|This article needs additional citations for verification. (February 2009)|
In computing, preemption is the act of temporarily interrupting a task being carried out by a computer system, without requiring its cooperation, and with the intention of resuming the task at a later time. Such a change is known as a context switch. It is normally carried out by a privileged task or part of the system known as a preemptive scheduler, which has the power to preempt, or interrupt, and later resume, other tasks in the system.
User mode and kernel mode
In any given system design, some operations performed by the system may not be preemptible. This usually applies to kernel functions and service interrupts which, if not permitted to run to completion, would tend to produce race conditions resulting in deadlock. Barring the scheduler from preempting tasks while they are processing kernel functions simplifies the kernel design at the expense of system responsiveness. The distinction between user mode and kernel mode, which determines privilege level within the system, may also be used to distinguish whether a task is currently preemptible.
Most modern systems have preemptive kernels, designed to permit tasks to be preempted even when in kernel mode. Examples of such systems are Solaris 2.0/SunOS 5.0, Windows NT, the Linux kernel 2.6 and 3.x, AIX and some BSD systems (NetBSD, since version 5).
The term preemptive multitasking is used to distinguish a multitasking operating system, which permits preemption of tasks, from a cooperative multitasking system wherein processes or tasks must be explicitly programmed to yield when they do not need system resources.
In simple terms: Preemptive multitasking involves the use of an interrupt mechanism which suspends the currently executing process and invokes a scheduler to determine which process should execute next. Therefore, all processes will get some amount of CPU time at any given time.
In preemptive multitasking, the operating system kernel can also initiate a context switch to satisfy the scheduling policy's priority constraint, thus preempting the active task. In general, preemption means "prior seizure of". When the high priority task at that instance seizes the currently running task, it is known as preemptive scheduling.
The term "preemptive multitasking" is sometimes mistakenly used when the intended meaning is more specific, referring instead to the class of scheduling policies known as time-shared scheduling, or time-sharing.
Preemptive multitasking allows the computer system to more reliably guarantee each process a regular "slice" of operating time. It also allows the system to rapidly deal with important external events like incoming data, which might require the immediate attention of one or another process.
At any specific time, processes can be grouped into two categories: those that are waiting for input or output (called "I/O bound"), and those that are fully utilizing the CPU ("CPU bound"). In early systems, processes would often "poll", or "busywait" while waiting for requested input (such as disk, keyboard or network input). During this time, the process was not performing useful work, but still maintained complete control of the CPU. With the advent of interrupts and preemptive multitasking, these I/O bound processes could be "blocked", or put on hold, pending the arrival of the necessary data, allowing other processes to utilize the CPU. As the arrival of the requested data would generate an interrupt, blocked processes could be guaranteed a timely return to execution.
Although multitasking techniques were originally developed to allow multiple users to share a single machine, it soon became apparent that multitasking was useful regardless of the number of users. Many operating systems, from mainframes down to single-user personal computers and no-user control systems (like those in robotic spacecraft), have recognized the usefulness of multitasking support for a variety of reasons. Multitasking makes it possible for a single user to run multiple applications at the same time, or to run "background" processes while retaining control of the computer.
The period of time for which a process is allowed to run in a preemptive multitasking system is generally called the time slice, or quantum. The scheduler is run once every time slice to choose the next process to run. The length of each time slice can be critical to balancing system performance vs process responsiveness - if the time slice is too short then the scheduler will consume too much processing time, but if the time slice is too long, processes will take longer to respond to input.
An interrupt is scheduled to allow the operating system kernel to switch between processes when their time slices expire, effectively allowing the processor’s time to be shared between a number of tasks, giving the illusion that it is dealing with these tasks simultaneously, or concurrently. The operating system which controls such a design is called a multi-tasking system.
Systems supporting preemptive multitasking
Some of the earliest operating systems available to home users featuring preemptive multitasking were Sinclair QDOS (1984) and Amiga OS (1985). These both ran on Motorola 68000-family microprocessors without memory management. Amiga OS used dynamic loading of relocatable code blocks ("hunks" in Amiga jargon) to multitask preemptively all processes in the same flat address space.
Early PC operating systems such as MS-DOS and PC DOS, did not support multitasking at all, however alternative operating systems such as MP/M-86 (1981) and Concurrent CP/M-86 did support preemptive multitasking. Other Unix-like systems including MINIX and Coherent provided preemptive multitasking on 1980s-era personal computers.
Later DOS versions natively supporting preemptive multitasking/multithreading include Concurrent DOS, Multiuser DOS, Novell DOS (later called Caldera OpenDOS and DR-DOS 7.02 and higher). Since Concurrent DOS 386, they could also run multiple DOS programs concurrently in virtual DOS machines.
The earliest version of Windows to support a limited form of preemptive multitasking was Windows 2.1x, which used the Intel 80386's Virtual 8086 mode to run DOS applications in virtual 8086 machines—commonly known as "DOS boxes"—which could be preempted. In Windows 95, 98, and Me, 32-bit applications were made preemptive by running each one in a separate address space, but 16 bit applications remained cooperative for backward compatibility. In Windows 3.1x (protected mode), the kernel and virtual device drivers ran premptively, but all 16-bit applications were non pre-emptive and shared the same address space.
Preemptive multitasking has always been supported by Windows NT (all versions), OS/2 (native applications), Unix and Unix-like systems (such as Linux, BSD and OS X), VMS, OS/360, and many other operating systems designed for use in the academic and medium-to-large business markets.
Although there were plans to upgrade the cooperative multitasking found in classic Mac OS to a preemptive model (and a preemptive API did exist in Mac OS 9, although in a limited sense), these were abandoned in favor of OS X that, as a hybrid of the old Mac System style and NeXTSTEP, is an operating system based on the Mach kernel and derived in part from BSD, which had always provided Unix-like preemptive multitasking.
- S.Khanna, M.Sebree, and J.Zolnovsky. "Realtime scheduling in SunOS 5.0". Proceedings of the USENIX Winter Conference, 1992: 375–390.
- QL History FAQ: Firmware
- How 16-Bit and 32-Bit Programs Multitask in Windows 95 (Q117567)
- "Re: newbie question: What is a Blue Task". Retrieved 2007-03-29.