Quill drive

From Wikipedia, the free encyclopedia
  (Redirected from Quill shaft)
Jump to navigation Jump to search
The running gear of a quill drive-equipped EP-3 electric locomotive

A quill drive is a mechanism that allows a drive shaft to shift its position (either axially, radially, or both) relative to its driving shaft. It consists of a hollow driving shaft (the quill) with a driven shaft inside it. The two are connected in some fashion which permits the required motion.

Examples[edit]

Drill press[edit]

One example of a quill drive is found in a drill press where the quill allows the chuck to move vertically while being driven rotationally.

Railroad locomotive[edit]

Quill drives have been extensively used in railroad electric locomotives to connect between frame-mounted traction motors and the driven wheels. The two are linked by a flexible drive which allows a degree of radial motion and possibly a small amount of axial motion. This allows the motors to be mounted on top of the suspension system, moving independently of the wheels. This smooths the drive from the motors and isolates them from mechanical shock. This also decreases the unsprung weight borne directly by the wheels, thus decreasing wear on the track.

Quill drives were used by many electric locomotives in the United States, particularly those of the Pennsylvania Railroad—their long-lasting GG1 design being perhaps the best known. Many locomotives built in France, Germany, and Italy used quill drives as well, allowing higher locomotive speed. The English Electric built NZR ED class used a quill drive, but was found to be hard on the track.

See also[edit]

References[edit]

  • "Electric traction: axles drives: Quill drive". IEC 60050 - International Electrotechnical Vocabulary. std.iec.ch. Retrieved July 6, 2008.