Pușcă Automată model 1986
||This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (January 2013)|
|Pușcă Automată model 1986|
The Pmd. 86 with AG-40 grenade launcher.
|Place of origin||Romania|
|Used by||Romania, Socialist Republic of Romania|
|Wars||Peace-keeping missions in Bosnia, Kosovo, Iraq, Afghanistan.|
|Manufacturer||ROMARM via Regia Autonomă pentru producţia de Tehnică Militară (RATMIL), Cugir|
|Weight||3.69 kg (8.14 lb)|
|Length||943 mm (37.1 in) stock extended / 748 mm (29.4 in) stock folded|
|Barrel length||432 mm (17.0 in)|
|Action||Gas-actuated, rotating bolt|
|Rate of fire||700 rounds/min|
|Muzzle velocity||880 m/s (2,887 ft/s)|
|Effective firing range||100 to 1,000 m sight adjustments|
|Feed system||30-round detachable box magazine|
|Sights||Rear sight notch sight on sliding tangent, front post|
The Pușcă Automată model 1986 (Automatic Rifle Model 1986, abbreviated PA md. 86 or simply md. 86) is the standard assault rifle used by the Romanian Military Forces and manufactured in Cugir, Romania by firm RomArm S.A. located in Bucharest, Romania. The export name for this variant is the AIMS-74.
By the mid 80s, Romania decided to switch calibers, however it was decided that the new rifle be developed independently, and not represent a clone of the Soviet AK-74. In doing so, the PA md. 86 has several anachronistic AKM elements that were found only on the prototype Soviet AK-74.
The most easily recognized AKM feature is the gas block design (45 degree versus 90 degree). Incidentally, although the gas block is purely AKM, the gas vent in the barrel did change to a 90 degree design to minimize bullet shearing (a problem with early Soviet AK-74's with 45 degree gas blocks). This means the Romanian PA md. 86 has a double angle gas port, which makes it much harder to clean the gas vent. This variant also uses the AK-47 rear trunnion, and thus the siderail is lengthened.
It uses either the bird-cage flash suppressor, or a flash hider (designed for Special Forces). The design also incorporated an upward curved charging handle, a wire sidefolder, based on the East German design, but offset slightly to the left, and the traditional vertical handgrip. The md. 86 use laminated wood lower handguards, and Bakelite pistol grips and upper handguards. None of the components have had any polymer versions.
The AG-40 grenade launcher can be attached as a lower handguard after removing the standard one. Lasers/lights can also be clamped to the barrel in two ways. The rifle is one of only a few AK versions that have a 3-round burst option. The selector markings are as follows, from top to bottom: ∞, 1, 3. Only ribbed steel magazines are used.
Combat divers also use a version with straight handguards, as the grip is considered to be cumbersome for amphibious operations.
This rifle also has a rarely seen short barrel version, PA md. 86 cu țeavă scurtă (short barreled PA md. 86), where the front sight is placed on the gas block, with the gas tube being shortened. This version uses both straight and laminate grip handguards.
The 5.45mm civilian export versions are: Romak 992, Romak 2, Intrac Mk II, CUR-2, WUM-2, SAR 2, and the WASR 2 which is the current production rifle. The WASR 2 doesn't have a dimpled receiver, as opposed to previous models.
The RPK version of the md. 86 is called the md. 93. It features a long reinforced receiver, a carry handle, and a bipod. An earlier, short-lived version used a fire control group similar to the 7.62mm md. 64, "Safe - Auto - Single". The md. 93 changed this to the md. 86 style "Safe - Auto - Single - Burst".
|Wikimedia Commons has media related to PA md. 86 of the Romanian Armed Forces.|
- Tantal's Avtomats in Action.
- MApN (Ministry of National Defence) Photo Gallery
- SC Fabrica de Arme Cugir SA - Arms Factory - md. 86 Assault Rifle[dead link]
- SC Fabrica de Arme Cugir SA - Arms Factory - md. 86 Carbine[dead link]