|This article does not cite any sources. (December 2011) (Learn how and when to remove this template message)|
A simulation table is an automotive test system specifically designed for the high-frequency testing of vehicle components. It is sometimes also called a Multi-Axis Shaker Table or MAST.
They can simulate acceleration and displacement outputs and reproduce key data collected on proving grounds, by providing a full six degrees of freedom (6 DOF).
These test systems consist of hexapod platform with a low resonance table on top. The test system can be used to simulate any kind of vibration in all six degrees of freedom.
The movements of the test system are tightly controlled by a digital test controller.
Simulation tables can be either electrical or hydraulical. Electric simulation table usually achieve a frequency range up to 25 Hz with a maximum payload of around 500 kilograms.
For higher payloads or frequencies hydraulic simulation tables are used. Low frequency hydraulic simulation tables can easily reach 0.1 Hz to 120 Hz and test payloads up to 100tons, while specialized high frequency simulation tables can reach in excess of 100 Hz, with more than 14 g of vertical acceleration to payloads beyond 680 kg (1,500 lbs).
- P. Sollogoub, J.C Quéval, Th Chaudat, SEISMIC TESTING CAPABILITIES OF CEA SACLAY LABORATORY 
- Salles, R.; Thoma, O.; Dupuis, P.E.;Cozzani, A., New Control System of Hydra 6dof Shaker
|This article about an automotive technology is a stub. You can help Wikipedia by expanding it.|