|Transitive binary relations|
|✗ indicates that the property may, or may not hold. All definitions tacitly require the homogeneous relation be transitive: for all if and then and there are additional properties that a homogeneous relation may satisfy.indicates that the column's property is required by the definition of the row's term (at the very left). For example, the definition of an equivalence relation requires it to be symmetric.|
A lattice is an abstract structure studied in the mathematical subdisciplines of order theory and abstract algebra. It consists of a partially ordered set in which every pair of elements has a unique supremum (also called a least upper bound or join) and a unique infimum (also called a greatest lower bound or meet). An example is given by the power set of a set, partially ordered by inclusion, for which the supremum is the union and the infimum is the intersection. Another example is given by the natural numbers, partially ordered by divisibility, for which the supremum is the least common multiple and the infimum is the greatest common divisor.
Lattices can also be characterized as algebraic structures satisfying certain axiomatic identities. Since the two definitions are equivalent, lattice theory draws on both order theory and universal algebra. Semilattices include lattices, which in turn include Heyting and Boolean algebras. These lattice-like structures all admit order-theoretic as well as algebraic descriptions.
The sub-field of abstract algebra that studies lattices is called lattice theory.
A lattice can be defined either order-theoretically as a partially ordered set, or as an algebraic structure.
As partially ordered set
A partially ordered set (poset) is called a lattice if it is both a join- and a meet-semilattice, i.e. each two-element subset has a join (i.e. least upper bound, denoted by ) and dually a meet (i.e. greatest lower bound, denoted by ). This definition makes and binary operations. Both operations are monotone with respect to the given order: and implies that and
It follows by an induction argument that every non-empty finite subset of a lattice has a least upper bound and a greatest lower bound. With additional assumptions, further conclusions may be possible; see Completeness (order theory) for more discussion of this subject. That article also discusses how one may rephrase the above definition in terms of the existence of suitable Galois connections between related partially ordered sets—an approach of special interest for the category theoretic approach to lattices, and for formal concept analysis.
Given a subset of a lattice, meet and join restrict to partial functions – they are undefined if their value is not in the subset The resulting structure on is called a partial lattice. In addition to this extrinsic definition as a subset of some other algebraic structure (a lattice), a partial lattice can also be intrinsically defined as a set with two partial binary operations satisfying certain axioms.
As algebraic structure
A lattice is an algebraic structure , consisting of a set and two binary, commutative and associative operations and on satisfying the following axiomatic identities for all elements (sometimes called absorption laws):
The following two identities are also usually regarded as axioms, even though they follow from the two absorption laws taken together. These are called idempotent laws.
These axioms assert that both and are semilattices. The absorption laws, the only axioms above in which both meet and join appear, distinguish a lattice from an arbitrary pair of semilattice structures and assure that the two semilattices interact appropriately. In particular, each semilattice is the dual of the other. The absorption laws can be viewed as a requirement that the meet and join semilattices define the same partial order.
Connection between the two definitions
An order-theoretic lattice gives rise to the two binary operations and Since the commutative, associative and absorption laws can easily be verified for these operations, they make into a lattice in the algebraic sense.
The converse is also true. Given an algebraically defined lattice one can define a partial order on by setting
and dually for the other direction.
One can now check that the relation ≤ introduced in this way defines a partial ordering within which binary meets and joins are given through the original operations and
Since the two definitions of a lattice are equivalent, one may freely invoke aspects of either definition in any way that suits the purpose at hand.
A bounded lattice is a lattice that additionally has a greatest element (also called maximum, or top element, and denoted by 1, or by ) and a least element (also called minimum, or bottom, denoted by 0 or by ), which satisfy
A bounded lattice may also be defined as an algebraic structure of the form such that is a lattice, (the lattice's bottom) is the identity element for the join operation and (the lattice's top) is the identity element for the meet operation
A partially ordered set is a bounded lattice if and only if every finite set of elements (including the empty set) has a join and a meet. For every element of a poset it is vacuously true that and and therefore every element of a poset is both an upper bound and a lower bound of the empty set. This implies that the join of an empty set is the least element and the meet of the empty set is the greatest element This is consistent with the associativity and commutativity of meet and join: the join of a union of finite sets is equal to the join of the joins of the sets, and dually, the meet of a union of finite sets is equal to the meet of the meets of the sets, that is, for finite subsets of a poset
which is consistent with the fact that
Every lattice can be embedded into a bounded lattice by adding a greatest and a least element. Furthermore, every non-empty finite lattice is bounded, by taking the join (respectively, meet) of all elements, denoted by (respectively ) where is the set of all elements.
Connection to other algebraic structures
Lattices have some connections to the family of group-like algebraic structures. Because meet and join both commute and associate, a lattice can be viewed as consisting of two commutative semigroups having the same domain. For a bounded lattice, these semigroups are in fact commutative monoids. The absorption law is the only defining identity that is peculiar to lattice theory.
By commutativity, associativity and idempotence one can think of join and meet as operations on non-empty finite sets, rather than on pairs of elements. In a bounded lattice the join and meet of the empty set can also be defined (as and respectively). This makes bounded lattices somewhat more natural than general lattices, and many authors require all lattices to be bounded.
The algebraic interpretation of lattices plays an essential role in universal algebra.
Pic. 3: Lattice of partitions of ordered by "refines".
- For any set the collection of all subsets of (called the power set of ) can be ordered via subset inclusion to obtain a lattice bounded by itself and the empty set. In this lattice, the supremum is provided by set union and the infimum is provided by set intersection (see Pic. 1).
- For any set the collection of all finite subsets of ordered by inclusion, is also a lattice, and will be bounded if and only if is finite.
- For any set the collection of all partitions of ordered by refinement, is a lattice (see Pic. 3).
- The positive integers in their usual order form an unbounded lattice, under the operations of "min" and "max". 1 is bottom; there is no top (see Pic. 4).
- The Cartesian square of the natural numbers, ordered so that if The pair is the bottom element; there is no top (see Pic. 5).
- The natural numbers also form a lattice under the operations of taking the greatest common divisor and least common multiple, with divisibility as the order relation: if divides is bottom; is top. Pic. 2 shows a finite sublattice.
- Every complete lattice (also see below) is a (rather specific) bounded lattice. This class gives rise to a broad range of practical examples.
- The set of compact elements of an arithmetic complete lattice is a lattice with a least element, where the lattice operations are given by restricting the respective operations of the arithmetic lattice. This is the specific property that distinguishes arithmetic lattices from algebraic lattices, for which the compacts only form a join-semilattice. Both of these classes of complete lattices are studied in domain theory.
Further examples of lattices are given for each of the additional properties discussed below.
Examples of non-lattices
Most partially ordered sets are not lattices, including the following.
- A discrete poset, meaning a poset such that implies is a lattice if and only if it has at most one element. In particular the two-element discrete poset is not a lattice.
- Although the set partially ordered by divisibility is a lattice, the set so ordered is not a lattice because the pair 2, 3 lacks a join; similarly, 2, 3 lacks a meet in
- The set partially ordered by divisibility is not a lattice. Every pair of elements has an upper bound and a lower bound, but the pair 2, 3 has three upper bounds, namely 12, 18, and 36, none of which is the least of those three under divisibility (12 and 18 do not divide each other). Likewise the pair 12, 18 has three lower bounds, namely 1, 2, and 3, none of which is the greatest of those three under divisibility (2 and 3 do not divide each other).
Morphisms of lattices
Thus is a homomorphism of the two underlying semilattices. When lattices with more structure are considered, the morphisms should "respect" the extra structure, too. In particular, a bounded-lattice homomorphism (usually called just "lattice homomorphism") between two bounded lattices and should also have the following property:
In the order-theoretic formulation, these conditions just state that a homomorphism of lattices is a function preserving binary meets and joins. For bounded lattices, preservation of least and greatest elements is just preservation of join and meet of the empty set.
Any homomorphism of lattices is necessarily monotone with respect to the associated ordering relation; see Limit preserving function. The converse is not true: monotonicity by no means implies the required preservation of meets and joins (see Pic. 9), although an order-preserving bijection is a homomorphism if its inverse is also order-preserving.
Given the standard definition of isomorphisms as invertible morphisms, a lattice isomorphism is just a bijective lattice homomorphism. Similarly, a lattice endomorphism is a lattice homomorphism from a lattice to itself, and a lattice automorphism is a bijective lattice endomorphism. Lattices and their homomorphisms form a category.
Let and be two lattices with 0 and 1. A homomorphism from to is called 0,1-separating if and only if ( separates 0) and ( separates 1).
A sublattice of a lattice is a subset of that is a lattice with the same meet and join operations as That is, if is a lattice and is a subset of such that for every pair of elements both and are in then is a sublattice of 
A sublattice of a lattice is a convex sublattice of if and implies that belongs to for all elements
Properties of lattices
We now introduce a number of important properties that lead to interesting special classes of lattices. One, boundedness, has already been discussed.
A poset is called a complete lattice if all its subsets have both a join and a meet. In particular, every complete lattice is a bounded lattice. While bounded lattice homomorphisms in general preserve only finite joins and meets, complete lattice homomorphisms are required to preserve arbitrary joins and meets.
Every poset that is a complete semilattice is also a complete lattice. Related to this result is the interesting phenomenon that there are various competing notions of homomorphism for this class of posets, depending on whether they are seen as complete lattices, complete join-semilattices, complete meet-semilattices, or as join-complete or meet-complete lattices.
Note that "partial lattice" is not the opposite of "complete lattice" – rather, "partial lattice", "lattice", and "complete lattice" are increasingly restrictive definitions.
A conditionally complete lattice is a lattice in which every nonempty subset that has an upper bound has a join (that is, a least upper bound). Such lattices provide the most direct generalization of the completeness axiom of the real numbers. A conditionally complete lattice is either a complete lattice, or a complete lattice without its maximum element its minimum element or both.
Since lattices come with two binary operations, it is natural to ask whether one of them distributes over the other, that is, whether one or the other of the following dual laws holds for every three elements :
- Distributivity of over
- Distributivity of over
A lattice that satisfies the first or, equivalently (as it turns out), the second axiom, is called a distributive lattice. The only non-distributive lattices with fewer than 6 elements are called M3 and N5; they are shown in Pictures 10 and 11, respectively. A lattice is distributive if and only if it doesn't have a sublattice isomorphic to M3 or N5. Each distributive lattice is isomorphic to a lattice of sets (with union and intersection as join and meet, respectively).
For an overview of stronger notions of distributivity that are appropriate for complete lattices and that are used to define more special classes of lattices such as frames and completely distributive lattices, see distributivity in order theory.
For some applications the distributivity condition is too strong, and the following weaker property is often useful. A lattice is modular if, for all elements the following identity holds:
This condition is equivalent to the following axiom: implies (Modular law)
A lattice is modular if and only if it doesn't have a sublattice isomorphic to N5 (shown in Pic. 11). Besides distributive lattices, examples of modular lattices are the lattice of two-sided ideals of a ring, the lattice of submodules of a module, and the lattice of normal subgroups of a group. The set of first-order terms with the ordering "is more specific than" is a non-modular lattice used in automated reasoning.
A finite lattice is modular if and only if it is both upper and lower semimodular. For a graded lattice, (upper) semimodularity is equivalent to the following condition on the rank function
Another equivalent (for graded lattices) condition is Birkhoff's condition:
- for each and in if and both cover then covers both and
A lattice is called lower semimodular if its dual is semimodular. For finite lattices this means that the previous conditions hold with and exchanged, "covers" exchanged with "is covered by", and inequalities reversed.
Continuity and algebraicity
In domain theory, it is natural to seek to approximate the elements in a partial order by "much simpler" elements. This leads to the class of continuous posets, consisting of posets where every element can be obtained as the supremum of a directed set of elements that are way-below the element. If one can additionally restrict these to the compact elements of a poset for obtaining these directed sets, then the poset is even algebraic. Both concepts can be applied to lattices as follows:
- A continuous lattice is a complete lattice that is continuous as a poset.
- An algebraic lattice is a complete lattice that is algebraic as a poset.
Both of these classes have interesting properties. For example, continuous lattices can be characterized as algebraic structures (with infinitary operations) satisfying certain identities. While such a characterization is not known for algebraic lattices, they can be described "syntactically" via Scott information systems.
Complements and pseudo-complements
Let be a bounded lattice with greatest element 1 and least element 0. Two elements and of are complements of each other if and only if:
In general, some elements of a bounded lattice might not have a complement, and others might have more than one complement. For example, the set with its usual ordering is a bounded lattice, and does not have a complement. In the bounded lattice N5, the element has two complements, viz. and (see Pic. 11). A bounded lattice for which every element has a complement is called a complemented lattice.
A complemented lattice that is also distributive is a Boolean algebra. For a distributive lattice, the complement of when it exists, is unique.
In the case the complement is unique, we write ¬x = y and equivalently, ¬y = x. The corresponding unary operation over called complementation, introduces an analogue of logical negation into lattice theory.
Heyting algebras are an example of distributive lattices where some members might be lacking complements. Every element of a Heyting algebra has, on the other hand, a pseudo-complement, also denoted ¬x. The pseudo-complement is the greatest element such that If the pseudo-complement of every element of a Heyting algebra is in fact a complement, then the Heyting algebra is in fact a Boolean algebra.
Jordan–Dedekind chain condition
A chain from to is a set where The length of this chain is n, or one less than its number of elements. A chain is maximal if covers for all
If for any pair, and where all maximal chains from to have the same length, then the lattice is said to satisfy the Jordan–Dedekind chain condition.
A lattice is called graded, sometimes ranked (but see Ranked poset for an alternative meaning), if it can be equipped with a rank function sometimes to ℤ, compatible with the ordering (so whenever ) such that whenever covers then The value of the rank function for a lattice element is called its rank.
A lattice element is said to cover another element if but there does not exist a such that Here, means and
Any set may be used to generate the free semilattice The free semilattice is defined to consist of all of the finite subsets of with the semilattice operation given by ordinary set union. The free semilattice has the universal property. For the free lattice over a set Whitman gave a construction based on polynomials over 's members.
Important lattice-theoretic notions
We now define some order-theoretic notions of importance to lattice theory. In the following, let be an element of some lattice If has a bottom element is sometimes required. is called:
- Join irreducible if implies for all When the first condition is generalized to arbitrary joins is called completely join irreducible (or -irreducible). The dual notion is meet irreducibility (-irreducible). For example, in Pic. 2, the elements 2, 3, 4, and 5 are join irreducible, while 12, 15, 20, and 30 are meet irreducible. In the lattice of real numbers with the usual order, each element is join irreducible, but none is completely join irreducible.
- Join prime if implies This too can be generalized to obtain the notion completely join prime. The dual notion is meet prime. Every join-prime element is also join irreducible, and every meet-prime element is also meet irreducible. The converse holds if is distributive.
Let have a bottom element 0. An element of is an atom if and there exists no element such that Then is called:
However, many sources and mathematical communities use the term "atomic" to mean "atomistic" as defined above.
The notions of ideals and the dual notion of filters refer to particular kinds of subsets of a partially ordered set, and are therefore important for lattice theory. Details can be found in the respective entries.
- Join and meet
- Map of lattices – Concept in mathematics
- Orthocomplemented lattice
- Total order – Order whose elements are all comparable
- Ideal and filter (dual notions)
- Skew lattice (generalization to non-commutative join and meet)
- Eulerian lattice
- Post's lattice
- Tamari lattice
- Young–Fibonacci lattice
- 0,1-simple lattice
Applications that use lattice theory
Note that in many applications the sets are only partial lattices: not every pair of elements has a meet or join.
- Pointless topology
- Lattice of subgroups
- Spectral space
- Invariant subspace
- Closure operator
- Abstract interpretation
- Subsumption lattice
- Fuzzy set theory
- Algebraizations of first-order logic
- Semantics of programming languages
- Domain theory
- Ontology (computer science)
- Multiple inheritance
- Formal concept analysis and Lattice Miner (theory and tool)
- Bloom filter
- Information flow
- Ordinal optimization
- Quantum logic
- Median graph
- Knowledge space
- Regular language learning
- Analogical modeling
- Grätzer 2003, p. 52.
- Birkhoff 1948, p. 18. "since and dually". Birkhoff attributes this to Dedekind 1897, p. 8
- Burris, Stanley N., and Sankappanavar, H. P., 1981. A Course in Universal Algebra. Springer-Verlag. ISBN 3-540-90578-2.
- Baker, Kirby (2010). "Complete Lattices" (PDF). UCLA Department of Mathematics. Retrieved 8 June 2022.
- Kaplansky, Irving (1972). Set Theory and Metric Spaces (2nd ed.). New York City: AMS Chelsea Publishing. p. 14. ISBN 9780821826942.
- Davey & Priestley (2002), Exercise 4.1, p. 104.
- Davey & Priestley (2002), Theorem 4.10, p. 89.
- Davey & Priestley (2002), Theorem 10.21, pp. 238–239.
- Stanley, Richard P, Enumerative Combinatorics (vol. 1), Cambridge University Press, pp. 103–104, ISBN 0-521-66351-2
- Philip Whitman (1941). "Free Lattices I". Annals of Mathematics. 42 (1): 325–329. doi:10.2307/1969001. JSTOR 1969001.
- Philip Whitman (1942). "Free Lattices II". Annals of Mathematics. 43 (1): 104–115. doi:10.2307/1968883. JSTOR 1968883.
- Grätzer 2003, p. 246, Exercise 3.
- Grätzer 2003, p. 234, after Def.1.
Monographs available free online:
- Burris, Stanley N., and Sankappanavar, H. P., 1981. A Course in Universal Algebra. Springer-Verlag. ISBN 3-540-90578-2.
- Jipsen, Peter, and Henry Rose, Varieties of Lattices, Lecture Notes in Mathematics 1533, Springer Verlag, 1992. ISBN 0-387-56314-8.
- Nation, J. B., Notes on Lattice Theory. Chapters 1-6. Chapters 7–12; Appendices 1–3.
Elementary texts recommended for those with limited mathematical maturity:
- Donnellan, Thomas, 1968. Lattice Theory. Pergamon.
- Grätzer, George, 1971. Lattice Theory: First concepts and distributive lattices. W. H. Freeman.
The standard contemporary introductory text, somewhat harder than the above:
- Davey, B. A.; Priestley, H. A. (2002), Introduction to Lattices and Order, Cambridge University Press, ISBN 978-0-521-78451-1
- Garrett Birkhoff, 1967. Lattice Theory, 3rd ed. Vol. 25 of AMS Colloquium Publications. American Mathematical Society.
- Robert P. Dilworth and Crawley, Peter, 1973. Algebraic Theory of Lattices. Prentice-Hall. ISBN 978-0-13-022269-5.
- Grätzer, George (2003). General Lattice Theory (Second ed.). Basel: Birkhäuser. ISBN 978-3-7643-6996-5.
On free lattices:
- R. Freese, J. Jezek, and J. B. Nation, 1985. "Free Lattices". Mathematical Surveys and Monographs Vol. 42. Mathematical Association of America.
- Johnstone, P. T., 1982. Stone spaces. Cambridge Studies in Advanced Mathematics 3. Cambridge University Press.
On the history of lattice theory:
- Štĕpánka Bilová (2001). Eduard Fuchs (ed.). Lattice theory — its birth and life (PDF). Prometheus. pp. 250–257.
- Birkhoff, Garrett (1948). Lattice Theory (2nd ed.). Textbook with numerous attributions in the footnotes.
- Schlimm, Dirk (November 2011). "On the creative role of axiomatics. The discovery of lattices by Schröder, Dedekind, Birkhoff, and others". Synthese. 183 (1): 47–68. CiteSeerX 10.1.1.594.8898. doi:10.1007/s11229-009-9667-9. S2CID 11012081. Summary of the history of lattices.
- Dedekind, Richard (1897), "Über Zerlegungen von Zahlen durch ihre grössten gemeinsamen Teiler" (PDF), Braunschweiger Festschrift, doi:10.24355/dbbs.084-200908140200-2
On applications of lattice theory:
- Garrett Birkhoff (1967). James C. Abbot (ed.). What can Lattices do for you?. Van Nostrand. Table of contents
- "Lattice-ordered group", Encyclopedia of Mathematics, EMS Press, 2001 
- Weisstein, Eric W. "Lattice". MathWorld.
- J.B. Nation, Notes on Lattice Theory, unpublished course notes available as two PDF files.
- Ralph Freese, "Lattice Theory Homepage".
- OEIS sequence A006966 (Number of unlabeled lattices with n elements)