Step-index profile

From Wikipedia, the free encyclopedia
  (Redirected from Step-index optical fibre)
Jump to: navigation, search

For an optical fiber, a step-index profile is a refractive index profile characterized by a uniform refractive index within the core and a sharp decrease in refractive index at the core-cladding interface so that the cladding is of a lower refractive index. The step-index profile corresponds to a power-law index profile with the profile parameter approaching infinity. The step-index profile is used in most single-mode fibers[1] and some multimode fibers.[2]

A step-index fiber is characterized by the core and cladding refractive indices n1 and n2 and the core and cladding radii a and b. Examples of standard core and cladding diameters 2a/2b are 8/125, 50/125, 62.5/125, 85/125, or 100/140 (units of µm). The fractional refractive-index change . The value of n1 is typically between 1.44 and 1.46, and is typically between 0.001 and 0.02.

Step-index optical fiber is generally made by doping high-purity fused silica glass (SiO2) with different concentrations of materials like titanium, germanium, or boron.


Pulse dispersion in a step index optical fiber is given by

where

is the difference in refractive indices of core and cladding.
is the refractive index of core
is the length of the optical fiber under observation
is the speed of light

See also[edit]

References[edit]

  1. ^ "SINGLE MODE STEP-INDEX FIBERS". Retrieved 2012-11-23. 
  2. ^ "Fiber Optics Overview". Retrieved 2012-11-23. 

 This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).