Jump to content

Soo Line 1003

From Wikipedia, the free encyclopedia
Soo Line 1003
Soo Line No. 1003 operating in Slinger, Wisconsin on November 2, 2019
Type and origin
Power typeSteam
BuilderAmerican Locomotive Company
Serial number52826
Build dateMarch 1913
Rebuild dateNovember 1941
Specifications
Configuration:
 • Whyte2-8-2
 • UIC1′D1′ h2
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Leading dia.33 in (838 mm)
Driver dia.63 in (1,600 mm)
Trailing dia.42 in (1,067 mm)
Loco weight290,000 lb (131,500 kg; 131.5 t)
Fuel typeCoal
Fuel capacity35,000 lb (15,900 kg; 15.9 t)
Water cap.10,000 US gal (38,000 L; 8,300 imp gal)
Boiler pressure170 lbf/in2 (1.17 MPa)
CylindersTwo, outside
Cylinder size28 in × 30 in (711 mm × 762 mm)
Valve gearWalschaerts
Valve typePiston valves
Performance figures
Maximum speed50 mph (80 km/h)
Tractive effort53,947 lbf (239.97 kN)
Factor of adh.4.15
Career
OperatorsMinneapolis, St. Paul and Sault Ste. Marie Railroad
Steam Locomotive Heritage Association
ClassL-1
Number in class3rd of 10
NumbersSOO 1003
LocaleUnited States Upper Midwest
RetiredAugust 1959
PreservedDecember 30, 1959
RestoredOctober 27, 1996
Current ownerSteam Locomotive Heritage Association
DispositionOperational
References:[1][2]

Soo Line 1003 is a class "L-1" 2-8-2 "Mikado" type steam locomotive built by the American Locomotive Company (ALCO) in March 1913 as a member of the Minneapolis, St. Paul and Sault Ste. Marie Railroad ("Soo Line") L-1 class. It was retired from regular revenue service in August 1959 and restored to operating condition on October 27, 1996. Today, it is occasionally operated on the major railroads of the American Upper Midwest.

History

[edit]

Revenue service

[edit]

The locomotive was built in 1913 by the American Locomotive Company (ALCO) as a L-1 class 2-8-2 “Mikado” type steam locomotive.[1] A very efficient locomotive design, the design enabled the L-1 class to pull passenger and freight trains.[3] In November 1941, some major repairs and replacement parts were carried out on the locomotive. A larger sandbox was installed, the wooden pilot was swapped out with a new boiler tube steel pilot, and the wood and canvas roof was swapped out for steel and the cab became bigger.[4] The last improvement was that a feed water heater was installed and the superheater itself was replaced with a Elesco type A. No. 1003 was used by the Soo Line mostly to pull freight trains until retirement in August 1959, when it went into serviceable storage in Gladstone, Michigan as part of the railroad's strategic reserve.[1][2][5] The strategic reserve is the main reason why the No. 1003 was not cut up for scrap. On December 30, 1959, the railroad donated the locomotive to the city of Superior, Wisconsin where it was put on public display.[1][2] In the mid 1970s, Superior Shortline Steam Railroad Ltd. was organized to restore the locomotive to operation.[1][2] However, the plan of restoring the locomotive to operating condition never came to fruition.

Excursion service

[edit]

The locomotive was sold partially disassembled in 1993 to Wisconsin Railway Preservation Trust (WRPT), another organization whose goal was to return the locomotive to operations.[1][2] WRPT raised $250,000 for the locomotive's restoration. It was originally hoped that the locomotive could be used for excursion trips on the weekend of October 5, 1996, but boiler tests showed the engine to not be ready in time.[1][2]

No. 1003's first run after restoration under its own power occurred on October 27, 1996, when it steamed up the Duluth, Missabe and Iron Range Railway's Proctor Hill.[1][2] It performed a few more test runs before its first public excursion in 1997. In 1998, it ran the "triple-header" excursion with Northern Pacific 328 and Soo Line 2719.[1][2]

In 2000 and 2001, No. 1003 pulled excursion trains on the Wisconsin and Southern Railroad (WSOR).[6] In July 2002, No. 1003 lead that year's Circus World Museum (CWM) train on the WSOR from Baraboo to Milwaukee, Wisconsin.[6][7]

The locomotive made its final journey under its FRA-mandated 15-year boiler certificate on November 13, 2010. But shortly afterwards, the operators raised funds to have the engine overhauled and certified for another 15 years of operation. No. 1003 returned to service in September 2012, but flue problems delayed its first excursion run until November 2014.[1][2]

See also

[edit]

References

[edit]
  1. ^ a b c d e f g h i j "Soo Line Locomotive 1003". Retrieved September 9, 2022.
  2. ^ a b c d e f g h i "Soo Line #1003 at the Wisconsin Automotive Museum". 23 February 2022. Retrieved April 14, 2023.
  3. ^ "Soo Line locomotive 1003 is a mammoth Mikado". Trains. Retrieved 2023-06-29.
  4. ^ "Soo Line #1003 | Steam Locomotive Heritage Association". Retrieved 2023-08-06.
  5. ^ "Bismarck, Washburn & Great Falls / Minneapolis, St Paul & Sault Ste Marie 2-8-2 "Mikado" Locomotives in the USA". Retrieved April 14, 2023.
  6. ^ a b Nelson (2013), p. 155
  7. ^ Nelson (2013), p. 162

Bibliography

[edit]
  • Gilchinski, Steve (February 1997). "Soo Line 2-8-2 back in steam". Trains magazine. Vol. 57, no. 2. pp. 24–25.
  • Nelson, Bruce (2013). America's Greatest Circus Train (1st ed.). Heimburger House Publishing Company. ISBN 978-0-911581-64-5.
[edit]