citation}}: Missing or empty |title= (help)CS1 maint: location missing publisher (link)
  7. ^ Ultra Low-power Handset to Begin Shipping in China in 2008 PRNewswire, BARCELONA, Spain, February 11
  8. ^ "Uni-Pixel whitepaper" (PDF). June 2007. p. 5.


References

  • M. Mitchell Waldrop (November 2007). "Brilliant Displays". Scientific American. Scientific American, Inc. pp. 94–97. (subtitle) A new technology that mimics the way nature gives bright color to butterfly wings can make cell phone displays clearly legible, even in the sun's glare. {{cite news}}: |access-date= requires |url= (help); |format= requires |url= (help)
  • Duncan Graham-Rowe (October 2007). "Epaper Displays Video". Technology Review. Technology Review, Inc. (subtitle) A novel electronic-paper display developed by Qualcomm can deliver high-quality video images, making it more versatile than other e-paper technologies. {{cite news}}: |access-date= requires |url= (help); |format= requires |url= (help); Cite has empty unknown parameter: |1= (help)