7 March 2019
|Committee||OASIS Message Queuing Telemetry Transport Technical Committee|
|Editors||Andrew Banks (IBM), Ed Briggs (Microsoft), Ken Borgendale (IBM), Rahul Gupta (IBM)|
|Internet protocol suite|
MQTT is a lightweight, publish-subscribe network protocol that transports messages between devices. The protocol usually runs over TCP/IP, however, any network protocol that provides ordered, lossless, bi-directional connections can support MQTT. It is designed for connections with remote locations where a resource constraints exist or the network bandwidth is limited. The protocol is an open OASIS standard and an ISO recommendation (ISO/IEC 20922).
Andy Stanford-Clark (IBM) and Arlen Nipper (then working for Eurotech, Inc.) authored the first version of the protocol in 1999. It was used to monitor oil pipelines within the SCADA industrial control system. The goal was to have a protocol that is bandwidth-efficient, lightweight and uses little battery power, because the devices were connected via satellite link which, at that time, was extremely expensive.
Historically, the "MQ" in "MQTT" came from the IBM MQ (then 'MQSeries') MQ product line, where it stands for "Message Queue". However, the protocol provides publish-and-subscribe messaging (no queues, in spite of the name). In the specification opened by IBM as version 3.1 the protocol was referred to as "MQ Telemetry Transport". Subsequent versions released by OASIS strictly refers to the protocol as just "MQTT", although the technical committee itself is named "OASIS Message Queuing Telemetry Transport Technical Committee". Since 2013, "MQTT" does not stand for anything.
In 2013, IBM submitted MQTT v3.1 to the OASIS specification body with a charter that ensured only minor changes to the specification could be accepted. After taking over maintenance of the standard from IBM, OASIS released version 3.1.1 on October 29, 2014. A more substantial upgrade to MQTT version 5, adding several new features, was released on March 7, 2019.
The MQTT protocol defines two types of network entities: a message broker and a number of clients. An MQTT broker is a server that receives all messages from the clients and then routes the messages to the appropriate destination clients. An MQTT client is any device (from a micro controller up to a fully-fledged server) that runs an MQTT library and connects to an MQTT broker over a network.
Information is organized in a hierarchy of topics. When a publisher has a new item of data to distribute, it sends a control message with the data to the connected broker. The broker then distributes the information to any clients that have subscribed to that topic. The publisher does not need to have any data on the number or locations of subscribers, and subscribers, in turn, do not have to be configured with any data about the publishers.
If a broker receives a message on a topic for which there are no current subscribers, the broker discards the message unless the publisher of the message designated the message as a retained message. A retained message is a normal MQTT message with the retained flag set to true. The broker stores the last retained message and the corresponding QoS for the selected topic. Each client that subscribes to a topic pattern that matches the topic of the retained message receives the retained message immediately after they subscribe. The broker stores only one retained message per topic. This allows new subscribers to a topic to receive the most current value rather than waiting for the next update from a publisher.
When a publishing client first connects to the broker, it can set up a default message to be sent to subscribers if the broker detects that the publishing client has unexpectedly disconnected from the broker.
Clients only interact with a broker, but a system may contain several broker servers that exchange data based on their current subscribers' topics.
A minimal MQTT control message can be as little as two bytes of data. A control message can carry nearly 256 megabytes of data if needed. There are fourteen defined message types used to connect and disconnect a client from a broker, to publish data, to acknowledge receipt of data, and to supervise the connection between client and server.
MQTT relies on the TCP protocol for data transmission. A variant, MQTT-SN, is used over other transports such as UDP or Bluetooth.
MQTT sends connection credentials in plain text format and does not include any measures for security or authentication. This can be provided by using TLS to encrypt and protect the transferred information against interception, modification or forgery.
The default unencrypted MQTT port is 1883. The encrypted port is 8883.
The MQTT broker is software running on a computer (running on-premises or in the cloud), and could be self-built or hosted by a third party. It is available in both open source and proprietary implementations.
The broker acts as a post office, MQTT doesn't use the address of the intended recipient but uses the subject line called “Topic”, and anyone who wants a copy of that message will subscribe to that topic. Multiple clients can receive the message from a single broker (one to many capability). Similarly, multiple publishers can publish topics to a single subscriber (many to one).
Each client can both produce and receive data by both publishing and subscribing, i.e. the devices can publish sensor data and still be able to receive the configuration information or control commands (MQTT is a bi-directional communication protocol). This helps in both sharing data, managing and controlling devices.
With MQTT broker architecture, the devices and application becomes decoupled and more secure. MQTT uses Transport Layer Security (TLS) encryption with user name, password protected connections, and optional certifications that requires clients to provide a certificate file that matches with the server’s. The clients are unaware of each other's IP address.
In case of a single source of failure, broker software and clients have an automatic handover to Redundant/automatic backup broker. The backup broker can also be set up to share the load of clients across multiple servers onsite, cloud, or the combination of both.
The broker can support both standard MQTT and MQTT for compliant specifications such as Sparkplug, can be done with same server, same time and with same levels of security.
The broker can store the data in the form of retained messages (need to subscribe with database client) so that new subscribers to the topic can get the last value straight away.
The broker also keeps track of all the session’s information as the devices goes on and off called “persistent sessions”.
The main advantages of MQTT broker are:
- Eliminates vulnerable and insecure client connections
- Can easily scale from a single device to thousands
- Manages and tracks all client connection states, including security credentials and certificates
- Reduced network strain without compromising the security (cellular or satellite network)
Waits for a connection to be established with the server and creates a link between the nodes.
Waits for the MQTT client to finish any work it must do, and for the TCP/IP session to disconnect.
Returns immediately to the application thread after passing the request to the MQTT client.
- Reason codes: Acknowledgements now support return codes, which provide a reason for a failure.
- Shared subscriptions: Allow the load to be balanced across clients and thus reduce the risk of load problems
- Message expiry: Messages can include an expiry date and are deleted if they are not delivered within this time period.
- Topic alias: The name of a topic can be replaced with a single number
Quality of service (QoS)
Each connection to the broker can specify a quality of service measure. These are classified in increasing order of overhead:
- At most once - the message is sent only once and the client and broker take no additional steps to acknowledge delivery (fire and forget).
- At least once - the message is re-tried by the sender multiple times until acknowledgement is received (acknowledged delivery).
- Exactly once - the sender and receiver engage in a two-level handshake to ensure only one copy of the message is received (assured delivery).
 This field does not affect handling of the underlying TCP data transmissions; it is only used between MQTT senders and receivers.
Several projects implement MQTT, for example:
- OpenHAB the Open-source software home automation platform embed an MQTT binding.
- The Open Geospatial Consortium SensorThings API standard specification has an MQTT extension in the standard as an additional message protocol binding. It was demonstrated in a US Department of Homeland Security IoT Pilot.
- Node-RED supports MQTT with TLS nodes as of version 0.14.
- Home Assistant the Open-source software home automation platform is MQTT enabled and offers four options for MQTT brokers.
- ejabberd supports MQTT as of version 19.02.
- Eclipse Foundation manages a Sparkplug protocol specification compatible with MQTT. It builds on top of MQTT adding requirements needed in real-time industrial applications.
- Comparison of MQTT implementations
- Advanced Message Queuing Protocol (AMQP)
- Streaming Text Oriented Messaging Protocol (STOMP)
- Constrained Application Protocol (CoAP)
- Extensible Messaging and Presence Protocol (XMPP)
- Apache ActiveMQ
- IBM MQ
- Solace PubSub+
- "MQTT Version 5.0". OASIS. 2019-03-07. Retrieved 2020-12-15.
- "OASIS Message Queuing Telemetry Transport (MQTT) Technical Committee Charter". OASIS. Retrieved 2020-12-15.
- "MQTT SN Subcommittee". OASIS. Retrieved 2020-12-15.
- "10th birthday party". MQTT.org. July 2009. Archived from the original on March 15, 2015. Retrieved April 25, 2015.
- "Transcript of IBM podcast" (PDF). IBM.com. November 2011. Retrieved January 7, 2021.
- "Getting Started with MQTT". HiveMQ. 2020-04-24.
- Team, The HiveMQ. "Introducing the MQTT Protocol - MQTT Essentials: Part 1". www.hivemq.com. Retrieved 2021-09-26.
- "MQTT v3.1 and MQTT v3.1.1 Differences". OASIS Message Queuing Telemetry Transport (MQTT) TC. 12 February 2015. Retrieved 19 August 2021.
- "MQTT V3.1 Protocol Specification". Eurotech, International Business Machines Corporation (IBM). 2010. Retrieved 2020-12-15.
- "OASIS MQTT Technical Committee Minutes of for the meeting of Thursday, 25th April 2013 Teleconference" (PDF).
- "MQTT Version 3.1.1". 2014-10-29. Retrieved 2020-12-16.
- "6 facts why it's worth upgrading to the brand new MQTT 3.1.1 version". 2014-10-30. Retrieved 2020-12-16.
- "Differences between 3.1.1 and 5.0".
- Stanford-Clark, Andy; Hong Linh Truong (November 14, 2013). "MQTT For Sensor Networks (MQTT-SN) Protocol Specification Version 1.2" (PDF). oasis-open.org. OASIS Message Queuing Telemetry Transport (MQTT) Technical Committee. p. 28. Retrieved 2020-12-15.
- "Introduction to MQTT-SN (MQTT for Sensor Networks)". Retrieved 2020-09-16.
- Yuan, Michael. "Getting to know MQTT". IBM Developer. Retrieved 13 October 2019.
- "Client, Broker / Server and Connection Establishment - MQTT Essentials: Part 3". hivemq.com. Retrieved 13 October 2019.
- "Retained Messages - MQTT Essentials: Part 8". hivemq.com. Retrieved 13 October 2019.
- "FAQ - Frequently Asked Questions | MQTT". Retrieved 2020-03-19.
- "MQTT Sparkplug/Tahu". www.cirrus-link.com. Retrieved November 5, 2019.
- "MQTT Version 5.0". OASIS Standard. Retrieved 26 July 2021.
- "What is MQTT? Definition and Details". www.paessler.com. Retrieved 2020-06-09.
- "IBM Knowledge Center - IBM MQ - Using MQTT with IBM Integration Bus - Quality of service and connection management". www.ibm.com. Retrieved 2018-01-30.
- Saxena, S.; Jain, S.; Arora, D.; Sharma, P. (13 February 2020). "Implications of MQTT Connectivity Protocol for IoT based Device Automation using Home Assistant and OpenHAB". 2019 6th International Conference on Computing for Sustainable Global Development (INDIACom): 475–480.
- "MQTT - Bindings". www.openhab.org. Retrieved 2020-11-10.
- Brothers, Reginald (January 25, 2016). "S&T's Internet of Things Pilot Demonstrates 'State of the Practical'". dhs.gov. p. 1. Retrieved March 31, 2016.
- Community staff writer (June 14, 2016). "Version 0.14 released". nodered.org/blog. Node-RED. Retrieved July 6, 2016.
MQTT with TLS support
- Home Assistant Community (August 7, 2015). "MQTT". home-assistant.io. Home Assistant Community. Retrieved August 4, 2017.
- Home Assistant Community (August 7, 2015). "MQTT Brokers". home-assistant.io. Home Assistant Community. Retrieved August 4, 2017.
The MQTT component needs you to run an MQTT broker for Home Assistant to connect to. There are four options, each with various degrees of ease of setup and privacy.
- ProcessOne, Marek Foss (2019-02-26). "ejabberd 19.02: the MQTT Edition". ProcessOne — Blog. Retrieved 2019-03-04.
- Eastburn, Josh (2020-08-24). "How to Integrate Automation Data with MQTT-Sparkplug B". Manufacturing Business Technology. Retrieved 2020-09-01.
- Guindon, Christopher (2020-01-29). "Frequently Asked Questions". Eclipse Sparkplug. Retrieved 2020-09-01.
- "APIs & Protocols". Solace. Retrieved 2021-04-08.
- "MQTT 5.0 Support 🎉". Solace Community. Retrieved 2021-04-08.
- Official website
- Official website of Technical Committee
- MQTT Specifications
- MQTT-SN Specifications
- Version 1.2, 2013-11-14: PDF edition