5 ft 6 in gauge railway

From Wikipedia, the free encyclopedia
  (Redirected from Provincial gauge)
Jump to: navigation, search
Track gauge
By transport mode
Tram · Rapid transit
Miniature · Scale model
By size (list)
Graphic list of track gauges

Minimum
  Fifteen inch 381 mm (15 in)

Narrow
  600 mm,
Two foot
597 mm
600 mm
603 mm
610 mm
(1 ft 11 12 in)
(1 ft 11 58 in)
(1 ft 11 34 in)
(2 ft)
  750 mm,
Bosnian,
Two foot six inch,
800 mm
750 mm
760 mm
762 mm
800 mm
(2 ft 5 12 in)
(2 ft 5 1516 in)
(2 ft 6 in)
(2 ft 7 12 in)
  Swedish three foot,
900 mm,
Three foot
891 mm
900 mm
914 mm
(2 ft11 332 in)
(2 ft 11 716)
(3 ft)
  Metre 1,000 mm (3 ft 3 38 in)
  Three foot six inch 1,067 mm (3 ft 6 in)
  Four foot six inch 1,372 mm (4 ft 6 in)

  Standard 1,435 mm (4 ft 8 12 in)

Broad
  1520 mm,
Five foot
1,520 mm
1,524 mm
(4 ft 11 2732 in)
(5 ft)
  Five foot three inch 1,600 mm (5 ft 3 in)
  Iberian 1,668 mm (5 ft 5 2132 in)
  Five foot six inch 1,676 mm (5 ft 6 in)
  Six foot 1,829 mm (6 ft)
  Brunel 2,140 mm (7 ft 14 in)
Change of gauge
Break-of-gauge · Dual gauge ·
Conversion (list· Bogie exchange · Variable gauge
By location
North America · South America · Europe · Australia
World map, rail gauge by region

5 ft 6 in/​1,676 mm is the size of a broad track gauge commonly used in India, Pakistan, Bangladesh, Sri Lanka, Argentina, Chile, and on the BART (Bay Area Rapid Transit), in the San Francisco Bay Area. In South Asia it is simply known as "Broad gauge," while in North America, it is called Provincial, Portland, or Texas gauge or as Indian gauge elsewhere. It is the widest gauge in regular use anywhere in the world.

Europe[edit]

United Kingdom[edit]

See 5 ft 6 in gauge in Scotland

This gauge was first used in Scotland for two short, isolated lines, the Dundee and Arbroath Railway (1836-1847) and the Arbroath and Forfar Railway (1838- ). Both the lines were subsequently converted to standard gauge.

North America[edit]

Canada[edit]

In the 1850s it was first used in Canada, and was then used in other British colonies. It was known as the "Provincial gauge" in Canada. The earliest railways in Canada, including the 1836 Champlain and St. Lawrence, 1839 Albion Colliery tramway and 1847 Montreal and Lachine Railway however, were built to standard gauge.[1]

The Grand Trunk Railway which operated in several Canadian provinces (Quebec and Ontario) and American states (Connecticut, Maine, Massachusetts, New Hampshire, and Vermont) used it, but was changed to standard gauge in 1873. The Grand Trunk Railway which operated from headquarters in Montreal, Quebec, although corporate headquarters were in London, England. The St. Lawrence and Atlantic Railroad which operated in Quebec, Vermont, New Hampshire and Maine also used it but was converted in 1873.

There is a longstanding rumour that the Provincial gauge was selected specifically to create a break-of-gauge with US railways, the War of 1812 still being a fresh memory. However, there is little supporting evidence for this, and this story appears to be traced to a single claim from the late 1800s.[1]

United States[edit]

The Bay Area Rapid Transit system is the only operating railroad in the United States to use Indian gauge, with 104 miles (167 km) of mainlines. The original engineers for the system had background in aerospace (rather than railroads) and intended to make a state-of-the-art system for other municipalities to emulate. The use of Indian gauge rails was one of many unconventional design elements included in its design which, in addition to its unusual gauge, also uses flat-edge rail, rather than typical rail that angles slightly inward. This has complicated maintenance of the system, as it requires custom wheelsets, brake systems, and track maintenance vehicles.[2]

The New Orleans, Opelousas and Great Western Railroad (NOO&GW) used Indian gauge until 1872, and the Texas and New Orleans Railroad used Indian gauge ("Texas gauge") until 1876. The Grand Trunk Railway predecessor St. Lawrence and Atlantic Railroad which operated in Quebec, Vermont, New Hampshire and Maine also used Indian gauge ("Canadian gauge" or "Portland gauge") but was converted in 1873. Several Maine railroads connected to the Grand Trunk Railway shared its "Portland Gauge". The Androscoggin and Kennebec Railroad and the Buckfield Branch Railroad were later consolidated as the Maine Central Railroad which converted to standard gauge in 1871. The only electric streetcar system in the U.S. to use this gauge was that of Fairfield, Maine.

John A. Poor's chief engineer Alvin C. Morton compiled the following advantages of "Portland Gauge" for Maine railways in 1847:[3]

  • Frost heaves (swelling of wet soil upon freezing) produce an uneven running surface causing an irregular rocking motion as trains moved past. A wider wheelbase offered a steadier ride with less wear on the machinery and roadbed.
  • Wider cars offered more room for passengers and cargo. Train length would be reduced for cars carrying the same amount of cargo. Shorter trains would lessen the effects of side winds, and permit more efficient application of power.
  • Wide gauge locomotives offered more room to place reciprocating machinery inside, rather than outside the driving wheels. Reciprocating machinery was a source of vibration before mechanical engineering encompassed a good understanding of dynamics; and keeping such vibration close to the center of mass reduced the angular momentum causing rocking.
  • Wider fireboxes and boilers allowed more powerful locomotives. The alternative of longer boilers held the disadvantage of poor firebox draft through the increased frictional resistance of longer boiler tubes.
  • More powerful locomotives carrying fewer, larger cars would have reduced manpower requirement for engine crews and shop personnel.
  • For locomotives of equal power, fuel consumption increased as gauge decreased, especially in colder outside temperatures.
  • More powerful wide gauge locomotives would be more capable for plowing snow; and thereby provide more reliable winter service.
  • Several gauges were in widespread use, and none had yet come into clear dominance.
  • Freight transfer was preferable to exchange of cars between railways because unowned cars were abused on foreign railways.
  • The Grand Trunk Railway system feeding the seaport of Portland, Maine offered little need for gauge transfer prior to loading on export shipping.
  • Potential advantages of freight transfer to the standard gauge railroad from Portland to Boston seemed insignificant as long as competitive rates were available for transport on steamships between the two ports.
  • The majority of Canadian freight anticipated to be carried over rail lines to Portland was heavy and bulky in comparison to its value, and must be transported cheaply in large quantities to maintain profitability for producers and transporters.

South America[edit]

Argentina[edit]

Chile[edit]

Asia[edit]

India[edit]

In India, the Governor-General Lord Dalhousie proposed 1,676 mm (5 ft 6 in) broad gauge for India. The first train that ran from Bombay to Thane ran on 1,676 mm (5 ft 6 in) broad gauge. Rail transport in India today is completely on 1,676 mm (5 ft 6 in) broad gauge barring urban rail and heritage railways.

Pakistan[edit]

In Pakistan all services currently operate on 1,676 mm (5 ft 6 in) broad gauge only.

Bangladesh[edit]

Bangladesh Railways uses a mix of 1,676 mm (5 ft 6 in) broad gauge and metre gauge. The broad gauge network is primarily located to the west of the Jamuna River, while the metre gauge network is primarily located to its east. The Jamuna Bridge is a mixed use bridge that contains a dual gauge connection across the river linking both networks.

Sri Lanka[edit]

In Sri Lanka all services currently operate on 1,676 mm (5 ft 6 in) broad gauge only.

Nepal[edit]

In Nepal all services currently operate on 1,676 mm (5 ft 6 in) broad gauge only.

Similar gauges[edit]

Iberian gauge (1,668 mm or 5 ft 5 2132 in) is closely similar, with only 8 mm (516 in) difference, and allows compatibility with the rolling stock. For example, in recent years Chile and Argentina have bought second hand Spanish/Portuguese Iberian-gauge rolling stock.

Installations[edit]

Country/territory Railway
Argentina
Bangladesh
Canada
Chile
India
Nepal
Pakistan
Paraguay The Paraguayan railway from Asunción to Encarnación was originally laid in this gauge, in the hope that the connecting line from Posadas to Buenos Aires would be built to the same gauge; alas, this line was laid to standard gauge, and when the FCPCAL reached Encarnación in 1912 the whole line had to be re-gauged to standard gauge to allow through-working.
Sri Lanka
United Kingdom Two early (1830s) linked railways around Arbroath (see Scotch gauge). (converted to standard gauge)
United States

See also[edit]

References[edit]

  1. ^ a b Omer Lavallee, "The Rise and Fall of the Provincial Gauge", Canadian Rail, February 1963, pp. 22-37
  2. ^ Gafni, Matthias (March 25, 2016). "Has BART's cutting-edge 1972 technology design come back to haunt it?". San Jose Mercury News. Retrieved March 28, 2016. 
  3. ^ Holt, Jeff (1985). The Grand Trunk in New England. Railfare. p. 78. ISBN 0-919130-43-7. 
  4. ^ "Canada's Digital Collections archived at Library and Archives Canada". Government of Canada. Retrieved 2007-11-29.