||This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (September 2011) (Learn how and when to remove this template message)|
Signal-to-Quantization-Noise Ratio (SQNR or SNqR) is widely used quality measure in analysing digitizing schemes such as PCM (pulse code modulation) and multimedia codecs. The SQNR reflects the relationship between the maximum nominal signal strength and the quantization error (also known as quantization noise) introduced in the analog-to-digital conversion.
- is the probability of received bit error
- is the peak message signal level
- is the mean message signal level
As SQNR applies to quantized signals, the formulae for SQNR refer to discrete-time digital signals. Instead of , we will use the digitized signal . For quantization steps, each sample, requires bits. The probability distribution function (pdf) representing the distribution of values in and can be denoted as . The maximum magnitude value of any is denoted by .
As SQNR, like SNR, is a ratio of signal power to some noise power, it can be calculated as:
The signal power is:
The quantization noise power can be expressed as:
When the SQNR is desired in terms of Decibels (dB), a useful approximation to SQNR is:
where is the number of bits in a quantized sample, and is the signal power calculated above. Note that for each bit added to a sample, the SQNR goes up by approximately 6dB ().
- B.P.Lathi , Modern Digital and Analog Communication Systems (3rd edition), Oxford University Press, 1998
- Signal to quantization noise in quantized sinusoidal - Analysis of quantization error on a sine wave