Jump to content

Taipei Metro C321

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 76.220.41.94 (talk) at 21:15, 16 August 2016 (Design). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Taipei Metro C321
A Taipei Metro C321 train at a station on 14 December 2005 (destination: Xinpu).
A Full interior of C321 full of passengers during rush hour.
In service1999–present
ManufacturerSiemens Mobility
Built atGermany
Family nameModular Metro
Constructed1998–1999
Number built216 vehicles (36 sets)
Formation3 x 2–cars per trainset
Fleet numbers101/102–171/172
Capacity1914 passengers
OperatorsTaipei Rapid Transit Corporation
DepotsTucheng, Nangang
Lines servedLine 5
Specifications
Car length23.5 m (77 ft)
Width3.2 m (10 ft)
Height3.6 m (12 ft)
Maximum speedDesign: 90 km/h (56 mph)
Service: 80 km/h (50 mph)
Weight39.5 t (DM1/M2)
34 t (T)
Traction systemGTO-VVVF
(Siemens)
Electric system(s)750 V DC Third rail
Safety system(s)ATC (ATO), ATS
Track gauge1,435 mm (4 ft 8+12 in) standard gauge

The Taipei Metro C321 is a type of rolling stock[1] used on the Taipei Metro. It is currently in service on Line 5, following its use on Line 2. The trains were made by Siemens and began operation in 1998 and 1999.

Design

The train design was based on the Modular Metro, while the exterior and interior dimensions and configurations are the same as the C301.

The interior design is used in C341 and C371 where the blue rectangle on top of the lights and the gangway out was situated.

The seats can face forward or backward. Most seats are turquoise, while the Reserved/Priority seats are navy blue. The Priority seats are at the sides, and 8 seats are between doors, while 3 seats are next to the end of the car and doors.

As with the C301 Trains, the Passenger Information Display does not show the doors opening and closing or the time until the refurbishment of the sets. Before the refurbishment, it shows the station design and the terminal. Bicycle racks are available at the 1st and 6th cars.

Train formation

The train was number between x101/x102 to x171/x172,[2] which was the second type of Taipei Metro Trains. Initially it was decided to range from x045/x046 to x115/x116, but to contrast with the older trains, the second digit became '1' instead of '0'.[citation needed]

As with the other MRT train sets, the 1st and 6th cars were always in spot 1 while 2nd and 5th cars were always in spot 2, and the middle carriages were always in spot 3.

Derivatives

The Taipei Metro C341 was developed directly from the C321, using the IGBT-VVVF inverters, for the Tucheng extension of the Bannan Line. The Kaohsiung MRT also uses the Siemens trains derived from the Taipei Metro.

See also

References

  1. ^ "Taipei Metro". Railway Technology.
  2. ^ "Trains Introduction". Introduction of Rapid Transit. Retrieved 2016-04-25.