Non-linear editing system
Non-linear editing is a form of offline editing for audio, video, and image editing. In offline editing, the original content is not modified in the course of editing. In non-linear editing, edits are specified and modified by specialized software. A pointer-based playlist, effectively an edit decision list (EDL), for video or a directed acyclic graph for still images is used to keep track of edits. Each time the edited audio, video, or image is rendered, played back, or accessed, it is reconstructed from the original source and the specified editing steps. Although this process is more computationally intensive than directly modifying the original content, changing the edits themselves can be almost instantaneous, and it prevents further generation loss as the audio, video, or image is edited.
A non-linear editing system (NLE) is a video (NLVE) or audio editing (NLAE) digital audio workstation (DAW) system that performs non-destructive editing on source material. The name is in contrast to 20th century methods of linear video editing and film editing.
A non-linear editing approach may be used when all assets are available as files on video servers or hard disks, rather than recordings on reels or tapes. While linear editing is tied to the need to sequentially view film or hear tape, non-linear editing enables direct access to any video frame in a digital video clip, without having to play or scrub/shuttle through adjacent footage to reach it, as is necessary with video tape linear editing systems.
When ingesting audio or video feeds, metadata are attached to the clip. Those metadata can be attached automatically (timecode, localization, take number, name of the clip) or manually (players names, characters, in sports: red card, goal...). It is then possible to access any frame by entering directly the timecode or the descriptive metadata. An editor can, for example at the end of the day in the Olympic Games, easily retrieve all the clips related to the players who received a gold medal.
The non-linear editing method is similar in concept to the cut and paste techniques used in IT. However, with the use of non-linear editing systems, the destructive act of cutting of film negatives is eliminated. It can also be viewed as the audio/video equivalent of word processing, which is why it is called desktop video editing in the consumer space.
Broadcast workflows and advantages
Video and audio data are first captured to hard disk-based systems, or other digital storage devices. The data are then imported into servers employing any necessary transcoding, digitizing or transfer). Once imported, the source material can be edited on a computer using application software, any of a wide range of video editing software.
Editing software records the editor's decisions in an edit decision list (EDL) that is exportable to other editing tools. Many generations and variations of the original source files can exist without storing many different copies, allowing for very flexible editing. It also makes it easy to change cuts and undo previous decisions simply by editing the EDL (without having to have the actual film data duplicated). Generation loss is also controlled, due to not having to repeatedly re-encode the data when different effects are applied.
Compared to the linear method of tape-to-tape editing, non-linear editing offers the flexibility of film editing, with random access and easy project organization. In non-linear editing, the original source files are not lost or modified during editing. This is one of the biggest advantages of non-linear editing compared to linear editing. With the EDLs, the editor can work on low-resolution copies of the video. This makes it possible to edit both standard-definition broadcast quality and high definition broadcast quality very quickly on desktop computers that may not have the power to process huge full-quality high-resolution data in real-time.
The costs of editing systems have dropped such that non-linear editing tools are now within the reach of home users. Some editing software can now be accessed free as web applications; some, like Cinelerra (focused on the professional market) and Blender, can be downloaded as free software; and some, like Microsoft's Windows Movie Maker or Apple Inc.'s iMovie, come included with the appropriate operating system.
Accessing the material
The non-linear editing retrieves video media for editing. Because these media exist on the video server or other mass storage that stores the video feeds in a given codec, the editing system can use several methods to access the material:
- Direct access
- The video server records feeds with a codec readable by the editing system, has network connection to the editor and allows direct editing. The editor previews material directly on the server (which it sees as remote storage) and edits directly on the server without transcoding or transfer.
- Shared storage
- The video server transfers feeds to and from shared storage that is accessible by all editors. Media in the appropriate codec on the server need only transferred. If recorded with a different codec, media must be transcoded during transfer. In some cases (depending on material), files on shared storage can be edited even before the transfer is finished.
- The editor downloads the material and edits it locally. This method can be used with the previous methods.
As of January 2019, Davinci Resolve had a user base of more than 2 million using the free version alone. This is a comparable user base to Apple's Final Cut Pro X, which also had 2 million users as of April 2017.. This is in comparison to 2011, when reports indicated, "Avid's Media Composer is still the most-used NLE on prime-time TV productions, being employed on up to 90 percent of evening broadcast shows". Globally, the positioning and popularity of once common video editing platforms has since changed as more NLEs exist.
Some notable NLEs are:
- Avid Media Composer
- Adobe Premiere Pro
- DaVinci Resolve
- Final Cut Pro X and its predecessor, Final Cut Pro 7.
- Sony Vegas
Early consumer applications using a multimedia computer for non-linear editing of video may have a video capture card to capture analog video or a FireWire connection to capture digital video from a DV camera, with its video editing software. Various editing tasks could then be performed on the imported video before export to another medium, or MPEG encoded for transfer to a DVD.
Modern web-based editing systems can take video directly from a camera phone over a GPRS or 3G mobile connection, and editing can take place through a web browser interface, so, strictly speaking, a computer for video editing does not require any installed hardware or software beyond a web browser and an internet connection.
This article may need to be rewritten to comply with Wikipedia's quality standards, as section. (May 2012)
When videotapes were first developed in the 1950s, the only way to edit was to physically cut the tape with a razor blade and splice segments together. While the footage excised in this process was not technically destroyed, continuity was lost and the footage was generally discarded. In 1963, with the introduction of the Ampex Editec, video tape could be edited electronically with a process known as linear video editing by selectively copying the original footage to another tape called a master. The original recordings are not destroyed or altered in this process. However since the final product is a copy of the original, there is a generation loss of quality.
First non-linear editor
The first truly non-linear editor, the CMX 600, was introduced in 1971 by CMX Systems, a joint venture between CBS and Memorex. It recorded and played back black-and-white analog video recorded in "skip-field" mode on modified disk pack drives the size of washing machines. These were commonly used to store about half an hour of data digitally on mainframe computers of the time. The 600 had a console with two monitors built in. The right monitor, which played the preview video, was used by the editor to make cuts and edit decisions using a light pen. The editor selected from options superimposed as text over the preview video. The left monitor was used to display the edited video. A DEC PDP-11 computer served as a controller for the whole system. Because the video edited on the 600 was in low-resolution black and white, the 600 was suitable only for offline editing.
Non-linear editing systems were built in the 1980s using computers coordinating multiple LaserDiscs or banks of VCRs. One example of these tape and disc-based systems was Lucasfilm's EditDroid, which used several LaserDiscs of the same raw footage to simulate random-access editing.[a] Editdroid was demonstrated at NAB in 1984. EditDroid was first system to introduce modern concepts in non-linear editing such as timeline editing and clip bins.
The LA-based post house Laser Edit[b] also had an in-house system using recordable random-access LaserDiscs.
The most popular non-linear system in the 1980s was Ediflex, which used a bank Sony JVC VCRs for offline editing. Ediflex was introduced in 1983 on the Universal series "Still the Beaver". By 1985 it was used on over 80% of filmed network programs. In 1985 Ediflex maker, Cinedco was awarded the Technical Emmy for "Design and Implementation of Non-Linear Editing for Filmed Programs."
In 1984, Montage Picture Processor was demonstrated at NAB. Montage used 17 identical copies of a set of film rushes on modified consumer Betamax VCRs. A custom circuit board was added to each deck that enabled frame-accurate switching and playback using vertical interval timecode. Intelligent positioning and sequencing of the source decks provided a simulation of random-access playback of a lengthy edited sequence without any rerecording. The theory was that with so many copies of the rushes, there could always be one machine cued up to replay the next shot in real time. Changing the EDL could be done easily, and the results seen immediately.
The first feature edited on the Montage was Sidney Lumet's Power. Notably, Francis Coppola edited The Godfather Part III on the system, and Stanley Kubrick used it for Full Metal Jacket. It was used on several episodic TV shows (Knots Landing, for one) and on hundreds of commercials and music videos.
The original Montage system won an Academy Award for Technical Achievement in 1988. Montage was reincarnated as Montage II in 1987, and Montage III appeared at NAB in 1991, using digital disk technology, which should prove to be considerably less cumbersome than the Betamax system.
All of these original systems were slow, cumbersome, and had problems with the limited computer horsepower of the time, but the mid-to-late-1980s saw a trend towards non-linear editing, moving away from film editing on Moviolas and the linear videotape method using U-matic VCRs. Computer processing advanced sufficiently by the end of the '80s to enable true digital imagery, and has progressed today to provide this capability in personal desktop computers.
An example of computing power progressing to make non-linear editing possible was demonstrated in the first all-digital non-linear editing system, the "Harry" effects compositing system manufactured by Quantel in 1985. Although it was more of a video effects system, it had some non-linear editing capabilities. Most importantly, it could record (and apply effects to) 80 seconds (due to hard disk space limitations) of broadcast-quality uncompressed digital video encoded in 8-bit CCIR 601 format on its built-in hard disk array.
The term nonlinear editing was formalized in 1991 with the publication of Michael Rubin's Nonlinear: A Guide to Digital Film and Video Editing (Triad, 1991)—which popularized this terminology over other language common at the time, including real time editing, random-access or RA editing, virtual editing, electronic film editing, and so on.
Non-linear editing with computers as it is known today was first introduced by Editing Machines Corp. in 1989 with the EMC2 editor, a PC-based non-linear off-line editing system that utilized magneto-optical disks for storage and playback of video, using half-screen-resolution video at 15 frames per second. A couple of weeks later that same year, Avid introduced the Avid/1, the first in the line of their Media Composer systems. It was based on the Apple Macintosh computer platform (Macintosh II systems were used) with special hardware and software developed and installed by Avid.
The video quality of the Avid/1 (and later Media Composer systems from the late 1980s) was somewhat low (about VHS quality), due to the use of a very early version of a Motion JPEG (M-JPEG) codec. It was sufficient, however, to provide a versatile system for offline editing, to revolutionize video and film editing. Lost in Yonkers (1993) was the first film edited with Avid Media Composer, and the first long-form documentary so edited was the HBO program Earth and the American Dream, which won a National Primetime Emmy Award for Editing in 1993. Avid quickly became the dominant NLE platform.
The NewTek Video Toaster Flyer for the Amiga included non-linear editing capabilities in addition to processing live video signals. The Flyer used hard drives to store video clips and audio, and supported complex scripted playback. The Flyer provided simultaneous dual-channel playback, which let the Toaster's Video switcher perform transitions and other effects on Video clips without additional rendering. The Flyer portion of the Video Toaster/Flyer combination was a complete computer of its own, having its own microprocessor and embedded software. Its hardware included three embedded SCSI controllers. Two of these SCSI buses were used to store video data, and the third to store audio. The Flyer used a proprietary Wavelet compression algorithm known as VTASC, which was well regarded at the time for offering better visual quality than comparable Motion JPEG based non-linear editing systems.
Until 1993, the Avid Media Composer was most often used for editing commercials or other small content/high value projects. This was primarily because the purchase cost of the system was very high, especially in comparison to the offline tape-based systems that were then in general use. Hard disk storage was also expensive enough to be a limiting factor on the quality of footage that most editors could work with and/or the amount of material that could be held digitised at any one time. In editing facilities rented by the hour or the day, a production's digitised rushes would usually be deleted at the end of the hire, so that the full amount of hard disk storage was available to the next client. Nonetheless, as all editing was being done at an offline video quality, it was possible to edit broadcast documentaries on as little as 3 gigabytes of hard drive storage. The end product of the offline non-linear editing process was a frame-accurate EDL that was output to a floppy disk and taken, together with the source tapes (aka 'the rushes'), to an online quality tape editing suite. The EDL was then read into an edit controller and used to 'auto-conform' a replica of the offline edit, playing portions of the source tapes back at full video quality and recording them to a master tape as per the exact edit points of the EDL.
Up until 1992, the Apple Macintosh computers could access only 50 gigabytes of storage at once. In 1992, this limitation was overcome by a group of industry experts led by Rick Eye a Digital Video R&D team at the Disney Channel. By February 1993, this team had integrated a long-form system that let the Avid Media Composer Apple Macintosh access over seven terabytes of digital video data. With instant access to the shot footage of an entire movie, long form non-linear editing (Motion Picture Editing) was now possible. The system made its debut at the NAB conference in 1993, in the booths of the three primary sub-system manufacturers, Avid, Silicon Graphics and Sony. Within a year, thousands of these systems, using Avid's Film Composer software (which handled the complex conversions between the offline video frame rates and the 24 fps of film), or the ever more sophisticated Media Composer, had replaced a century of 35mm film editing equipment in major motion picture studios and TV stations worldwide, making Avid the undisputed leader in "off-line" non-linear editing systems for over a decade.
Although M-JPEG became the standard codec for NLE during the early 1990s, it had drawbacks. Its high computational requirements ruled out software implementations, leading to the extra cost and complexity of hardware compression/playback cards. More importantly, the traditional tape workflow had involved editing from tape, often in a rented facility. When the editor left the edit suite, they could take their confidential video tapes with them. But the M-JPEG data rate was too high for systems like Avid on the Mac and Lightworks on PC to store the video on removable storage, so these used fixed hard disks instead. The tape paradigm of keeping your (confidential) content with you was not possible with these fixed disks. Editing machines were often rented from facilities houses on a per-hour basis, and some productions chose to delete their material after each edit session, and then recapture it the next day to guarantee security of their content. In addition, each NLE system had storage limited by its hard disk capacity.
These issues were addressed by a small UK company, Eidos Interactive. Eidos chose the new ARM-based computers from the UK and implemented an editing system, launched in Europe in 1990 at the International Broadcasting Convention. Because it implemented its own compression software designed specifically for non-linear editing, the Eidos system had no requirement for JPEG hardware and was cheap to produce. The software could decode multiple video and audio streams at once for real-time effects at no extra cost. But most significantly, for the first time, it supported unlimited cheap removable storage. The Eidos Edit 1, Edit 2, and later Optima systems let the editor use any Eidos system, rather than being tied down to a particular one, and still keep his data secure. The Optima software editing system was closely tied to Acorn hardware, so when Acorn stopped manufacturing the Risc PC in the late 1990s, Eidos discontinued the Optima system.
In the early 1990s, a small American company called Data Translation took what it knew about coding and decoding pictures for the US military and large corporate clients and spent $12 million developing a desktop editor based on its proprietary compression algorithms and off-the-shelf parts. Their aim was to 'democratize' the desktop and take some of Avid's market. In August 1993, Media 100 entered the market, providing would-be editors with a low-cost, high-quality platform.
Around the same period, two other competitors provided non-linear systems that required special hardware—typically cards added to the computer system. Fast Video Machine was a PC-based system that first came out as an offline system, and later became more online editing capable. Immix Video Cube was also a contender for media production companies. The Immix Video Cube had a control surface with faders to allow mixing and shuttle controls without the purchase of third-party controllers. Data Translation's Media 100 came with three different JPEG codecs for different types of graphics of video and many resolutions. The Media 100 system kept increasing its maximum video resolution via software upgrades rather than hardware. This was because the Media 100 cards had enough processing power support resolutions as high as Avid systems at the upper end of the Avid product line. Cards at the time had embedded dedicated CPUs (for example a Motorola 68000 processor), which were as powerful as the processors inside the Macintosh systems that hosted the application. These other companies caused tremendous downward market pressure on Avid. Avid was forced to continually offer lower-priced systems to compete with the Media 100 and other systems.
Inspired by the success of Media 100, members of the Premiere development team left Adobe to start a project called "Keygrip" for Macromedia. Difficulty raising support and money for development led the team to take their non-linear editor to the NAB conference. After various companies made offers, Keygrip was purchased by Apple as Steve Jobs wanted a product to compete with Adobe Premiere in the desktop video market. At around the same time, Avid—now with Windows versions of its editing software—was considering abandoning the Macintosh platform. Apple released Final Cut Pro in 1999, and despite not being taken seriously at first by professionals, it has evolved into a serious competitor to entry level's Avid's systems.
Another leap came in the late 1990s with the launch of DV-based video formats for consumer and professional use. With DV came IEEE 1394 (FireWire/iLink), a simple and inexpensive way of getting video into and out of computers. Users no longer had to convert video from analog to digital—it was recorded as digital to start with—and FireWire offered a straightforward way to transfer video data without additional hardware or compression. With this innovation, editing became a more realistic proposition for standard computers with software-only packages. It enabled real desktop editing producing high-quality results at a fraction of the cost of other systems.
In early 2000, the introduction of highly compressed HD formats such as HDV has continued this trend, making it possible to edit HD material on a standard computer running a software-only editing application.
Avid is still considered the industry standard, with the majority of major feature films, television programs, and commercials created with its NLE systems. Final Cut Pro received a Technology & Engineering Emmy Award in 2002 and continues to develop a following.
Avid has held on to its market-leading position in the advent of cheaper software packages, notably Adobe Premiere in 1992 and Final Cut Pro in 1999. These three competing products by Avid, Adobe, and Apple are the foremost NLEs, often referred to as the A-Team. With advances in raw computer processing power, new products have appeared including NewTek's software application SpeedEdit.
Since 2000, many personal computers include basic non-linear video editing software free of charge. This is the case of Apple iMovie for the Macintosh platform, various open source programs like Kdenlive, Cinelerra-GG Infinity and PiTiVi for the Linux platform, and Windows Movie Maker for the Windows platform. This phenomenon has brought low-cost non-linear editing to consumers.
The demands of video editing in terms of the volumes of data involved means the proximity of the footage (being edited) to that of the NLE system doing the editing is governed partly by the capacity of the data connection between the two. The increasing availability of broadband internet combined with the use of lower resolution copies of original material (video proxies) provided an opportunity to not just review and edit material remotely but also (since it is a public network) open up access to far more people to the same content at the same time. In 2004 the first cloud-based video editor, known as Blackbird and based on technology invented by Stephen Streater, was demonstrated at IBC and recognised by the RTS the following year. Since this time many other cloud-based editors have become available including systems from Avid, WeVideo and Grabyo. Despite their reliance on a network connection, the need to ingest material before editing can take place and the use of ‘video proxies’, their adoption has grown. Their popularity has been driven largely by time savings (such as the speed with which material can be shared, for example, by no longer needing to physically transport media), efficiencies arising from opportunities for greater collaboration and the potential for cost savings derived from using a shared platform, or hiring rather than buying infrastructure, as well as the use of conventional IT equipment over hardware specifically design for video editing.
As of 2014, 4K Video in NLE is fairly new, but it is being used in the creation of many movies throughout the world, due to the increased use of advanced 4K cameras such as the Red Camera. Examples of software for this task are Avid Media Composer, Apple's Final Cut Pro X, Sony Vegas, Adobe Premiere, DaVinci Resolve, Edius, and Cinelerra-GG Infinity for Linux.
For imaging software, early works such as HSC Software's Live Picture brought non-destructive editing to the professional market and current efforts such as GEGL provide an implementation being used in open source image editing software.
At one time, a primary concern with non-linear editing had been picture and sound quality. Storage limitations at the time required that all material undergo lossy compression techniques to reduce the amount of memory occupied.
Improvements in compression techniques and disk storage capacity have mitigated these concerns, and the migration to High Definition video and audio has virtually removed this concern completely. Most professional NLEs are also able to edit uncompressed video with the appropriate hardware.
- Evans, Russell (2005). Practical DV Filmmaking. Focal Press. p. 14. ISBN 0-240-80738-3.
- Waters, Cara (2019-01-27). "The Aussie tech company behind the Oscar nominees". The Sydney Morning Herald. Retrieved 2019-09-21.
- "The Seven Year Itch – FCP X, Zero to Hero?". Newsshooter. 2018-06-20. Retrieved 2019-09-21.
- "Post Technology Alliance". pta.netflixstudios.com.
- "The History of Digital Nonlinear Editing", Facer Ezine, archived from the original on 2013-04-10
- "A Brief History Of Electronic Editing" (PDF), Non Linear, archived from the original (PDF) on 2007-10-21
- Fraser Harrison (2013-03-14). "What was EditDroid?". Retrieved 2019-08-29.
- Richard Seel. "Developments in Post Production 1946 - 1991". Archived from the original on 2012-03-02.
- Buck, John (1988). Timeline, A History of Editing. Melbourne: Enriched Books. p. 448. ISBN 978-0-646-49224-7.
- "NBC LEADS EMMY WINNERS WITH 15 HONORS IN BEHIND-SCENES CATEGORIES". Associated Press. Padadena, CA. September 8, 1986. Archived from the original on September 28, 2015. Retrieved July 30, 2013.
- Harrington, Richard; Weiser, Mark; Pixel, RHED (12 February 2019). "Producing Video Podcasts: A Guide for Media Professionals". Taylor & Francis – via Google Books.
- "Nonlinear editors". Broadcast engineering. Sep 1, 2011. Archived from the original on 2018-01-04.
- "Change Country". pro.sony.