An interstitial compound, or interstitial alloy, is a compound that is formed when an atom with a small enough radius sits in an interstitial “hole” in a metal lattice. Examples of small atoms are hydrogen, boron, carbon and nitrogen. The compounds are important industrially and include some transition-metal carbides and nitrides.
The idea of interstitial compounds was mooted in the late 1930s and they are often called Hagg phases after Hägg. Transition metals generally crystallise in either the hexagonal close packed or face centered cubic structures, both of which can be considered to be made up of layers of hexagonally close packed atoms. In both of these very similar lattices there are two sorts of interstice, or hole:
- 2 tetrahedral holes per metal atom, i.e. the hole is between four metal atoms
- 1 octahedral hole per metal atom, i.e. the hole is between six metal atoms
It was suggested by early workers that:
- the metal lattice was relatively unaffected by the interstitial atom
- the electrical conductivity was comparable to that of the pure metal
- there was a range of composition
- the type of interstice occupied was determined by the size of the atom
These were not viewed as compounds, but rather as solutions, of say carbon, in the metal lattice, with a limiting upper “concentration” of the smaller atom that was determined by the number of interstices available.
A more detailed knowledge of the structures of metals, and binary and ternary phases of metals and non metals shows that:
- generally at low concentrations of the small atom, the phase can be described as a solution, and this approximates to the historical description of an interstitial compound above.
- at higher concentrations of the small atom, phases with different lattice structures may be present, and these may have a range of stoichiometries.
- Wells 56486 (1962) Structural Inorganic Chemistry 3rd edition Oxford University Press