Selective fire means the capability of a weapon to be adjusted to fire in semi-automatic, multi-short burst, and/or automatic firing mode. The modes are chosen by means of a selector which varies depending on the weapon's design. Some selective-fire weapons have burst fire mechanisms to limit the maximum number of shots fired automatically in this mode. The most common limits are two or three rounds per trigger pull. Fully automatic fire refers to the ability for a weapon to fire continuously until either the feeding mechanism is emptied or the trigger is released. Semi-automatic refers to the ability to fire one round per trigger pull.
The presence of selective-fire modes on firearms permits more efficient use of rounds to be fired for specific needs, versus having a single mode of operation, such as fully automatic, thereby conserving ammunition while maximizing on-target accuracy and effectiveness. This capability is most commonly found on assault rifles and military weapons of the 20th and 21st centuries.
Early attempts at this technology were hindered by one or both of two obstacles, over-powerful ammunition and mechanical complexity. The latter led to excessive weight and unreliability in the firearm. One of the earliest designs dates to just before the end of the 19th century with the development of the Cei-Rigotti, an early automatic rifle created by Italian Army officer Amerigo Cei-Rigotti that had selective-fire capability (single shots or burst).
Another is the M1918 Browning Automatic Rifle (BAR) developed during the first World War. The BAR and its subsequent designs incorporated a variety of selective-fire functions. The first design (M1918) is a selective-fire, air-cooled automatic rifle that used a trigger mechanism with a fire selector lever that enabled operating in either semi-automatic or fully automatic firing modes. The selector lever is located on the left side of the receiver and is simultaneously the manual safety (selector lever in the "S" position – weapon is "safe", "F" – "Fire", "A" – "Automatic" fire).:225–226 The next version (M1918A1) had a unique rate-of-fire reducer mechanism purchased from FN Herstal with two rates of automatic fire. This reducer mechanism was later changed to one designed by the Springfield Armory. The final version (M1918A2) provided two selectable rates of fully automatic fire only.:131–139
During World War II the Germans began development of the selective-fire function which resulted in the FG 42 battle rifle developed in 1942 at the request of the German Air Force (Luftwaffe) in 1941. Another German design that used selective fire was the StG 44 (abbreviation of Sturmgewehr 44 or "assault rifle 44") that was the first of its kind to see major deployment and is considered by many historians to be the first modern assault rifle. "The principle of this weapon -- the reduction of muzzle impulse to get useful automatic fire within actual ranges of combat -- was probably the most important advance in small arms since the invention of smokeless powder."
Selective-fire weapons, by definition, have a semi-automatic mode, where the weapon automatically reloads the chamber after each fired round, but requires the trigger be released and pulled again before firing the next round. This allows for rapid and (in theory) aimed fire. In some weapons, the selection is between different rates of automatic fire and/or varying burst limiters. The selection is often by a small rotating switch often integrated with the safety catch or a switch separate from the safety, as in the British SA80 family. Another method is a weighted trigger, such as the Steyr AUG, which will fire a single shot when 8.8 – 15.4 pounds of weight is exerted on the trigger, and then become fully automatic when over 15.4 pounds of weight is applied. This is useful for emergency situations where a rapid volley of rounds is more effective for suppressing a close enemy rather than a single-round burst.
Some selective-fire weapons offer a burst mode as the second option, where each pull of the trigger automatically fires a predetermined number of rounds (generally two or three), but won't fire any more until the trigger is pulled again. The current U.S. standard assault rifle, the M16A4, and the M4 carbine variant of this rifle fire a maximum of three rounds with each pull of the trigger in burst mode. In this design, it retains the count of previously fired rounds and may fire fewer than three rounds. Other designs reset the count with each trigger pull, allowing a uniform three-round burst as long as rounds remain.
A common version of the Heckler & Koch MP5 submachine gun (which is widely used by SWAT teams and military special operations personnel) fires single shots, three-round-bursts, and automatically. A special variant uses a two-round-burst to minimize the chances of missing with a third round. Some automatic cannons have larger burst limiters to coincide with higher rates of fire.
- Bump fire, a method used for simulating fully automatic fire
- Selective-fire shotgun
- List of firearms
- Ezell, Virginia; Gander, Terry J (December 1, 2000). "Assault Rifles and Their Technology". Retrieved 8 December 2014 – via HighBeam Research. (subscription required (. ))
- Daniel D. Musgrave; Thomas B. Nelson (1967). The World's Assault Rifles and Automatic Carbines. T. B. N. Enterprises. p. 225.
- Ballou, James L., Rock in a Hard Place: The Browning Automatic Rifle, Ontario, California: Collector Grade Publications Inc., ISBN 0-88935-263-1 (2000)
- Dugelby, Thomas B.; R. Blake Stevens (2007) . Death from Above—The German FG42 Paratroop Rifle. Cobourg, ON: Collector Grade Publications. ISBN 0-88935-429-4.
- ASSAULT RIFLES AND THEIR AMMUNITION: HISTORY AND PROSPECTS by Anthony G Williams
- http://pogoarchives.org/labyrinth/09/02.pdf M16 Rifle Case Study. Prepared for the President's Blue Ribbon Defense Panel. March 16, 1970. By Richard R. Hallock, Colonel U.S. Army (Retired)
- Gordon, Duncan (December 1, 2000). "Beyond the assault rifle". Retrieved 8 December 2014 – via HighBeam Research. (subscription required (. ))