Landfill mining and reclamation (LFMR) is a process whereby solid wastes which have previously been landfilled are excavated and processed. The function of landfill mining is to reduce the amount of landfill mass encapsulated within the closed landfill and/or temporarily remove hazardous material to allow protective measures to be taken before the landfill mass is replaced. In the process, mining recovers valuable recyclable materials, a combustible fraction, soil, and landfill space. The aeration of the landfill soil is a secondary benefit regarding the landfill's future use. The combustible fraction is useful for the generation of power. The overall appearance of the landfill mining procedure is a sequence of processing machines laid out in a functional conveyor system. The operating principle is to excavate, sieve and sort the landfill material.
The concept of mining was introduced as early as 1953 at the Hiriya landfill operated by the Dan Region Authority next to the city of Tel Aviv, Israel. Waste contains many resources with high value, the most notable of which are non-ferrous metals such as aluminium cans and scrap metal. The concentration of aluminium in many landfills is higher than the concentration of aluminum in bauxite from which the metal is derived.
Landfill mining is also possible in countries where land is not available for new landfill sites. In this instance landfill space can be reclaimed by the extraction of biodegradable waste and other substances then refilled with wastes requiring disposal.
Mining construction landfill sites is the simplest form of landfill mining. Construction landfills in the USA contain three basic components, wood, scrap metal and gypsum, or drywall, along with a minimal amount of other construction materials. The wood collected can be used as fuel in coal burning power plants and the scrap metal reprocessed. European landfills tend to have more masonry from demolished bricks, tiles and concrete.
Mining of municipal landfills is more complicated and has to be based on the expected content of the landfill. Older landfills, in the United States before 1994, were often capped and closed, essentially entombing the waste. This can be beneficial for waste recovery. It can also create a higher risk for toxic waste and leachate exposure as the landfill has not fully processed the stewing wastes. Mining of bioreactor landfills and properly stabilized modern sanitary landfills provides its own benefits. The biodegradable wastes are more easily sieved out, leaving the non-biodegradable materials readily accessible. The quality of these materials for recycling and reprocessing purposes is not as high as initially recycled materials, however materials such as aluminum and steel are usually excluded from this.
Landfill mining is most useful as a method to remediate hazardous landfills. Landfills that were established before landfill liner technology was well established often leak their unprocessed leachate into underlying aquifers. This is both an environmental hazard and also a legal liability. In the US, the Environmental Protection Agency requires closed landfills to be monitored for at least 30 years after waste placement ceases. Mining the landfill simply to lay a safe liner is a last, but sometimes necessary resort.
The parts of the mining process are the different mining machines. Depending on the complexity of the process more or fewer machines can be used. Machinery is easily transported on trucks from site to site, mounted on trailers.
An excavator or front end loader uncovers the landfilled materials and places them on a moving floor conveyor belt to be taken to the sorting machinery. A trommel is used to separate materials by size. First, a large trommel separates materials like appliances and fabrics. A smaller trommel then allows the biodegraded soil fraction to pass through leaving non-biodegradable, recyclable materials on the screen to be collected.
An electromagnet is used to remove the ferrous material from the waste mass as it passes along the conveyor belt.
A front end loader is used to move sorted materials to trucks for further processing.
Odor control sprayers are wheeled tractors with a cab and movable spray arm mounted on a rotating platform. A large reservoir tank mounted behind the cab holds neutralizing agents, usually in liquid form, to reduce the smell of exposed wastes.
Depending on the level of resource recovery, material can be put through an air classifier which separates light organic material from heavy organic material. The separate streams are then loaded, by front end loaders, onto trucks either for further processing or for sale. Further manual processing can be done on site if processing facilities are too far away to justify the transportation costs.
- Waste picker
- Urban mining: reclaiming metals by recycling
- Dump digging
- Daily cover
- Landfill liner
- Landfill tax
- Phytomining: reclaiming metals by letting plants absorb them, after which they're burned
- Mycoremediation: reclaiming metals by letting fungi absorb them
- Chelation: reclaiming metals by letting bacteria absorb them
- Landfill Mining Landfill Mining, Preserving Resources through Integrated Sustainable Management of Waste, Technical Brief from the World Resource Foundation
- Landfill Mining Paper D.J. van der Zee, et al. (2004) "Assessing the market opportunities of landfill mining". Waste Manag. 24(8):795-804.
- "Landfill mining: new opportunities ahead?" (PDF). macfarlanes.com. Macfarlanes. Retrieved 2015-06-11.
- The case for pre demolition audits