In physics, angular frequency ω (also referred to by the terms angular speed, radial frequency, circular frequency, orbital frequency, radian frequency, and pulsatance) is a scalar measure of rotation rate. It refers to the angular displacement per unit time (e.g., in rotation) or the rate of change of the phase of a sinusoidal waveform (e.g., in oscillations and waves), or as the rate of change of the argument of the sine function.
Angular frequency (or angular speed) is the magnitude of the vector quantity angular velocity. The term angular frequency vector is sometimes used as a synonym for the vector quantity angular velocity.
- ω is the angular frequency or angular speed (measured in radians per second),
- T is the period (measured in seconds),
- f is the ordinary frequency (measured in hertz) (sometimes symbolised with ν).
In SI units, angular frequency is normally presented in radians per second, even when it does not express a rotational value. From the perspective of dimensional analysis, the unit hertz (Hz) is also correct, but in practice it is only used for ordinary frequency f, and almost never for ω. This convention helps avoid confusion.
In a rotating or orbiting object, there is a relation between distance from the axis, tangential speed, and the angular frequency of the rotation:
Oscillations of a spring
- k is the spring constant,
- m is the mass of the object.
ω is referred to as the natural frequency (which can sometimes be denoted as ω0).
As the object oscillates, its acceleration can be calculated by
where x is displacement from an equilibrium position.
Using "ordinary" revolutions-per-second frequency, this equation would be
The resonant angular frequency in a series LC circuit equals the square root of the inverse of the product of the capacitance (C measured in farads) and the inductance of the circuit (L in henries):
Adding series resistance (for example, due to the resistance of the wire in a coil) does not change the resonate frequency of the series LC circuit. For a parallel tuned circuit, the above equation is often a useful approximation, but the resonate frequency does depend on the losses of parallel elements.
References and notes
- Cummings, Karen; Halliday, David (Second Reprint: 2007). Understanding physics. New Delhi: John Wiley & Sons Inc., authorized reprint to Wiley - India. pp. 449, 484, 485, 487. ISBN 978-81-265-0882-2. Check date values in:
- Holzner, Steven (2006). Physics for Dummies. Hoboken, New Jersey: Wiley Publishing Inc. p. 201. ISBN 978-0-7645-5433-9.
- Lerner, Lawrence S. (1996-01-01). Physics for scientists and engineers. p. 145. ISBN 978-0-86720-479-7.
- Serway, Raymond A.; Jewett, John W. (2006). Principles of physics (4th ed.). Belmont, CA: Brooks / Cole - Thomson Learning. pp. 375, 376, 385, 397. ISBN 978-0-534-46479-0.
- Nahvi, Mahmood; Edminister, Joseph (2003). Schaum's outline of theory and problems of electric circuits. McGraw-Hill Companies (McGraw-Hill Professional). pp. 214, 216. ISBN 0-07-139307-2.(LC1)
- Olenick ,, Richard P.; Apostol, Tom M.; Goodstein, David L. (2007). The Mechanical Universe. New York City: Cambridge University Press. pp. 383–385, 391–395. ISBN 978-0-521-71592-8.