|This article does not cite any sources. (December 2009) (Learn how and when to remove this template message)|
Radioluminescence is the phenomenon by which light is produced in a material by bombardment with ionizing radiation such as alpha particles, beta particles, or gamma rays. Radioluminescence is used as a low level light source for night illumination of instruments or signage or other applications where light must be produced for long periods without external energy sources. Radioluminescent paint used to be used for clock hands and instrument dials, enabling them to be read in the dark. Radioluminescence is also sometimes seen around high-power radiation sources, such as nuclear reactors and radioisotopes.
Radioluminescence occurs when an incoming radiation particle collides with an atom or molecule, exciting an orbital electron to a higher energy level. The particle usually comes from the radioactive decay of an atom of a radioisotope, an isotope of an element which is radioactive. The electron then returns to its ground energy level by emitting the extra energy as a photon of light. The emitted photon is often in the ultraviolet energy range or higher and so invisible to the human eye. Therefore, in radioluminescent light sources, the radioactive substance is mixed with a phosphor, a chemical that releases light of a particular color when struck by the particle.
Since radioactivity was discovered around the turn of the 20th century, the main application of radioluminescence has been in radioluminescent paint, used on watch and compass dials, gunsights, aircraft flight instrument faces, and other instruments, to allow them to be seen in the dark. Radioluminescent paint consists of a mixture of a chemical containing a radioisotope with a radioluminescent chemical (phosphor). The continuous radioactive decay of the isotope's atoms releases radiation particles which strike the molecules of the phosphor, causing them to give off light. The constant bombardment by radioactive particles causes the chemical breakdown of many types of phosphor, so radioluminescent paints lose some of their luminosity over their working life.
The latest generation of radioluminescent materials is based on tritium, a radioactive isotope of hydrogen with half-life of 12.32 years that emits very low-energy beta radiation. It is used on wristwatch faces, gun sights, and emergency exit signs. The tritium gas is contained in a small glass tube, coated with a phosphor on the inside. Beta particles emitted by the tritium strike the phosphor coating and cause it to fluoresce, emitting light, usually yellow-green.
Tritium is used because it is believed to pose a negligible threat to human health, in contrast to the previous radioluminescent source, radium (below), which proved to be a significant radiological hazard. The low-energy 5.7 keV beta particles emitted by tritium cannot pass through the enclosing glass tube. Even if they could, they are not able to penetrate human skin. Tritium is only a health threat if ingested. Since tritium is a gas, if a tritium tube breaks, the gas dissipates in the air and is diluted to safe concentrations.
Tritium has a half-life of 12.3 years, so the brightness of a tritium light source will decline to half its initial value in that time.
In the second half of the 20th century, radium was progressively replaced with paint containing promethium-147. Promethium is a low-energy beta-emitter, which, unlike alpha emitters like radium does not degrade the phosphor lattice, so the luminosity of the material does not degrade so fast. It also does not emit the penetrating gamma rays which radium does. The half-life of 147Pm is only 2.62 years, so in a decade the radioactivity of a promethium dial will decline to only 1/16 of its original value, making it safer to dispose of, compared to radium with its half life of 1600 years. However this short half-life meant that the luminosity of promethium dials also dropped by half every 2.62 years, giving them a short useful life, which led to promethium's replacement by tritium (above).
Beginning in 1908, luminous paint containing a mixture of radium and copper-doped zinc sulfide was used to paint watch faces and instrument dials, giving a greenish glow. Phosphors containing copper-doped zinc sulfide (ZnS:Cu) yield blue-green light; copper and manganese-doped zinc sulfide (ZnS:Cu,Mn), yielding yellow-orange light, are also used. Radium-based luminescent paint is no longer used due to the radiation hazard posed to those manufacturing the dials. These phosphors are not suitable for use in layers thicker than 25 mg/cm2, as the self-absorption of the light then becomes a problem. Furthermore, zinc sulfide undergoes degradation of its crystal lattice structure, leading to gradual loss of brightness significantly faster than the depletion of radium.
Radium was used in luminous paint until the 1960s, when it was replaced with the other radioisotopes above due to health concerns. In addition to alpha and beta rays, radium emits penetrating gamma rays, which can pass through the metal and glass of a watch dial, and skin. A typical older radium wristwatch dial has a radioactivity of 3-10 kBq and could expose its wearer to an annual dose of 24 millisieverts if worn continuously. Another health hazard is its decay product, the radioactive gas radon, which constitutes a significant risk even at extremely low concentrations when breathed. Radium's long half-life of 1600 years means that surfaces coated with radium paint, such as watch faces and hands, remain a health hazard long after their useful life is over. There are still millions of luminous radium clock, watch, and compass faces and aircraft instrument dials owned by the public. The case of the "Radium Girls", workers in watch factories in the early 1920s who painted watch faces with radium paint and later contracted fatal cancer through ingesting radium when they pointed their brushes with their lips, increased public awareness of the hazards of radioluminescent materials, and radioactivity in general.
- Cherenkov radiation
- Gas mantle
- List of light sources
- Radium Dial Company
- United States Radium Corporation
- Radioluminescence in phosphor
- "Apollo Experience Report - Protection Against Radiation" (PDF). NASA. Retrieved 9 December 2011.
- Tykva, Richard; Sabol, Jozef (1995). Low-Level Environmental Radioactivity: Sources and Evaluation. CRC Press. pp. 88–89. ISBN 1566761891.