Lamport's bakery algorithm

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Lamport's bakery algorithm is a computer algorithm devised by computer scientist Leslie Lamport, which is intended to improve the safety in the usage of shared resources among multiple threads by means of mutual exclusion.

In computer science, it is common for multiple threads to simultaneously access the same resources. Data corruption can occur if two or more threads try to write into the same memory location, or if one thread reads a memory location before another has finished writing into it. Lamport's bakery algorithm is one of many mutual exclusion algorithms designed to prevent concurrent threads entering critical sections of code concurrently to eliminate the risk of data corruption.



Lamport envisioned a bakery with a numbering machine at its entrance so each customer is given a unique number. Numbers increase by one as customers enter the store. A global counter displays the number of the customer that is currently being served. All other customers must wait in a queue until the baker finishes serving the current customer and the next number is displayed. When the customer is done shopping and has disposed of his or her number, the clerk increments the number, allowing the next customer to be served. That customer must draw another number from the numbering machine in order to shop again.

According to the analogy, the "customers" are threads, identified by the letter i, obtained from a global variable.

Due to the limitations of computer architecture, some parts of Lamport's analogy need slight modification. It is possible that more than one thread will get the same number n when they request it; this cannot be avoided. Therefore, it is assumed that the thread identifier i is also a priority. A lower value of i means a higher priority and threads with higher priority will enter the critical section first.

Critical section[edit]

The critical section is that part of code that requires exclusive access to resources and may only be executed by one thread at a time. In the bakery analogy, it is when the customer trades with the baker and others must wait.

When a thread wants to enter the critical section, it has to check whether now is its turn to do so. It should check the number n of every other thread to make sure that it has the smallest one. In case another thread has the same number, the thread with the smallest i will enter the critical section first.

In pseudocode this comparison between threads a and b can be written in the form:

(na, ia) < (nb, ib) // ia - the customer number for thread a, na - the thread number for thread a

which is equivalent to:

(ia < ib) or ((ia == ib) and (na < nb))

Once the thread ends its critical job, it gets rid of its number and enters the non-critical section.

Non-critical section[edit]

The non-critical section is the part of code that doesn't need exclusive access. It represents some thread-specific computation that doesn't interfere with other threads' resources and execution.

This part is analogous to actions that occur after shopping, such as putting change back into the wallet.

Implementation of the algorithm[edit]


In Lamport's original paper, the entering variable is known as choosing, and the following conditions apply:

  • Words choosing [i] and number [i] are in the memory of process i, and are initially zero.
  • The range of values of number [i] is unbounded.
  • A process may fail at any time. We assume that when it fails, it immediately goes to its noncritical section and halts. There may then be a period when reading from its memory gives arbitrary values. Eventually, any read from its memory must give a value of zero.

Code examples[edit]


In this example, all threads execute the same "main" function, Thread. In real applications, different threads often have different "main" functions.

Note that as in the original paper, the thread checks itself before entering the critical section. Since the loop conditions will evaluate as false, this does not cause much delay.

 0   // declaration and initial values of global variables
 1   Entering: array [1..NUM_THREADS] of bool = {false};
 2   Number: array [1..NUM_THREADS] of integer = {0};
 4   lock(integer i) {
 5       Entering[i] = true;
 6       Number[i] = 1 + max(Number[1], ..., Number[NUM_THREADS]);
 7       Entering[i] = false;
 8       for (integer j = 1; j <= NUM_THREADS; j++) {
 9           // Wait until thread j receives its number:
10           while (Entering[j]) { /* nothing */ }
11           // Wait until all threads with smaller numbers or with the same
12           // number, but with higher priority, finish their work:
13           while ((Number[j] != 0) && ((Number[j], j) < (Number[i], i))) { /* nothing */ }
14       }
15   }
17   unlock(integer i) {
18       Number[i] = 0;
19   }
21   Thread(integer i) {
22       while (true) {
23           lock(i);
24           // The critical section goes here...
25           unlock(i);
26           // non-critical section...
27       }
28   }

PlusCal code[edit]

We declare N to be the number of processes, and we assume that N is a natural number.

ASSUME N \in Nat

We define P to be the set {1, 2, ... , N} of processes.

P == 1..N

The variables num and flag are declared as global.

--algorithm AtomicBakery {
variable num = [i \in P |-> 0], flag = [i \in P |-> FALSE];

The following defines LL(j, i) to be true iff <<num[j], j>> is less than or equal to <<num[i], i>> in the usual lexicographical ordering.

define { LL(j, i) == \/ num[j] < num[i]
                     \/ /\ num[i] = num[j]
                        /\ j =< i

For each element in P there is a process with local variables unread, max and nxt. Steps between consecutive labels p1, ..., p7, cs are considered atomic. The statement with (x \in S) { body } sets id to a nondeterministically chosen element of the set S and then executes body. A step containing the statement await expr can be executed only when the value of expr is TRUE.

process (p \in P)
  variables unread \in SUBSET P, 
            max \in Nat, 
            nxt \in P;
p1: while (TRUE) {
      unread := P \ {self} ;
      max := 0;
      flag[self] := TRUE;
p2:   while (unread # {}) {
        with (i \in unread) { unread := unread \ {i};
                              if (num[i] > max) { max := num[i]; }
p3:   num[self] := max + 1;
p4:   flag[self] := FALSE;
      unread := P \ {self} ;
p5:   while (unread # {}) {
        with (i \in unread) { nxt := i ; };
        await ~ flag[nxt];
p6:     await \/ num[nxt] = 0
              \/ LL(self, nxt) ;
        unread := unread \ {nxt};
        } ;
cs:   skip ;  \* the critical section;
p7:   num[self] := 0;

Java code[edit]

 1  List<Integer> tickets = new ArrayList<>(n); // ticket for threads in line, n - number of threads
 2  List<Boolean> entering = new ArrayList<>(n); // True when thread entering in line
 3  {
 4     for (int i = 0; i < n; i++) 
 5      {
 6           tickets.add(0);
 7           entering.add(false);
 8      }
 9  }
11  public void lock(int pid) // thread ID
12  {
13      entering.set(pid, true);
14      int max = 0;
15      for (int ticket : tickets)
16      {
17          max = Math.max(max, ticket);
18      }
19      tickets.set(pid, 1 + max); 
20      entering.set(pid, false);
21      for (int i = 0; i < tickets.size(); ++i)
22      {
23          if (i != pid)
24          {
25              while (entering.get(i)) { Thread.yield(); } // wait while other thread picks a ticket
26              while (tickets.get(i) != 0 && ( tickets.get(pid) > tickets.get(i)  ||
27                      (tickets.get(pid) == tickets.get(i) && pid > i)))
28              { Thread.yield(); }
29          }
30      }
31      // The critical section goes here...
32  }
34  public void unlock(int pid)
35  {
36    tickets.set(pid, 0);
37  }


Each thread only writes its own storage, only reads are shared. It is remarkable that this algorithm is not built on top of some lower level "atomic" operation, e.g. compare-and-swap. The original proof shows that for overlapping reads and writes to the same storage cell only the write must be correct. The read operation can return an arbitrary number. Therefore this algorithm can be used to implement mutual exclusion on memory that lacks synchronisation primitives, e.g., a simple SCSI disk shared between two computers.

The necessity of the variable Entering might not be obvious as there is no 'lock' around lines 7 to 13. However, suppose the variable was removed and two processes computed the same Number[i]. If the higher-priority process was preempted before setting Number[i], the low-priority process will see that the other process has a number of zero, and enters the critical section; later, the high-priority process will ignore equal Number[i] for lower-priority processes, and also enters the critical section. As a result, two processes can enter the critical section at the same time. The bakery algorithm uses the Entering variable to make the assignment on line 6 look like it was atomic; process i will never see a number equal to zero for a process j that is going to pick the same number as i.

When implementing the pseudo code in a single process system or under cooperative multitasking, it is better to replace the "do nothing" sections with code that notifies the operating system to immediately switch to the next thread. This primitive is often referred to as yield.

Lamport's bakery algorithm assumes a sequential consistency memory model. Few, if any, languages or multi-core processors implement such a memory model. Therefore correct implementation of the algorithm typically requires inserting fences to inhibit reordering.[1]

See also[edit]


  1. ^ Chinmay Narayan, Shibashis Guha, S.Arun-Kumar Inferring Fences in a Concurrent Program Using SC proof of Correctness

External links[edit]