# Riemannian connection on a surface

For the classical approach to the geometry of surfaces, see Differential geometry of surfaces.

In mathematics, the Riemannian connection on a surface or Riemannian 2-manifold refers to several intrinsic geometric structures discovered by Tullio Levi-Civita, Élie Cartan and Hermann Weyl in the early part of the twentieth century: parallel transport, covariant derivative and connection form . These concepts were put in their final form using the language of principal bundles only in the 1950s. The classical nineteenth century approach to the differential geometry of surfaces, due in large part to Carl Friedrich Gauss, has been reworked in this modern framework, which provides the natural setting for the classical theory of the moving frame as well as the Riemannian geometry of higher-dimensional Riemannian manifolds. This account is intended as an introduction to the theory of connections.

## Historical overview

Tullio Levi-Civita (1873–1941)
Élie Cartan (1869–1951)
Hermann Weyl (1885–1955)

After the classical work of Gauss on the differential geometry of surfaces[1][2][3][4] and the subsequent emergence of the concept of Riemannian manifold initiated by Bernhard Riemann in the mid-nineteenth century, the geometric notion of connection developed by Tullio Levi-Civita, Élie Cartan and Hermann Weyl in the early twentieth century represented a major advance in differential geometry. The introduction of parallel transport, covariant derivatives and connection forms gave a more conceptual and uniform way of understanding curvature, which not only allowed generalisations to higher-dimensional manifolds but also provided an important tool for defining new geometric invariants, called characteristic classes.[5] The approach using covariant derivatives and connections is nowadays the one adopted in more advanced textbooks.[6][7][8]

Although Gauss was the first to study the differential geometry of surfaces in E3, it was not until Riemann's Habilitationsschrift of 1854 that the notion of a Riemannian space was introduced. Christoffel introduced his eponymous symbols in 1869. Tensor calculus was developed by Ricci, who published a systematic treatment with Levi-Civita in 1901. Covariant differentiation of tensors was given a geometric interpretation by Levi-Civita (1917) who introduced the notion of parallel transport on surfaces. His discovery prompted Weyl and Cartan to introduce various notions of connection, including in particular that of affine connection. Cartan's approach was rephrased in the modern language of principal bundles by Ehresmann, after which the subject rapidly took its current form following contributions by Chern, Ambrose and Singer, Kobayashi, Nomizu, Lichnerowicz and others.[9]

Connections on a surface can be defined in a variety of ways. The Riemannian connection or Levi-Civita connection[10] is perhaps most easily understood in terms of lifting vector fields, considered as first order differential operators acting on functions on the manifold, to differential operators on the frame bundle: in the case of an embedded surface, the lift is very simply described in terms of orthogonal projection. Indeed the vector bundles associated with the frame bundle are all sub-bundles of trivial bundles that extend to the ambient Euclidean space; a first order differential operator can always be applied to a section of a trivial bundle, in particular to a section of the original sub-bundle, although the resulting section might no longer be a section of the sub-bundle. This can be corrected by projecting orthogonally.

The Riemannian connection can also be characterized abstractly independently of an embedding. The equations of geodesics are easy to write in terms of the Riemannian connection, which can be locally expressed in terms of the Christoffel symbols. Along a curve in the surface, the connection defines a first order differential equation in the frame bundle. The monodromy of this equation defines parallel transport for the connection, a notion introduced in this context by Levi-Civita.[10] This gives an equivalent more geometric way of describing the connection in terms of lifting paths in the manifold to paths in the frame bundle. This formalised the classical theory of the "moving frame", favoured by French authors.[11] Lifts of loops about a point give rise to the holonomy group at that point. The Gaussian curvature at a point can be recovered from parallel transport around increasingly small loops at the point. Equivalently curvature can be calculated directly infinitesimally in terms of Lie brackets of lifted vector fields.

The approach of Cartan, using connection 1-forms on the frame bundle of M, gives a third way to understand the Riemannian connection, which is particularly easy to describe for an embedded surface. Thanks to a result of Kobayashi (1956), later generalized by Narasimhan & Ramanan (1961), the Riemannian connection on a surface embedded in Euclidean space E3 is just the pullback under the Gauss map of the Riemannian connection on S2.[12] Using the identification of S2 with the homogeneous space SO(3)/SO(2), the connection 1-form is just a component of the Maurer-Cartan 1-form on SO(3). In other words everything reduces to understanding the 2-sphere properly.[13]

## Covariant derivative

Main article: covariant derivative
A vector field on the torus

For a surface M embedded in E3 (or more generally a higher-dimensional Euclidean space), there are several equivalent definitions of a vector field X on M:

The last condition means that the assignment fXf on C(M) satisfies the Leibniz rule

$X(fg)= (Xf)g + f(Xg).$

The space of all vector fields $\mathcal{X}$(M) forms a module over C(M), closed under the Lie bracket

$[X,Y]f= X(Yf) - Y(Xf)$

with a C(M)-valued inner product (X,Y), which encodes the Riemannian metric on M.

Since $\mathcal{X}$(M) is a submodule of C(M, E3)=C(M)$\otimes$ E3, the operator X$\otimes$ I is defined on $\mathcal{X}$(M), taking values in C(M, E3).

Let P be the smooth map from M into M3(R) such that P(p) is the orthogonal projection of E3 onto the tangent space at p.

Pointwise multiplication by P gives a C(M)-module map of C(M, E3) onto $\mathcal{X}$(M) . The assignment

 $\nabla_X Y = P((X\otimes I)Y)$

defines an operator $\nabla_X$ on $\mathcal{X}$(M) called the covariant derivative, satisfying the following properties

1. $\nabla_X$ is C(M)-linear in X
2. $\nabla_X(fY) = (Xf) Y + f \nabla_X Y$ (Leibniz rule for derivation of a module)
3. $X(Y,Z)=(\nabla_X Y,Z) + (Y,\nabla_X Z)$ (compatibility with the metric)
4. $\nabla_X Y - \nabla_Y X = [X,Y]$ (symmetry property).

The first three properties state that $\nabla$ is an affine connection compatible with the metric, sometimes also called a hermitian or metric connection. The last symmetry property says that the torsion tensor

$T(X,Y)= \nabla_X Y - \nabla_Y X - [X,Y]$

vanishes identically, so that the affine connection is torsion-free.

The assignment $\nabla$ is uniquely determined by these four conditions and is called the

Riemannian connection or Levi-Civita connection.

Although the Riemannian connection was defined using an embedding in Euclidean space, this uniqueness property means that it is in fact an intrinsic invariant of the surface.

It existence can be proved directly for a general surface by noting that the four properties imply

$2(\nabla_X Y,Z)= X\cdot(Y,Z)+Y\cdot(X,Z) - Z\cdot(X,Y) +([X,Y],Z) +([Z,X],Y) + (X,[Z,Y]),$

so that $\nabla_X Y$ depends only on the metric and is unique. On the other hand if this is used as a definition of $\nabla_X Y$, it is readily checked that the four properties above are satisfied.[14]

Equivalently, in local coordinates (x,y) with basis tangent vectors e1=$\partial_x$ and e2 = $\partial_y$, the connection $\nabla$ can be expressed purely in terms of the metric using the Christoffel symbols:

$\nabla_{{\mathbf e}_i} {\mathbf e}_j = \sum_k \Gamma^k_{ij} {\mathbf e}_k.$

If c(t) is a path in M, then the Euler equations for c to be a geodesic can be written more compactly as

$\nabla_{\dot{c}} \dot{c} = 0.$

## Parallel transport

Parallel transport of a vector around a geodesic triangle on the sphere. The length of the transported vector and the angle it makes with each side remain constant.

Given a curve in the Euclidean plane and a vector at the starting point, the vector can be transported along the curve by requiring the moving vector to remain parallel to the original one and of the same length, i.e. it should remain constant along the curve. If the curve is closed, the vector will be unchanged when the starting point is reached again. This is well known not to be possible on a general surface, the sphere being the most familiar case. In fact it is not usually possible to identify simultaneously or "parallelize" all the tangent planes of such a surface: the only parallelizable closed surfaces are those homeomorphic to a torus.[15]

Parallel transport can always be defined along curves on a surface using only the metric on the surface. Thus tangent planes along a curve can be identified using the intrinsic geometry, even when the surface itself is not parallelizable.

Parallel transport along geodesics, the "straight lines" of the surface, is easy to define. A vector in the tangent plane is transported along a geodesic as the unique vector field with constant length and making a constant angle with the velocity vector of the geodesic.

For a general curve, its geodesic curvature measures how far the curve departs from being a geodesics; it is defined as the rate at which the curve's velocity vector rotates in the surface. In turn the geodesic curvature determines how vectors in the tangent planes along the curve should rotate during parallel transport.

A vector field v(t) along a unit speed curve c(t), with geodesic curvature kg(t), is said to be parallel along the curve if

• it has constant length
• the angle θ(t) that it makes with the velocity vector $\dot{c}(t)$ satisfies
 $\dot{\theta}(t) = - k_g(t)$

This yields the previous rule for parallel transport along a geodesic, because in that case kg = 0, so the angle θ(t) should remain constant.[16] The existence of parallel transport follows from standard existence theorems for ordinary differential equations. The above differential equation can be rewritten in terms of the covariant derivative as

 $\nabla_{\dot{c}} v = 0$

This equation shows once more that parallel transport depends only on the metric structure so is an intrinsic invariant of the surface. Parallel transport can be extended immediately to piecewise C1 curves.

When M is a surface embedded in E3, this last condition can be written in terms of the projection-valued function P as

 $P(c(t)) \dot{v}(t)=0$

or in other words:[17]

The velocity vector of v must be normal to the surface.

Arnold has suggested[18][19] that since parallel transport on a geodesic segment is easy to describe, parallel transport on an arbitrary C1 curve could be constructed as a limit of parallel transport on an approximating family of piecewise geodesic curves.[20]

This equation shows once more that parallel transport depends only on the metric structure so is an intrinsic invariant of the surface; it is another way of writing the ordinary differential equation involving the geodesic curvature of c. Parallel transport can be extended immediately to piecewise C1 curves.

The covariant derivative can in turn be recovered from parallel transport.[21] In fact $\nabla_X Y$ can be calculated at a point p, by taking a curve c through p with tangent X, using parallel transport to view the restriction of Y to c as a function in the tangent space at p and then taking the derivative.

## Orthonormal frame bundle

Let M be a surface embedded in E3. The orientation on the surface means that an "outward pointing" normal unit vector n is defined at each point of the surface and hence a determinant can be defined on tangent vectors v and w at that point:

$\mathrm{det}({\mathbf v}, {\mathbf w}) = ({\mathbf v} \times {\mathbf w})\cdot {\mathbf n},$

using the usual scalar triple product on E3 (itself a determinant).

An ordered basis or frame v, w in the tangent space is said to be oriented if det(v, w) is positive.

• The tangent bundle of M consists of pairs (p, v) in M x E3 such that v lies in the tangent plane to M at p.
• The circle bundle of M consists of pairs (p, v) with ||v|| = 1. It is identical to the frame bundle because for each unit tangent vector v there is a unique tangent vector w with det(v, w) = 1.

Since the group of rotations in the plane SO(2) acts simply transitively on oriented orthonormal frames in the plane, it follows that it also acts on the frame or circle bundles of M.[8] The definitions of the tangent bundle, the unit tangent bundle and the (oriented orthonormal) frame bundle E can be extended to arbitrary surfaces in the usual way.[8][22] There is a similar identification between the latter two which again become principal SO(2)-bundles. In other words:

The frame bundle is a principal bundle with structure group SO(2).

There is also a corresponding notion of parallel transport in the setting of frame bundles:[23][24]

Every continuously differentiable curve in M can be lifted to a curve in E in such a way that the tangent vector field of the lifted curve is the lift of the tangent vector field of the original curve.

This statement means that any frame on a curve can be parallelly transported along the curve. This is precisely the idea of "moving frames". Since any unit tangent vector can be completed uniquely to an oriented frame, parallel transport of tangent vectors implies (and is equivalent to) parallel transport of frames. The lift of a geodesic in M turns out to be a geodesic in E for the Sasaki metric (see below).[25] Moreover the Gauss map of M into S2 induces a natural map between the associated frame bundles which is equivariant for the actions of SO(2).[26]

Cartan's idea of introducing the frame bundle as a central object was the natural culmination of the theory of moving frames, developed in France by Darboux and Goursat. It also echoed parallel developments in Albert Einstein's theory of relativity.[27] Objects appearing in the formulas of Gauss, such as the Christoffel symbols, can be given a natural geometric interpretation in this framework. Unlike the more intuitive normal bundle, easily visualised as a tubular neighbourhood of an embedded surface in E3, the frame bundle is an intrinsic invariant that can be defined independently of an embedding. When there is an embedding, it can also be visualised as a subbundle of the Euclidean frame bundle E3 x SO(3), itself a submanifold of E3 x M3(R).

## Principal connection

The theory of connections according to Élie Cartan, and later Charles Ehresmann, revolves around:[28]

All "natural" vector bundles associated with the manifold M, such as the tangent bundle, the cotangent bundle or the exterior bundles, can be constructed from the frame bundle using the representation theory of the structure group K = SO(2), a compact matrix group.

Cartan's definition of a connection can be understood as a way of lifting vector fields on M to vector fields on the frame bundle E invariant under the action of the structure group K. Since parallel transport has been defined as a way of lifting piecewise C1 paths from M to E, this automatically induces infinitesimally a way to lift vector fields or tangent vectors from M to E. At a point take a path with given tangent vector and then map it to the tangent vector of the lifted path. (For vector fields the curves can be taken to be the integral curves of a local flow.) In this way any vector field X on M can be lifted to a vector field X* on E satisfying[29]

• X* is a vector field on E;
• the map XX* is C(M)-linear;
• X* is K-invariant and induces the vector field X on C(M) $\subset$ C(E).

Here K acts as a periodic flow on E, so the canonical generator A of its Lie algebra acts as the corresponding vector field, called the vertical vector field A*. It follows from the above conditions that, in the tangent space of an arbitrary point in E, the lifts X* span a two-dimensional subspace of horizontal vectors, forming a complementary subspace to the vertical vectors. The canonical Riemannian metric on E of Shigeo Sasaki is defined by making the horizontal and vertical subspaces orthogonal, giving each subspace its natural inner product.[25][30]

Horizontal vector fields admit the following characterisation:

• Every K-invariant horizontal vector field on E has the form X* for a unique vector field X on M.

This "universal lift" then immediately induces lifts to vector bundles associated with E and hence allows the covariant derivative, and its generalisation to forms, to be recovered.

If σ is a representation of K on a finite-dimensional vector space V, then the associated vector bundle E XK V over M has a C(M)-module of sections that can be identified with

$C^\infty(E,V)^K,$

the space of all smooth functions ξ : E → V which are K-equivariant in the sense that

$\xi(x\cdot g) = \sigma(g^{-1})\xi(x)$

for all x ∈ E and g ∈ K.

The identity representation of SO(2) on R2 corresponds to the tangent bundle of M.

The covariant derivative $\nabla_X$ is defined on an invariant section ξ by the formula

 $\nabla_X \xi= (X^*\otimes I)\xi.$

The connection on the frame bundle can also be described using K-invariant differential 1-forms on E.[8] [31]

The frame bundle E is a 3-manifold. The space of p-forms on E is denoted Λp(E).[32] It admits a natural action of the structure group K.

Given a connection on the principal bundle E corresponding to a lift XX* of vector fields on M, there is a unique connection form ω in

$\Lambda^1(E)^K$,

the space of K-invariant 1-forms on E, such that[22]

$\omega(X^*)= 0$

for all vector fields X on M and

$\omega(A^*)= 1,$

for the vector field A* on E corresponding to the canonical generator A of $\mathfrak k$.

Conversely the lift X* is uniquely characterised by the following properties:

• X* is K-invariant and induces X on M;
• ω(X*)=0.

## Cartan structural equations

On the frame bundle E of a surface M there are three canonical 1-forms:

• The connection form ω, invariant under the structure group K = SO(2)
• Two tautologous 1-forms θ1 and θ2, transforming according to the basis vectors of the identity representation of K

If π: E $\rightarrow$ M is the nature projection, the 1-forms θ1 and θ2 are defined by

$\theta_i(Y) = (d\pi(Y), e_i)$

where Y is a vector field on E and e1, e2 are the tangent vectors to M of the orthonormal frame.

These 1-forms satisfy the following structural equations, due in this formulation to Cartan:[33]

 $d\theta_1 = \omega\wedge\theta_2, \,\, d\theta_2= - \omega\wedge \theta_1$
(First structural equations)
 $d\omega= -(K\circ \pi)\theta_1\wedge\theta_2$
(Second structural equation)

where K is the Gaussian curvature on M.

## Holonomy and curvature

Main article: Holonomy

Parallel transport in the frame bundle can be used to show that the Gaussian curvature of a surface M measures the amount of rotation obtained by translating vectors around small curves in M.[34] Holonomy is exactly the phenomenon that occurs when a tangent vector (or orthonormal frame) is parallelly transported around a closed curve. The vector reached when the loop is closed will be a rotation of the original vector, i.e. it will correspond to an element of the rotaion group SO(2), in other words an angle modulo 2π. This is the holonomy of the loop, because the angle does not depend on the choice of starting vector.

Geometric interpretation of the Lie bracket of two vector fields

This geometric interpretation of curvature relies on a similar geometric of the Lie bracket of two vector fields on E. Let U1 and U2 be vector fields on E with corresponding local flows αt and βt.

• Starting at a point A corresponding to x in E, travel $\sqrt{s}$ along the integral curve for U1 to the point B at $\alpha_{\sqrt{s}}(x)$.
• Travel from B by going $\sqrt{s}$ along the integral curve for U2 to the point C at $\beta_{\sqrt{s}} \alpha_{\sqrt{s}}(x)$.
• Travel from C by going $-\sqrt{s}$ along the integral curve for U1 to the point D at $\alpha_{-\sqrt{s}}\beta_{\sqrt{s}} \alpha_{\sqrt{s}}(x)$.
• Travel from D by going $-\sqrt{s}$ along the integral curve for U2 to the point E at $\beta_{-\sqrt{s}}\alpha_{-\sqrt{s}}\beta_{\sqrt{s}} \alpha_{\sqrt{s}}(x)$.

In general the end point E will differ from the starting point A. As s $\rightarrow$ 0, the end point E will trace out a curve through A. The Lie bracket [U1,U2] at x is precisely the tangent vector to this curve at A.[35]

To apply this theory, introduce vector fields U1, U2 and V on the frame bundle E which are dual to the 1-forms θ1, θ2 and ω at each point. Thus

$\omega(U_i)=0, \, \theta_i(V) =0,\, \omega(V)=1,\, \theta_i(U_j)=\delta_{ij}.$

Moreover V is invariant under K and U1, U2 transform according to the identity representation of K.

The structural equations of Cartan imply the following Lie bracket relations:

 $[V,U_1]=U_2, \,\,\,\, [V,U_2]=-U_1, \,\,\, \, [U_1,U_2]=(K\circ\pi) V$

The geometrical interpretation of the Lie bracket can be applied to the last of these equations. Since ω(Ui)=0, the flows αt and βt in E are lifts by parallel transport of their projections in M.

Informally the idea is as follows. The starting point A and end point E essentially differ by an element of SO(2), that is an angle of rotation. The area enclosed by the projected path in M is approximately $\sqrt{s}\cdot\sqrt{s}=s$. So in the limit as s $\rightarrow$ 0, the angle of rotation divided by this area tends to the coefficient of V, i.e. the curvature.

This reasoning is made precise in the following result.[36]

Let f be a diffeomorphism of an open disc in the plane into M and let Δ be a triangle in this disc. Then the holonomy angle of the loop

formed by the image under f of the perimeter of the triangle is given by the integral of the Gauss curvature of the image under f of the inside of the triangle.

In symbols, the holonomy angle mod 2π is given by

 $\theta= \int_{f(\Delta)} K$

where the integral is with respect to the area form on M.

This result implies the relation between Gaussian curvature because as the triangle shrinks in size to a point, the ratio of this angle to the area tends to the Gaussian curvature at the point. The result can be proved by a combination of Stokes's theorem and Cartan's structural equations and can in turn be used to obtain a generalisation of Gauss's theorem on geodesics triangles to more general triangles.[37]

One of the other standard approaches to curvature, through the covariant derivative $\nabla_X$, identifies the difference

$R(X,Y)=\nabla_X \nabla_Y - \nabla_Y\nabla_X - \nabla_{[X,Y]}$

as a field of endomorphisms of the tangent bundle, the Riemann curvature tensor.[22][38] Since $\nabla_X$ is induced by the lifted vector field X* on E, the use of the vector fields Ui and V and their Lie brackets is more or less equivalent to this approach. The vertical vector field W=A* corresponding to the canonical generator A of $\mathfrak k$ could also be added since it commutes with V and satisfies [W,U1] = U2 and [W,U2] = —U1.

## Example: the 2-sphere

The differential geometry of the 2-sphere can be approached from three different points of view:

S2 can be identified with the unit sphere in E3

$S^2=\{a\in E^3\colon\|a\|=1\}.$

Its tangent bundle T, unit tangent bundle U and oriented orthonormal frame bundle E are given by

$T=\{(a,v)\colon \|a\|=1,\, a\cdot v=0\},$
$U=\{(a,v)\colon\|a\|=1, \,\|v\|=1,\, a\cdot v=0\},$
$E=\{(a,e_1,e_2)\colon (e_1 \times e_2)\cdot a=1, \, \|a\|=1, \, \|e_i\|=1, \, a\cdot e_i = 0, \, e_1\cdot e_2=0 \}.$

The map sending (a,v) to (a, v, a x v) allows U and E to be identified.

Let

$Q(a)v= (v\cdot a) a$

be the orthogonal projection onto the normal vector at a, so that

$P(a) = I-Q(a)$

is the orthogonal projection onto the tangent space at a.

The group G = SO(3) acts by rotation on E3 leaving S2 invariant. The stabilizer subgroup K of the vector (1,0,0) in E3 may be identified with SO(2) and hence

S2 may be identified with SO(3)/SO(2).

This action extends to an action on T, U and E by making G act on each component. G acts transitively on S2 and simply transitively on U and E.

The action of SO(3) on E commutes with the action of SO(2) on E that rotates frames

$(e_1,e_2)\mapsto (\cos \theta \, e_1 - \sin \theta \,e_2, \sin \theta\, e_1 + \cos \theta \,e_2).$

Thus E becomes a principal bundle with structure group K. Taking the G-orbit of the point ((1,0,0),(0,1,0),(0,0,1)), the space E may be identified with G. Under this identification the actions of G and K on E become left and right translation. In other words:

The oriented orthonormal frame bundle of S2 may be identified with SO(3).

The Lie algebra $\mathfrak g$ of SO(3) consists of all skew-symmetric real 3 x 3 matrices.[39] the adjoint action of G by conjugation on $\mathfrak g$ reproduces the action of G on E3. The group SU(2) has a 3-dimensional Lie algebra consisting of complex skew-hermitian traceless 2 x 2 matrices, which is isomorphic to $\mathfrak g$. The adjoint action of SU(2) factors through its centre, the matrices ± I. Under these identifications, SU(2) is exhibited as a double cover of SO(3), so that SO(3) = SU(2) / ± I.[40] On the other hand SU(2) is diffeomorphic to the 3-sphere and under this identification the standard Riemannian metric on the 3-sphere becomes the essentially unique biinvariant Riemannian metric on SU(2). Under the quotient by ± I, SO(3) can be identified with the real projective space of dimension 3 and itself has an essentially unique biinvariant Riemannian metric. The geometric exponential map for this metric at I coincides with the usual exponential function on matrices and thus the geodesics through I are have the form exp Xt where X is a skew-symmetric matrix. In this case the Sasaki metric agrees with this biinvariant metric on SO(3).[41][42]

The actions of G on itself, and hence on C(G) by left and right translation induce infinitesimal actions of $\mathfrak g$ on C(G) by vector fields

$\lambda(X) f(g)={d\over dt}f(e^{-Xt}g)|_{t=0},\,\, \rho(X) f(g)={d\over dt}f(ge^{Xt})|_{t=0}.$

The right and left invariant vector fields are related by the formula

$\lambda(X)f(g)=-\rho(g^{-1}Xg)f(g).$

The vector fields λ(X) and ρ(X) commute with right and left translation and give all right and left invariant vector fields on G. Since C(S2) = C(G/K) can be identified with C(G)K, the function invariant under right translation by K, the operators λ(X) also induces vector fields Π(X) on S2.

Let A, B, C be the standard basis of $\mathfrak g$ given by

$A= \begin{pmatrix} 0 & 1 & 0 \\ -1 & 0 & 0 \\ 0 & 0 & 0\end{pmatrix},\,\,B=\begin{pmatrix} 0 & 0 & 0 \\ 0 & 0 & 1 \\ 0 & -1 & 0\end{pmatrix}, \,\, C=\begin{pmatrix} 0 & 0 & 1 \\ 0 & 0 & 0 \\ -1 & 0 & 0\end{pmatrix}.$

Their Lie brackets [X,Y] = XYYX are given by

$[A,B]=C,\,\,[B,C]=A,\,\, [C,A]=B.$

The vector fields λ(A), λ(B), λ(C) form a basis of the tangent space at each point of G.

Similarly the left invariant vector fields ρ(A), ρ(B), ρ(C) form a basis of the tangent space at each point of G. Let α, β, γ be the corresponding dual basis of left invariant 1-forms on G.[43] The Lie bracket relations imply the Maurer-Cartan equations

$d\alpha =\beta\wedge \gamma,\,\, d\beta= \gamma\wedge \alpha, \,\, d\gamma=\alpha\wedge\beta.$

These are also the corresponding components of the Maurer-Cartan form

$\omega_G=g^{-1}dg,$

a left invariant matrix-valued 1-form on G, which satisfies the relation

$d\omega_G = -(g^{-1} dg\, g^{-1})dg = -\omega_G\wedge \omega_G.$

The inner product on $\mathfrak g$ defined by

$(X,Y)= \mathrm{Tr}\, XY^T$

is invariant under the adjoint action. Let π be the orthogonal projection onto the subspace generated by A, i.e. onto $\mathfrak k$, the Lie algebra of K. For X in $\mathfrak g$, the lift of the vector field Π(X) from C(G/K) to C(G) is given by the formula

 $\Pi(X)^* f(g) = -\rho(\pi(g^{-1}Xg))f(g)$

This lift is G-equivariant on vector fields of the form Π(X) and has a unique extension to more general vector fields on G / K.

The left invariant 1-form α is the connection form ω on G corresponding to this lift. The other two 1-forms in the Cartan structural equations are given by θ1 = β and θ2 = γ. The structural equations themselves are just the Maurer-Cartan equations. In other words;

The Cartan structural equations for SO(3)/SO(2) reduce to the Maurer-Cartan equations for the left invariant 1-forms on SO(3).

Since α is the connection form,

• vertical vector fields on G are those of the form f · λ(A) with f in C(G);
• horizontal vector fields on G are those of the form f1 · λ(B) + f2 · λ(C) with fi in C(G).

The existence of the basis vector fields λ(A), λ(B), λ(C) shows that SO(3) is parallelizable. This is not true for SO(3)/SO(2) by the hairy ball theorem: S2 does not admit any nowhere vanishing vector fields.

Parallel transport in the frame bundle amounts to lifting a path from SO(3)/SO(2) to SO(3). It can be accomplished by directly solving a matrix-valued ordinary differential equation ("transport equation") of the form gt = A · g where A(t) is skew-symmetric and g takes values in SO(3).[44][45][46]

In fact it is equivalent and more convenient to lift a path from SO(3)/O(2) to SO(3). Note that O(2) is the normaliser of SO(2) in SO(3) and the quotient group O(2)/SO(2), the so-called Weyl group, is a group of order 2 which acts on SO(3)/SO(2) = S2 as the antipodal map. The quotient SO(3)/O(2) is the real projective plane. It can be identified with space of rank one or rank two projections Q in M3(R). Taking Q to be a rank 2 projection and setting F = 2QI, a model of the surface SO(3)/O(2) is given by matrices F satisfying F2 = I, F = FT and Tr F = 1. Taking F0= diag (–1,1,1) as base point, every F can be written in the form g F0 g−1.

Given a path F(t), the ordinary differential equation $g_t g^{-1} = F_t F/2$, with initial condition $g(0)=I$, has a unique C1 solution g(t) with values in G, giving the lift by parallel transport of F.

If Q(t) is the corresponding path of rank 2 projections, the conditions for parallel transport are

$Q = gQ_0 g^{-1},\,\, Q_0 g^{-1} \dot{g} Q_0 = 0$

Set A = ½Ft F. Since F2 = I and F is symmetric, A is skew-symmetric and satisfies QAQ = 0.

The unique solution g(t) of the ordinary differential equation

$\dot{g} = A g \,$

with initial condition g(0) = I guaranteed by the Picard–Lindelöf theorem, must have gTg constant and therefore I, since

${d\over dt} (g^T g)= \dot{g}^Tg +g^T\dot{g}= g^T(A^T +A)g=0.$

Moreover

$F(t) = g(t) F(0) g(t)^{-1} \,$

since g−1Fg has derivative 0:

${d\over dt} (g^{-1}Fg) = -g^{-1} \dot{g} g^{-1} Fg + g^{-1}\dot{F} g + g^{-1}F\dot{g} = g^{-1}(-\dot{g}g^{-1}F + \dot{F} +F \dot{g}g^{-1})g=0.$

Hence Q = g Q0 g−1. The condition QAQ=0 implies Q gt g−1 Q = 0 and hence that Q0 g−1 gt Q0 =0.[47]

There is another kinematic way of understanding parallel transport and geodesic curvature in terms of "rolling without slipping or twisting". Although well known to differential geometers since the early part of the twentieth century, it has also been applied to problems in engineering and robotics.[48] Consider the 2-sphere as a rigid body in three-dimensional space rolling without slipping or twisting on a horizontal plane. The point of contact will describe a curve in the plane and on the surface. At each point of contact the different tangent planes of the sphere can be identified with the horizontal plane itself and hence with one another.

• The usual curvature of the planar curve is the geodesic curvature of the curve traced on the sphere.
• This identification of the tangent planes along the curve corresponds to parallel transport.

This is particularly easy to visualize for a sphere: it is exactly the way a marble can be rolled along a perfectly flat table top.

The roles of the plane and the sphere can be reversed to provide an alternative but equivalent point of view. The sphere is regarded as fixed and the plane has to roll without slipping or twisting along the given curve on the sphere.[49]

## Embedded surfaces

When a surface M is embedded in E3, the Gauss map from M $\rightarrow$ S2 extends to a SO(2)-equivariant map between the orthonormal frame bundles E $\rightarrow$ SO(3). Indeed the triad consisting of the tangent frame and the normal vector gives an element of SO(3).

In 1956 Kobayashi proved that:[50]

Under the extended Gauss map, the connection on SO(3) induces the connection on E.

This means that the forms ω, θ1 and θ2 on E are obtained by pulling back those on SO(3); and that lifting paths from M to E can be accomplished by mapping the path to the 2-sphere, lifting the path to SO(3) and then pulling back the lift to E. Thus for embedded surfaces, the 2-sphere with the principal connection on its frame bundle provides a "universal model", the prototype for the universal bundles discussed in Narasimhan & Ramanan (1965).

In more concrete terms this allows parallel transport to be described explicitly using the transport equation. Parallel transport along a curve c(t), with t taking values in [0,1], starting from a tangent from a tangent vector v0 also amounts to finding a map v(t) from [0,1] to R3 such that

• v(t) is a tangent vector to M at c(t) with v(0) = v0.
• the velocity vector $\dot{v}(t)$ is normal to the surface at c(t), i.e. P(c(t))v(t)=0.

This always has a unique solution, called the parallel transport of v0 along c.

The existence of parallel transport can be deduced using the analytic method described for SO(3)/SO(2), which from a path into the rank two projections Q(t) starting at Q0 produced a path g(t) in SO(3) starting at I such that

$Q = g Q_0 g^{-1}, \, \, \,Q_0 g^{-1} \dot{g} Q_0= 0.$

g(t) is the unique solution of the transport equation

 gtg−1 = ½ Ft F

with g(0) = I and F = 2Q − I. Applying this with Q(t) = P(c(t)), it follows that, given a tangent vector v0 in the tangent space to M at c(0), the vector v(t)=g(t)v0 lies in the tangent space to M at c(t) and satisfies the equation

$P(c(t))\dot{v}(t) =0.$

It therefore is exactly the parallel transport of v along the curve c.[45] In this case the length of the vector v(t) is constant. More generally if another initial tangent vector u0 is taken instead of v0, the inner product (v(t),u(t)) is constant. The tangent spaces along the curve c(t) are thus canonically identified as inner product spaces by parallel transport so that parallel transport gives an isometry between the tangent planes. The condition on the velocity vector $\dot{v}(t)$ may be rewritten in terms of the covariant derivative as[22][51]

 $\nabla_{\dot{c}} v = 0$

the defining equation for parallel transport.

The kinematic way of understanding parallel transport for the sphere applies equally well to any closed surface in E3 regarded as a rigid body in three-dimensional space rolling without slipping or twisting on a horizontal plane. The point of contact will describe a curve in the plane and on the surface. As for the sphere, the usual curvature of the planar curve equals the geodesic curvature of the curve traced on the surface.

This geometric way of viewing parallel transport can also be directly expressed in the language of geometry.[52] The envelope of the tangent planes to M along a curve c is a surface with vanishing Gaussian curvature, which by Minding's theorem, must be locally isometric to the Euclidean plane. This identification allows parallel transport to be defined, because in the Euclidean plane all tangent planes are identified with the space itself.

There is another simple way of constructing the connection form ω using the embedding of M in E3.[53]

The tangent vectors e1 and e2 of a frame on M define smooth functions from E with values in R3, so each gives a 3-vector of functions and in particular de1 is a 3-vector of 1-forms on E.

The connection form is given by

 $\omega= de_1 \cdot e_2$

taking the usual scalar product on 3-vectors.

## Gauss-Codazzi equations

When M is embedded in E3, two other 1-forms ψ and χ can be defined on the frame bundle E using the shape operator.[54][55][56] Indeed the Gauss map induces a K-equivariant map of E into SO(3), the frame bundle of S2 = SO(3)/SO(2). The form ω is the pullback of one of the three right invariant Maurer-Cartan forms on SO(3). The 1-forms ψ and χ are defined to be the pullbacks of the other two.

These 1-forms satisfy the following structure equations:

 $\psi\wedge \theta_1 + \chi\wedge \theta_2=0$
(symmetry equation)
 $d\omega= \psi\wedge \chi$
(Gauss equation)
 $d\psi=\chi\wedge\omega, \,\, d\chi=\omega\wedge\psi$
(Codazzi equations)

The Gauss–Codazzi equations for χ, ψ and ω follow immediately from the Maurer-Cartan equations for the three right invariant 1-forms on SO(3).

One of the most comprehensive introductory surveys of the subject, charting the historical development from before Gauss to modern times, is by Berger (2004). Graduate-level treatments of the Riemannian connection can be found in Singer & Thorpe (1967), do Carmo (1976) and O'Neill (1997). Accessible introductions to Cartan's approach to connections using moving frames can be found in Ivey & Landsberg (2003) and Sharpe (1997). The classic treatment of connections can be found in Kobayashi & Nomizu (1963).

## Notes

1. ^ Eisenhart 2004
2. ^ Kreyszig 1991
3. ^ Berger 2004
4. ^ Wilson 2008
5. ^ Kobayashi & Nomizu 1969, Chapter XII.
6. ^ do Carmo 1976
7. ^ O'Neill 1997
8. ^ a b c d Singer & Thorpe 1967
9. ^ Kobayashi & Nomizu 1967, p. 287
10. ^ a b Levi-Civita 1917
11. ^ Darboux 1887,1889,1896
12. ^ Kobayashi & Nomizu 1969
13. ^ Ivey & Landsberg 2003 This approach, together with its higher-dimensional generalisations, is discussed in great detail in Chapters 1 and 2.
14. ^ Kobayashi & Nomizu 1963, p. 160
15. ^ Berger 2004, p. 127
16. ^ Berger 2004, p. 129
17. ^ A fuller discussion is given in the section on embedded surfaces.
18. ^ Arnold 1982, pp. 301–306, Appendix I.
19. ^ Berger 2004, pp. 263–264
20. ^ Arnold's method of approximation also applies to higher-dimensional Riemannian manifolds, after having given an appropriate geometric description of parallel transport along a geodesic. Parallel transport can be shown to be a continuous function on the Sobolev space of paths of finite energy, introduced in Klingenberg (1982). In this case the ordinary differential equation $\theta_t= a(t)$ is solved by an integral which depends continuously on a as a varies through piecewise continuous or even just square integrable functions. The higher-dimensional case requires the transport equation gt = A g and an extension of the analysis in Nelson (1969).
21. ^ do Carmo 1992, pp. 56–57
22. ^ a b c d Kobayashi & Nomizu 1963
23. ^ Kobayashi & Nomizu 1963, pp. 68–71
24. ^ Singer & Thorpe 1967, pp. 181–184
25. ^ a b Sasaki 1958
26. ^ Kobayashi 1956
27. ^ Ivey & Landsberg 2003
28. ^ The definition presented here is due essentially to Charles Ehresmann. However, it is different from, though related to, what is commonly called an Ehresmann connection. It is also different from, though related to, what is commonly called a Cartan connection. See Kobayashi (1957) and Sharpe (1997) for a survey of some of the various types of connections and the relations between them.
29. ^ Kobayashi & Nomizu 1963, pp. 63–64
30. ^ Berger 2004, pp. 727–728
31. ^ A general connection on a principal bundle E with structure group H is described by a 1-form on E with values in $\mathfrak h$ invariant under the tensor product of the action of H on 1-forms and the adjoint action. For surfaces, H is Abelian and 1-dimensional, so the connection 1-form is essentially given by an invariant 1-form on E.
32. ^ The space of p-forms can be identified with the space of alternating p-fold C(E)-multilinear maps on the module of vector fields. For further details see Helgason (1978), pages 19–21.
33. ^ Singer & Thorpe 1967, pp. 185–189
34. ^ Singer & Thorpe 1967, pp. 190–193
35. ^ Singer & Thorpe 1967, p. 143
36. ^ Singer, Thorpe & 1967 p191
37. ^ Singer & Thorpe 1967, p. 195
38. ^ do Carmo 1992
39. ^ The Lie algebra of a closed connected subgroup G of a real or complex general linear group consists of all matrices X such that exp tX lies in G for all real t; see Adams (1983) or Varadarajan (1984).
40. ^ Geometrically this double cover corresponds to a spin structure on S2.
41. ^ Klingenberg & Sasaki 1975
42. ^ Arnold 1978, Appendix 2: Geodesics of left-invariant metrics on Lie groups and the hydrodynamics of ideal fluids.
43. ^ Varadarajan 1984, p. 138
44. ^ Kobayashi & Nomizu 1963, p. 69
45. ^ a b This standard treatment of parallel transport can be found for example in Driver (1995, p. 25).
46. ^ In mathematical physics, the solution of this differential equation is often expressed as a path-ordered exponential; see for example Nelson (1969).
47. ^ A similar argument applies to the transitive action by conjugation of SU(2) on matrices F = 2QI with Q a rank one projection in M2(C). This action is trivial on ± I, so passes to a transitive action of SO(3) with stabilizer subgroup SO(2), showing that these matrices provide another model for S2. This is standard material in gauge theory on SU(2); see for example Narasimhan & Ramadas (1979).
48. ^ Sharpe 1997, pp. 375–388, Appendix B: Rolling without Slipping or Twisting
49. ^ Berger 2004, p. 130
50. ^ Kobayashi 1956, Theorem II.
51. ^ do Carmo 1992, p. 52
52. ^ do Carmo 1976, p. 244
53. ^ Singer & Thorpe 1967, pp. 221–223
54. ^ O'Neill 1997, pp. 256–257
55. ^ Ivey & Landsberg 2003, Chapter 2.
56. ^ Kobayashi & Nomizu 1969, Chapter VII.