Jump to content

Parallel bars

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 213.175.160.29 (talk) at 23:34, 2 February 2016 (Removing "male" from a " '''Parallel bars''' is an apparatus used by male gymnasts in ..."). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A gymnast performs on the parallel bars

Parallel bars is an apparatus used by gymnasts in artistic gymnastics. Gymnasts may optionally wear grips when performing a routine on the parallel bars, although this is uncommon.

The apparatus

The apparatus consists of two parallel bars that are held parallel to, and elevated above, the floor by a metal supporting framework. The bars are composed of wood or other material, with an outer coating of wood.[1] The vertical members of the supporting framework are adjustable so the height of the bars above the floor and distance between the bars can be set optimally for each gymnast.[2]

Dimensions

  • Bar length: 350 centimetres (11.5 ft) ± 1 centimetre (0.39 in)[2]
  • Bar rounded profile: 5 centimetres (2.0 in) ± 1 millimetre (0.039 in) vertical by 4 centimetres (1.6 in) ± 1 millimetre (0.039 in) horizontal [2]
  • Bar width: 4 centimetres (1.6 in) ± 1 millimetre (0.039 in)[2]
  • Height of bar from floor: 200 centimetres (6.6 ft) ± 1 centimetre (0.39 in)[2]
  • Distance between bars: 42 centimetres (17 in) - 52 centimetres (20 in) (adjustable)[2]

History

The parallel bars (in German Barren) were invented by Friedrich Ludwig Jahn in Berlin.[3] In 1819 the first transportable parallel bars were described. In 1856 in Germany Hermann Otto Kluge used tubes to make the parallel bars and the horizontal bar adjustable. He used them in his gym. In Tolstoy's Anna Karenina, published between 1873-1877, their use for exercise is described.

Routines

A routine performed on the parallel bars must include various elements that depend on the gymnast's competitive level. A typical performance will involve swinging skills in a support position (on the hands), a hanging position, and an upper arm position (resting on the inner bicep). Also, parallel bar routines often feature a strength or static hold skill [clarification needed]. Each routine ends with a dismount from either the ends of the bars or the side of the apparatus.

International level routines

A parallel bar routine should contain at least one element from all element groups:[4]

  • I. Elements in support or through support
  • II. Elements starting in upper arm position
  • III. Long swings in hang, face on 1 or 2 rails
  • IV. Underswings
  • V. Dismounts

Scoring and Rules

Deductions are taken for form and exactness of elements performed. There are specific deductions for adjusting hand position in handstand and not controlling swing elements;[5] swing type elements should momentarily show handstand.[4]

References

  1. ^ "Apparatus Norms" (PDF). FIG. p. II/27. Retrieved 2009-10-20.
  2. ^ a b c d e f "Apparatus Norms" (PDF). FIG. p. II/28. Retrieved 2009-10-20.
  3. ^ History of bars
  4. ^ a b "MAG Code of Points 2009-2012" (PDF). FIG. p. 100. Retrieved 2009-10-20.
  5. ^ "MAG Code of Points 2009-2012" (PDF). FIG. p. 101. Retrieved 2009-10-20.

See also