Miniaturization

From Wikipedia, the free encyclopedia
  (Redirected from Miniaturized)
Jump to navigation Jump to search
Battery chargers for successive generations of Apple's iPod.

Miniaturization (Br.Eng.: Miniaturisation) is the trend to manufacture ever smaller mechanical, optical and electronic products and devices. Examples include miniaturization of mobile phones, computers and vehicle engine downsizing. In electronics, Moore's law, which was named after Intel co-founder Gordon Moore,[1] predicted that the number of transistors on an integrated circuit for minimum component cost doubles every 18 months.[2][3] This enables processors to be built in smaller sizes.

History[edit]

The history of miniaturization is associated with the history of information technology based on the succession of switching devices, each smaller, faster, cheaper than its predecessor.[4] During the period referred to as the Second Industrial Revolution, miniaturization was confined to two-dimensional electronic circuits used for the manipulation of information.[5] This orientation is demonstrated in the use of vacuum tubes in the first general-purpose computers. The technology gave way to the transistor invented in the 1950s and then the integrated circuit approach developed afterward.[4]

Gordon Moore described the development of miniaturization in 1975 during the International Electron Devices meeting, where he confirmed his earlier prediction that silicon integrated circuit would dominate electronics, underscoring that during the period such circuits were already high-performance devices and starting to become cheaper. This was made possible by a reliable manufacturing process, which involved the fabrication in a batch process. It employed photolithographic, mechanical, and chemical processing steps to create multiple transistors on a single wafer of silicon.[6] The measure of this process was its yield, which is the ratio of working devices to those with defects and, given a satisfactory yield, a smaller transistor means that more can be on a single wafer, making each one cheaper to produce.[6]

Miniaturization, also known as shrinking or smallifying has many useful aspects. These words can be used in daily life or conversation by a great multitude of people.

Development[edit]

Miniaturization became a trend in the last fifty years and came to cover not just electronic but also mechanical devices.[7] Today, electronic companies are producing silicon integrated circuits or chips with switching transistors that have feature size as small as 130 nanometers (nm) and development is also underway for chips that are merely few nanometers in size through the nanotechnology initiative.[8] The focus is to make components smaller to increase the number that can be integrated into a single wafer and this required critical innovations, which include increasing wafer size, the development of sophisticated metal connections between the chip's circuits, and improvement in the polymers used for masks (photoresists) in the photolithography processes.[1] These last two are the areas where miniaturization has moved into the nanometer range.[1]

Miniaturization in electronics is advancing rapidly due to the comparative ease in miniaturizing electrons, which are its principal moving parts. The process for mechanical devices, on the other hand, is more complex due to the way the structural properties of its parts change as they shrink.[7] It is said that the so-called Third Industrial Revolution is based on economically viable technologies that can shrink three-dimensional objects.[5]

See also[edit]

References[edit]

  1. ^ a b c Guston, David (2010). Encyclopedia of Nanoscience and Society. Thousand Oaks, CA: SAGE Publications. p. 440. ISBN 9781412969871.
  2. ^ "Cramming more components onto integrated circuits" (PDF). Electronics Magazine. 1965. p. 4. Archived from the original (PDF) on February 18, 2008. Retrieved November 11, 2006.
  3. ^ "Excerpts from A Conversation with Gordon Moore: Moore's Law" (PDF). Intel Corporation. 2005. p. 1. Archived from the original (PDF) on October 29, 2012. Retrieved May 2, 2006.
  4. ^ a b Sharma, Karl (2010). Nanostructuring Operations in Nanoscale Science and Engineering. New York: McGraw-Hill Companies Inc. p. 16. ISBN 9780071626095.
  5. ^ a b Ghosh, Amitabha; Corves, Burkhard (2015). Introduction to Micromechanisms and Microactuators. Heidelberg: Springer. p. 32. ISBN 9788132221432.
  6. ^ a b Brock, David; Moore, Gordon (2006). Understanding Moore's Law: Four Decades of Innovation. Philadelphia, PA: Chemical Heritage Press. p. 26. ISBN 0941901416.
  7. ^ a b Van Riper, A. Bowdoin (2002). Science in Popular Culture: A Reference Guide. Westport, CT: Greenwood Publishing Group. p. 193. ISBN 0313318220.
  8. ^ Jha, B.B; Galgali, R.K.; Misra, Vibhuti (2004). Futuristic Materials. New Delhi: Allied Publishers. p. 55. ISBN 8177646168.

External links[edit]