Toyota Corona (T210)
|Production||July 1957 – December 2001|
|Body and chassis|
The Toyota Corona (Japanese: トヨタ・コロナ Toyota Korona) is an automobile manufactured by the Japanese automaker Toyota between 1957 and 2002. Traditionally, the competitor from Nissan was the Nissan Bluebird. The word "corona" is Latin for "crown", a reference to an earlier vehicle Toyota offered called the Toyota Crown. It was exclusive to Toyopet Store dealership channels in Japan, while the larger Crown was available only at Toyota Store locations.
In many countries, the Corona was one of Toyota's first international exports, and was shortly joined by the smaller Toyota Corolla, providing buyers with a choice of a larger car, with similar operating expenses to the smaller Corolla. The Corona was Toyota's second sedan in their hierarchy of products, just below the Crown, until 1968 when the Corona name was used on a larger, all new platform called the Toyota Corona Mark II, which gave buyers more interior space while still offering dependable, affordable performance.
The Corona became successful in export markets and was marketed under a number of different nameplates worldwide—including those branded in much of Asia as Coronas marketed in European markets as Carinas.
- 1 First generation (T10; 1957–1960)
- 2 Second generation (T20, T30; 1960–1964)
- 3 Third generation (T40, T50; 1964–1970)
- 4 Fourth generation (T80, T90; 1970–1973)
- 5 Fifth generation (T100, T110, T120; 1973–1979)
- 6 Sixth generation (T130; 1978–1983)
- 7 Seventh generation
- 8 Eighth generation (T170; 1987–1992)
- 9 Ninth generation (T190; 1992–1998)
- 10 Tenth generation
- 11 References
- 12 External links
First generation (T10; 1957–1960)
|First generation (T10)|
|Also called||Toyopet Corona|
|Assembly||Japan: Toyota, Aichi (Honsha plant)|
|Body and chassis|
|Transmission||3-speed manual transmission|
|Wheelbase||2,400 mm (94.5 in)|
|Length||3,912 mm (154 in)|
|Width||1,471 mm (57.9 in)|
|Height||1,519 mm (59.8 in)|
|Curb weight||960 kg (2,120 lb)|
The first-generation Corona, introduced in May 1957, was designed with parts from the previous-generation Crown and Master following a major restyle and enlargement of the Crown. The design of many of the body panels were cut down from the Master which had ceased production. Aside from the four-door sedan, the ST16/PT16 van versions were also available. Originally, the ST10/16 Corona was fitted with the old sidevalve "S" engine, with 33 PS (24 kW). In April 1958 the Corona underwent a light facelift, with a new hood ornament and door handles. The tail light design of this generation is reminiscent of the 1949 Ford sedan.
The 997 cc (60.8 cu in) OHV P series engine replaced the old S in September 1959, and offered substantially more power with 45 PS (33 kW) at 5,000 rpm. The P-engined Corona sedan was capable of traveling at 105 km/h (65 mph). The car also underwent another facelift, including a mesh grille and a new rear seat which allowed seating for five rather than the previous four. As regulations regarding taxis at the time required engines no larger than 910 cc (56 cu in), dealers restricted the power for taxi vehicles. Due to the upgrade in dimensions of the Crown, Toyota needed to continue manufacturing a vehicle with similar size dimensions to the first Crown, primarily to be used for taxi usage. This vehicle saw the introduction of a monocoque chassis structure, and an independent front suspension using double wishbones. Due to the monocoque chassis, Toyota was able to produce a vehicle under 1,000 kg (2,200 lb).
Second generation (T20, T30; 1960–1964)
|Second generation (T20/T30)|
|Body and chassis|
|Wheelbase||2,400 mm (94 in)|
|Length||3,990 mm (157 in)|
|Width||1,490 mm (59 in)|
|Height||1,440 mm (57 in)|
|Curb weight||Sedan: 940–980 kg (2,070–2,160 lb)|
This generation of the Corona was also known as the Tiara, when exported by Toyota Motor Corporation. It was introduced at a critical time for the company in North America. Their first flagship car, the Toyopet Crown, was unsuccessful in the US market, and the Corona was added to offer a choice along with the Land Cruiser. At the time, there was little market for an off-road vehicle like the Land Cruiser. The front mask of the T20 Corona is reminiscent of the 1955–1957 Ford Thunderbird, and shares its appearance with the entry-level offering, called the Toyota Publica.
The Tiara was introduced to sell alongside the Crown, as a smaller companion. Introduced in March 1960, the car was powered by a 45 PS (33 kW) 1.0 L "P" series motor. With a three-speed manual transmission, top speed was a mere 110 km/h (68 mph). In March 1961, Toyota introduced a more powerful 1.5-litre "R" series motor, the same motor from the Crown, and an even larger 1.9-litre engine was added in 1964. Fortunately for Toyota, the problems with the Crown were not seen on the Tiara as the lighter body (180 kg or 400 lb less than the Crown) made the R series engine more sufficient. The Tiara station wagon was seemingly aimed at women, with many of the original brochures featuring only women in a dinner dress as well as playing golf. Nevertheless, it sold better than the Crown and had a lot fewer mechanical problems. The Tiara ended up being the only sedan sold by Toyota in the USA until the reworked second-generation Crown appeared. By that time, the Tiara had been redesigned and given the Corona label from the Japanese domestic market. A total of only 318 of these vehicles were sold in the US.
Two concept cars were shown at the 1963 Tokyo Motor Show – the Corona 1500S Convertible and the Corona 1900S Sporty Sedan. The Corona Sports Coupe was a concept car shown at the 1963 Tokyo Motor Show – it shared little with the Corona except the suspension and the name. Load carrying abilities of the newly introduced Coronaline (which was technically a coupé utility) were shared with the heavier capacity Toyota Stout.
Third generation (T40, T50; 1964–1970)
|Third generation (T40/T50)|
|Also called||Toyopet Corona|
|Body and chassis|
|Wheelbase||2,420 mm (95.3 in)|
|Length||4,110 mm (161.8 in)|
|Width||1,550 mm (61.0 in)|
The third generation was introduced September 1964, one month before the 1964 Summer Olympics. It was available in sedan, two-door hardtop, three-door van, five-door station wagon (also as a van), two coupé utility variants and a five-door hatchback. Italian designer Battista Farina assisted in the styling of the new Corona. The 40–43 series were reserved for sedans, while commercial vehicles (and wagons) were in the 46 and 47 series. Hardtops received 50–55 series model codes, while 56 was reserved for the five-door hatchback.
A public demonstration of the new Corona's performance was done on the Meishin Expressway, where the new model was tested to 100,000 kilometres (62,137.1 mi), and was able to sustain speeds of 140 km/h (87 mph). The Corona was released one year after the debut of the Corona's traditional competitor, the Nissan Bluebird. Toyota introduced a smaller vehicle to address the market that needed a more fuel efficient vehicle, called the Toyota Corolla in November 1966. This allowed the Corona to increase in size and offer more passenger and cargo room over previous generations. 0–97 km/h (0–60 mph) time was 15.1 seconds.
Originally, commercial models (three-door van, coupé utility, and double-cab coupé utility) utilized the 1,198 cc 2P engine, with 55 PS (40 kW) at 5,000 rpm. This allowed for a maximum load of 500 kg (1,102 lb) for the two-seater versions and 300 kg (661 lb) for the five-seaters. Heavier loads were better accommodated by the Toyota Stout, while larger commercial grade trucks became available at Toyota Diesel Store locations. 1967 also saw the debut of a cab over van equipped for both commercial and commuting duties using the Corona engines, called the Toyota HiAce, offering more payload than the Corona was suited for.
Top speed for the 1.2-litre Corona is 110 km/h (68 mph). In January 1967 this also became available as a five-door van. In May 1967, the larger and more powerful 3P (1.35-litre) and 2R (1.5-litre) engines became available, replacing the lesser 2P in most markets. Power of these were 77 and 65 PS (57 and 48 kW) respectively.
The Toyota automatic transmission, marketed as Toyoglide, was introduced on this version of the Corona. The 4R (12R in Australian versions) engine that had a displacement of 1587 cc was equipped with a twin SU carburetor (Australian models with 12R engine had one double barrel Aisin downdraft carburetor), and was capable of 90 bhp (67 kW; 91 PS). Disc brakes were also introduced for the front wheels. Exports of this Corona proved popular in the US and Europe, with increased engine performance and durability improvements over previous versions. In September 1967 alone, Toyota produced 80,000 cars, with 30,000 being Coronas.
In 1967 in Japan, the 1,587 cc DOHC 9R engine was available in the RT55 1600GT 2-door coupe. This engine was essentially the 4R engine with a new twincam head based on the same technology as the twincam engine in the 2000GT.
The Corona was the first Toyota assembled in New Zealand, from February 1967 at Steel Brothers' Motor Assemblies in Christchurch. It was also built by Shinjin Motor in South Korea from 1966 until 1972. Shinjin Motor was a predecessor to Daewoo and soon switched to assembling General Motors products. The Corona was also assembled by Australian Motor Industries in Melbourne, with the 12R engine.
South African assemblies commenced in 1966, with the car reaching a fifteenth position on the 1967 sales charts.
Corona Mark II (T60, T70; 1968–1972)
September 1968 saw the release of a larger model called the Corona Mark II. It was a slightly larger vehicle than the Corona with a higher level of equipment offered at the time, sharing some of the features of the larger Crown, but taking the top position at Toyopet Store locations.
The Corona Mark II is longer, at 4,295 mm (169.1 in) over the Corona's length of 162.4 in (4,125 mm) for the sedan, and the coupe, with a width of 1,610 mm (63.4 in) in comparison to 61 in (1,549 mm) for the sedan and coupe. The height of the Mark II is lower at 1,405 mm (55.3 in) over 1,420 mm (55.9 in) for the sedan, but higher at 1,374 mm (54.1 in) for the coupé.
After 1972, this was spun off as a separate platform.
Fourth generation (T80, T90; 1970–1973)
|Fourth generation (T80/T90)|
Toyopet Corona (RT81) 1700 sedan (Japan)
|Production||Feb 1970 – July 1973|
|Body and chassis|
|Wheelbase||2,430 mm (95.7 in)|
|Width||1,570 mm (61.8 in)|
The T80 series Corona was introduced February 1970 and was a complete redesign, and was developed on a separate platform from the Toyota Corona Mark II, which became a larger, more comfortable and powerful car, where the Corona remained focused on fuel economy. Body styles were further reduced to a two-door hardtop coupé, a four-door sedan and station wagon. The engine continued to use an OHV on base level vehicles, and SOHC on better equipped versions and most of the two-door coupés. The engines used in the Mark II were often shared with the Corona.
Trim levels originally offered were the 1500 standard or DX, 1600 DX, and the 1600 SL (although the 1900 cc 8R engine was offered in North America and South Africa). The 1.5 offered 77 PS (57 kW), while the 1.6 has 85 or 100 PS (63 or 74 kW) depending on the spec. A slight change occurred in January 1971, when the 2R and 7R engines (RT80/82/86V) were replaced by the more powerful 12R and 6R units (RT81/84/87V). At the same time, the larger 1.9-litre RT83 was added to the lineup. A plethora of transmissions were offered, with a three-speed manual as standard. A four-speed manual with a floor-mounted lever was also available, as were two- or three-speed "Toyoglide" automatic transmissions, with the three-speed available with a floor-mounted shifter. Later on a five-speed manual was also made available in the sportier versions.
The Corona was redesigned in August 1971, with the low-mounted wraparound turn signals removed and a new grille. Another, milder yet restyle appeared in August 1972, including new grilles and hubcaps. The Hardtop gained a two-litre engine at this time. Among the mechanical updates were electronic fuel injection installed on the 18R-E with a SOHC engine design that appeared in the two-door coupé. The 18R-B had twin SU Carburetors, with an electronically controlled automatic transmission, labeled ECT. Four-cylinder engine choices were pushrod 1.35 (van Standard only), 1.5, and 1.6-litre engines, and overhead-cam 1.7, 1.9, and 2.0-litre gasoline units. Vans (wagons) were sold with 1.35 3P or 1.5-litre 2R engines for the first year, but the 1.5 was replaced by the 1.6-litre 12R engine in January 1971. The 1.7-litre 6R engine was added to the lineup in September 1970, and became available in the van in September 1971. North America only received the Corona wagon in July 1972 (and only for the 1973 model year), as the two-litre RT89.
A performance oriented in-house competitor called the Toyota Carina, close in size to the Corona and based on the Toyota Celica platform, was introduced in 1970. It was available at a different dealership sales channel called Toyota Store. This generation of Corona was available at dealerships called Toyopet Store. The Corona pick-up was no longer manufactured due to the introduction of the Hilux in 1969. Along with the August 1972 facelift, the Corona received the 2.0-litre engine which appeared in the 2000SL and the 2000SR with fuel injection. The 7R-engined RT82 was short-lived in Japan, only being available between February and September 1970, but in other markets it may have remained available until the introduction of the next Corona.
In the United States, the 1970s were probably the Corona's high point, helped by the fuel crises of 1973 and 1979. Competition for sales continued from the Nissan Bluebird, and from a new competitor from the Mazda RX-2 in 1971, with an introduction to the US in 1972.
These models were assembled in New Zealand (by Steel's) and Australia (Australian Motor Industries or AMI). NZ models initially had a 1.5-litre OHV engine and four-speed manual and then the 6R 1.7-litre OHC engine. After the first facelift (new nose and tail, square instead of round instrument housings) for 1972, the 6R engine was again used. The 1972 facelift (another new grille) saw two models – 1.6-litre OHV with three-speed column-shift manual and bench front seat and 1.7-litre four-speed floor shift manual and high-back buckets. This version was badged 1700SE.
Australian RT81s used the 1.6-litre OHV engine and four-speed manual. Local content was much higher than the NZ cars with local instruments and heater which meant, surprisingly for the climate, there were no centre air vents. The facelift AMI assembled model with the revised grille was released in November 1972, lasting to March 1974.
Toyota Corona 1600 Sedan (RT82), as assembled by AMI in Australia, 1972 to 1974
Fifth generation (T100, T110, T120; 1973–1979)
|Fifth generation (T100/T110/T120)|
1975 Toyota Corona SE sedan
|Also called||Toyota 2000 (UK market)|
|Production||Aug 1973—May 1979|
|Body and chassis|
|Wheelbase||2,500 mm (98.4 in)|
31 August 1973 saw the introduction of the Corona T100-Series, which continued to be built as a two-door or four-door sedans, a two-door hardtop coupé (T110 chassis codes) and as a four-door station wagon (marketed as a van for commercial use in Japan). Chassis codes 100–105 were reserved for sedans, with 106–109 for vans, the 110–115 was for the hardtop coupé while 116–119 was for the wagon versions. The 120-series model codes were used for late series face lifted models in the Japanese market fitted with the new emissions control TTC-C motors. The two-speed automatic was no longer offered. The face lift revised the hood and grille, and enlarged the tail lights. The station wagon featured optional wood panel body claddings. Engines were 1.6, 1.8 and 2.0-litre SOHC units. In North America, the 20R 2.2-litre engine was used.
The high-performance 2000GT Sedan and Hardtop Coupé with 18R-G twin cam engine were only offered in Japan. Yamaha supplied the alloy head for these high performance normally aspirated engines fitted with twin Mikuni-Solex 40 mm side-draft carburettors and a compression ratio of 9.7:1. Gearbox was a Porsche type syncro-mesh 5 speed P51 coupled to 4.1 F series limited slip differential, giving a claimed top speed of 200 km/h (125 mph).
North American models had longer bumpers (hiding recoverable bumper shocks) to meet local 5 mph (8.0 km/h) impact standards; they gained standard radial tires in 1975. Side door impact upgrades were installed in all doors. This series also saw the standard (on some models) Electro Sensor Panel which monitored fluid and bulb status. As with earlier Coronas, some models had a shifter mounted on the steering column. Sales of the Corona continued to grow as a result of the 1973 oil crisis. The two-door hardtop continued, with trim levels 1600GL, 1800SR and the 2000SR, with the coupé proving popular in the USA but more popular yet in Japan. The two-door sedan, meanwhile, sold well in the United States but very little in Japan, and this was the last Corona to be offered in this bodystyle.
The Corona saw new competitors in both Japan, Europe and the United States from the Honda Accord in 1976, and the Subaru DL in 1974. The advantage the Honda and Subaru had over the Corona was that both vehicles were front-wheel-drive, while the Corona was rear-wheel-drive. In response to the Japanese Governments passage of emission control regulations, Toyota introduced the Toyota TTC-V (Vortex) on the 80 PS (59 kW) 19R engine only, using an Exhaust gas recirculation implementation. In Japan, the 12R-U engine was designed to run on LPG for taxi usage, starting in October 1975. To meet new emissions regulations the 1.6-litre 12R engine was replaced by the more modern 2T-J in commercial models. The 18R-E engine with fuel injection that was used in the 2000SL and 2000SR discontinued production due to emission issues. In November 1975, the 1800 saw the removal of the twin carburetors due to emission regulations, which meant the discontinuation of the 1800SR coupé. June 1976 saw the installation of a catalyst system included with the TTC-C system.
January 1977 saw a minor appearance change to both the interior and exterior, with a revised grille and hood, as well as new headlight surrounds. The taillights were also modified; while still rectangular, they were less busy in appearance.
New Zealand assembly began with 1.6 OHV, three-speed manual column shift and bench front seat and 1.8-litre 16R OHC four-speed manual bucket front seat options. Later, the 18R 2.0-litre OHC engine replaced the 1.8 and was also offered with a three-speed automatic, the first auto Corona in New Zealand. Australian models had the 18R from the start, as did South African ones.
Sixth generation (T130; 1978–1983)
|Sixth generation (T130)|
|Body and chassis|
|Wheelbase||2,525 mm (99.4 in)|
|Width||1,655 mm (65.2 in)|
Introduced in Japan in September 1978, the T130 series Corona adopted a boxier design over the outgoing T100/110/120 series. It maintained the standard front-engine / rear-wheel-drive layout of all Coronas that preceded it. The T130 series was available in a wide range of body styles across various markets including a four-door Sedan, two-door hardtop coupe, four-door wagon and new five-door liftback, which featured a 40:60 split fold rear seat. The assignment of "T130" to all Corona body styles signified a new approach, instead of a different series number identifier for different body styles.
All models featured MacPherson strut independent front suspension as well as a four-link trailing arm rear suspension arrangement with a Panhard rod, except for the wagon, which used leaf springs, like the Corolla and Cressida wagons. Disc brakes were fitted as standard equipment on the front of all models. Rear disc brakes were fitted as standard on the 2000GT and 2000SL, which were not available to all international markets. Other models were fitted with rear drum brakes.
The T130 series was manufactured with a wide range of engine and transmission combinations. 1.6-litre 12R, 2T (and associated 12T) and 2.0-litre 18R engines are the most common. Amongst other minors change, the 1.8-litre 3T / 13T engine was added in 1981 to replace the 1.6-litre 2T / 12T. The North American Corona shared the 2.2-litre 20R engine with the Celica. Emission regulations passed in 1978 were applied across the range of models offered. The 1.8L engine was equipped with electronic fuel injection as well as the 2.0L engine. In Japan the venerable 2.0L 18R-G was offered in the range-topping 2000GT, developing 101 kW (135 hp) at 5800 rpm.
- United States
The T130 was the last Corona to be marketed in the USA. It was offered as a sedan, wagon, or liftback with either Base or LE (Luxury Edition) equipment. In North America, the Corona was replaced for the 1983 model year by the similarly sized but front-wheel-drive Camry sedan and five-door hatchback. Since then, the Camry has grown a size larger than the Corona and its sportier Carina sister car. The Corona was originally fitted with the 2.2-litre 20R engine, but along with a facelift for 1981 this was switched to the 2367 cc 22R with 96 hp (72 kW; 97 PS) at 4800 rpm. The facelift version received a rearward-sloping front end and a modestly restyled rear; North American cars received quad rectangular headlamps and a standard five-speed manual or an optional four-speed automatic.
Toyota Australia manufactured sedans and wagons using 1.9-litre Holden Starfire engines, badged in Toyota engine terminology as the 1X, coupled with a four-speed or optional five-speed Borg-Warner 505. Toyota Australia also imported four-door sedans and five-door liftbacks fitted with a 2.0-litre 18R engine for the upmarket range. In 1982 the XX (sedan only) was released featuring the 21R-C 2-litre motor, and although a smoother power plant than both the Holden-derived 1X, and well-regarded 18R, its oversquare design was underpowered and universally panned by Australian motoring journalists.
- New Zealand
New Zealand assembly started with the 1.6-litre 12R engine and three-speed manual transmission with bench front seat, and 1.8-litre 3T (TT132) with a four-speed manual or three-speed automatic. The 1.6-litre was soon changed to the newer 2T engine, coupled with a four-speed manual and bucket front seats. Later in the run, Toyota NZ added a locally assembled Liftback version with the 1.8-litre engine and manual or automatic transmission. These models also had a standard radio and separate cassette deck—both were rare factory fittings in the country at the time.
In Indonesia, the locally built T130 Corona was available as a 2000 (RT132) from 1979. From 1981 it became available as an 1800 (TT132). It was then replaced by the X60-series Toyota Corona Mark II. The Corona returned to Indonesia with the T150-series Corona FF.
Production of the T130 ended in 1982, to be replaced by the T140 series.
Rear-wheel drive (T140; 1982–1987)
|Seventh generation (T140)|
Pre-facelift Toyota Corona CS-X sedan (ST141, Australia)
|Body and chassis|
|Wheelbase||2,500 mm (98.4 in)|
|Length||4,570 mm (179.9 in)|
|Width||1,660 mm (65.4 in)|
|Height||1,415 mm (55.7 in)|
|Curb weight||1,165 kg (2,568 lb)|
The T140, which would become the longest running Corona series, entered production as a rear-wheel-drive sedan, coupé and wagon in January 1982. Manufacture by Toyota Australia continued until 1987, by which time the T150 series had already been released. The T140 series was also brought out in a diesel/LPG powered, high-roofed taxicab version which was particularly popular in Hong Kong, Macau, and Singapore. The T140 was not exported to many markets where the T130 had been sold (such as Indonesia), with many importers choosing to hold out for the front-wheel-drive T150.
Starting with this generation series, the Toyota Carina platform was altered from its original Toyota Celica beginnings to the Corona platform. The Corona remained exclusive to Japanese dealerships Toyopet Store, and the Carina continued to be sold new only at Toyota Store locations in conjunction to the larger Toyota Crown.
1600 Standard, DX, GL, SL 4dr sedan, 2dr hardtop, 4dr liftback coupé (standard only sedan) 88 hp (12T-U) rigid rear axle 4-speed gearbox (SL 5-speed) brakes: front disc, rear drum 1800 DX, GL, CX, LX, SL 4dr sedan, 2dr hardtop, 4dr liftback coupé 95 hp (13T-U) rigid rear axle 5-speed gearbox brakes: front disc, rear drum 1800 EFI SL, EFI SX 4dr sedan, 2dr hardtop, 4dr liftback coupé 105 hp (3T-EU) rigid rear axle with anti-roll bar 5-speed gearbox brakes: front disc, rear disc 2000 CX 4dr sedan, 2dr hardtop, 4dr liftback coupe 105 hp (21R-U) rigid rear axle with anti-roll bar 5-speed gearbox brakes: front disc, rear disc 2000 GT II, GT 4dr sedan, 2dr hardtop, 4dr liftback coupé 135 hp (18R-GEU) rigid rear axle with anti-roll bar 5-speed gearbox brakes: front disc, rear disc
- 1983 onwards
Standard, DX, GX 4dr sedans 83 hp (3A-U) GX, EX 4dr sedan/2dr hardtop 100 hp (1S-U) GT 4dr sedan/2dr hardtop 130 hp (4A-GE) GT-T, GT-TR 4dr sedan/2dr hardtop 160 hp (3T-GTEU)
For the Japanese market only, the five-door wagon (called "Van") was available with a 1.5-litre 5K-J petrol engine, a 1.6-litre 12T-J petrol engine or a 1.8-litre 1C diesel engine. The petrol engines had either a 4-speed manual or a 3-speed automatic gearbox but the diesel engine had a 5-speed manual gearbox. Some wagons had five doors but no rear seat.
European export versions received the 2T four-cylinder, with 75 PS (55 kW) DIN. There was also an 86 PS (63 kW) 1.8-litre engine, as well as the 1.8-litre 1C diesel unit, with a claimed 58 PS (43 kW) DIN. The T140 Corona was not exported in large numbers to Europe, as most importers focused on the slightly smaller Carina and then the front-wheel-drive T150-series cars.
After the late 1985 introduction of the T160 Corona coupe, the rear-wheel-drive coupé was discontinued. The sedan range was gradually whittled down and by May 1986 only the 1.5 and 1.8 (3A-U, 1S-U) remained, along with a 1.5 Van (KT147V) and a 1.8 Diesel Van. These continued to be available until the December 1987 introduction of the T170-series Corona.
For the Australian market, there were two models sold between 1983 and 1987: the ST141 with a 2.0-litre 2S-C and from 1984, the RT142, fitted with a 2.4-litre fuel-injected 22R-E. Both models were available in either sedan or wagon body styles. The lower S and CS trim levels (2.0-litre) were fitted standard with a four-speed manual transmission (optional five-speed manual and three- or four-speed automatic). The top trim level was the 2.0-litre CS-X until November 1984 when replaced by the 2.4-litre CSi and luxury Avante models (2.0- and 2.4-litre).
Toyota released a limited edition Olympic model in 1984, offering a full digital instrument cluster in either manual or automatic and in both sedan and wagon body variants. In 1985, a limited edition SR model was offered in white and manual transmission only with front and rear spoilers, white painted grille and side mirrors, white highlights in the tail lamps (instead of black), SR lettering on the boot lid, red exterior pinstriping, sports front seats with red pin stripes, and a three-spoke leather steering wheel.
Toyota Australia introduced a facelift in November 1985. This included the addition the former CS-X grille insert for the S model and the Avante grille for the CS and CSi. There were also new wheels trims on all versions and revised tail lamp lenses. The pre-facelift models can be identified by tail lamps with dual black horizontal lines engraved along the base. The facelift models received lenses with a single, more subtle, horizontal line intersecting across the centre of the tail lights and a chrome strip at the base. Facelift CS and CSi wagons received a horizontal strip across the tailgate and additional black plastic mouldings surrounding the license plate.
The special-bodied taxi version was a spinoff of the T140, used specially as taxicabs in Costa Rica, Hong Kong, Japan, Macau, Panama and Singapore. It was first introduced with the 1.8-litre 1C diesel engine in January 1982 (CT140). In September a 1.8-litre LPG version (YT140) was added to the lineup. In addition to getting a new rear end and a taller, more upright roof line for a more comfortable rear seat, alterations were also made to the headlights and grille. While based on the T140, the front and rear sections took their design cues from the A60 Carina. In December 1986 the car underwent a light facelift, and the diesel option was upgraded to the 2-litre 2C version (CT141).
The car was not generally sold for private use. After November 1991, the diesel option was no longer available for the Japanese market but was still available for export (e.g. Macau). Production only came to an end in April 1998, generally being replaced by the S150-series Crown (later renamed Comfort). This marked the end of the Corona taxi line. Most 140/141-series Corona taxis have been long replaced with newer vehicles; it did remain in common use for a long time in both Macau and Pakistan.
Front-wheel drive (T150; 1983–1987)
|Seventh generation (T150)|
1985 Toyota Corona (Japan).
|Also called||Toyota Carina II (Europe)|
|Production||Jan 1983 – Dec 1987|
|Body and chassis|
|Length||4,360–4,390 mm (171.7–172.8 in)|
|Width||1,670 mm (65.7 in)|
|Height||1,365 mm (53.7 in)|
|Curb weight||1,005 kg (2,215.6 lb)|
The T150 Corona was known as the Corona FF, selling alongside the more traditional and recently facelifted rear-wheel-drive Corona (T140-series). Essentially a shortened version of the Camry, this was part of Toyota's very cautious approach to introducing front-wheel-drive vehicles. Toyota returned to a platform naming tradition, assigned to different body styles this generation was made available, abandoned in 1978. The Corona FF as introduced in January 1983 was only available with a five-door liftback body style, and only with the carburetted 100 PS (74 kW) 1.8-litre 1S-LU inline-four. In October 1983 a more traditional four-door sedan was added, and the T150 gradually became the main part of the Corona lineup as the T140-series shrank in importance.
Along with the new bodystyle, more engines were also added: a smaller 1.5-litre 3A-LU at the bottom, while the 1.8 was now available with fuel injection (1S-ELU) and 115 PS (85 kW). There was also a two-litre diesel (2C-L) and the carburetted 1.8 was replaced by the central point injected 1S-iLU, with an extra five horsepower. In 1984, this chassis was also used as the basis for a new, front-wheel-drive version of the Carina sedan.
In August 1985 the Corona underwent a small change, largely consisting of new, bigger taillights. Also new was the related Celica and Carina range. With a more sporting chassis and five-lug wheels (rather than four), this received the new T160 chassis code. This chassis, as well as the twin-cam two-litre 3S-GELU engine with 160 PS (118 kW) (JIS) at 6400 rpm was used for the new Corona 2.0 GT and GT-R versions. A sporting 1.8 SX-R version (1S-ELU) of the 160-series sedan was also added in late 1985.
- Export markets
The Corona hatchback was eventually dropped in Australia in 1983 in favour of the larger Camry and the previous-generation saloon and estate were dropped in 1987 to be replaced by the Toyota Camry#V20, but in New Zealand, Toyota continued to offer the Corona, assembled locally at Toyota's plant in Thames, New Zealand. Initially, the T150 Corona was launched in New Zealand in 1983 as a hatchback only, to complement the previous generation T140 Corona saloon and estate which continued to be sold in the New Zealand market as in Australia. However, the T140 saloon was dropped in 1985 and the T150 Corona saloon was then launched to replace it. With suspension fettled by racer Chris Amon, the New Zealand Coronas had carburetted 1.8s or a fuel-injected 2-litre engine. Later, Toyota New Zealand followed Australia's lead and eventually dropped the Corona in 1996, instead marketing the Australian-built Camry as its offering in the mid-size segment of the market.
Export-market Coronas were generally fitted with the 1.6-litre 4A engine, but in many markets (New Zealand, Southeast Asia, Latin America) the T150 Corona was also available with 2.0-litre engines. In Southeast Asia, the 1.6 EX-Saloon with no emissions gear (4A-L) produces 79 PS (58 kW) at 5600 rpm. In Indonesia, the original T150 was sold as the Corona GL and after the 1985 facelift it became the Corona EX-Saloon (AT151).
Toyota's large family car lineup in Europe was quite confusing when looking over the past 25 years. The 1970 through 1983 Carina sister models had been sold in most of Europe, but in 1984 they were replaced with the "Carina II" – which was really the 1983 model Corona as sold in Japan with alterations to the headlights, grille and trim (the Carina in Japan at that time was a similar but boxier vehicle.)
Corona Coupé (T160; 1985–1989)
When the Celica was realigned from its former Toyota "A-series" RWD platform to share the Corona "T-series" FWD platform, the Celica notchback was rebranded as the Corona Coupé in Japan, which was identical to the internationally available Celica version with the only difference being the removal of the retractable headlights in favour of conventional fixed items. This replaced the rear-wheel-drive T140 Corona Coupé, leaving only a few vans and sedans in the RWD Corona lineup. The T160-series cars have a somewhat longer wheelbase as well as a wider track (front and rear) than the Celica version available elsewhere in the world. The Corona Coupé remained exclusive to Toyopet Store Japanese dealerships along with the larger, all new Toyota Soarer, while the Celica liftback and convertible remained at Toyota Corolla Store locations. The Corona Coupé was manufactured from 1985 until 1989. In 1994 it was belatedly replaced by the Toyota Curren and sold at Toyota Vista Store locations.
The Corona Coupé came with three engines; the SOHC 1.8-litre 1S-iLU and two twin-cams, the 1.6-litre 4A-GELU or the 2-litre 3S-GELU. Chassis codes are ST160, AT160, and ST162. In May 1988 the 1.8-litre engine was replaced by the twin-cam 4S-FiLU.
Eighth generation (T170; 1987–1992)
|Eighth generation (T170)|
|Also called||Toyota Carina II (Europe)|
|Body and chassis|
|Width||1,690 mm (66.5 in)|
|Height||1,370 mm (53.9 in)|
|Curb weight||1,130 kg (2,491.2 lb)|
The Corona and the Toyota Carina continued to increase in size as its popularity grew. Because of Japanese taxation laws, both models got to the maximum 1,700 mm (66.9 in) permitted for a lower tax bracket, and in the 1980s and early 1990s, the cars were the same size. The previous generation ST160 Corona Coupé did not update with this generation, and was not replaced until 1993, when it was renamed as the Toyota Curren. For this generation, the new Corona EXiV four-door hardtop would have to do for those looking for something extra. This was the last generation to offer the Corona GT to Japanese buyers, equipped with Toyota's active suspension technology called TEMS included with their "PEGASUS"-branded four-wheel independent suspension and "LASRE"-branded multi-port fuel injection technology on the 3S-GELU engine.
The five-door Corona liftback was sold as the "Corona SF" in Japan, in a much smaller lineup than the four-door sedan. The five-door model proved much more popular in Europe, where, confusingly, it was marketed as the Carina II. The sedan and a wagon were also part of the Carina II lineup, which was a rebadged Corona rather than the T170 Carina sold in Japan. The lightly restyled Carina T170 series derivative was launched in Japan in December 1987.
A limited production Corona was sold only in Japan in May 1990, to celebrate 10 million Corona's having been sold, called the Corona Super Roomy. It added 210 mm (8.3 in) to the wheelbase, and was limited to 500 units.
Corona EXiV (T180)
The T180 series Corona was introduced as the Toyota Corona EXiV which was shared with a Carina twin, called the Toyota Carina ED. According to Toyota, the letters EXiV derived from the words EXtra impressiVe. The Corona EXiV followed from the successes of the Corona Coupé, by introducing a sleek appearance of a low-slung coupé, while adding two more doors, in the tradition of a four-door coupé. Built on the same version of the Corona chassis as that used for the Celica, this was a continuation of the sporting T160 series Corona although it now received its own bodywork.
Ninth generation (T190; 1992–1998)
|Ninth generation (T190)|
Pre-facelift Carina E DXL (United Kingdom)
|Body and chassis|
|Wheelbase||2,580 mm (101.6 in)|
|Length||4,520 mm (178.0 in)|
|Width||1,695 mm (66.7 in)|
|Height||1,410 mm (55.5 in)|
|Curb weight||1,200 kg (2,645.5 lb)|
Introduced in March 1992, the new Corona made its European debut at Geneva Auto Show. In Europe, the Corona was known as the Toyota Carina E and it replaced the Carina II (T170). The Carina E was built at Toyota's new factory at Burnaston, near Derby, England, United Kingdom, but the early cars and all GT-i models were built in Tsutsumi, Japan. The cars were imported in Europe from the third quarter of 1992 until the opening of the Burnaston factory in December that year.
For the Japanese domestic market, the Corona's platform twin the Carina received different bodywork.
This generation of Corona received a redesign to be larger, heavier, and have the completely rounded, aerodynamic shape of the 1990s. The exterior dimensions and engine sizes remained in compliance with Japanese size regulations so as to continue to offer a product for Japanese buyers wanting to reduce their annual tax liability.
The five-door model was called the Corona SF in Japan, while the station wagon had become a separate line there, from 1993, called the Toyota Caldina.
The T190 is the last Corona for most export markets. It was marketed as Corona "Absolute" in Indonesia, or Corona Exsior in the Philippines, Taiwan and Thailand.
In mainland Europe, the Carina E was offered in XL and GL trim levels, but in the UK they were marketed as Xi (1.6-litre), XLi (1.6, 1.8-litre), SLi (1.8-litre), GLi (1.6, 1.8, 2.0-litre), GTi (2.0-litre, no estate) and Executive (2.0-litre, no estate) between 1992 and 1996. Diesels were available as the 2.0-litre XLD and GLD trims. From 1996, the S (1.6-litre, hatchback only), GS (1.6, 1.8-litre), CD (1.6, 1.8, 2.0-litre), and CDX (1.8, 2.0-litre) trims replaced the previous trim level scheme. Diesels were now the 2.0-litre GS and GL trims. The high performance GT-i with 3S-GE engine was offered in small numbers in certain European countries. All versions (apart from GTi/Executive) were available as a four-door saloon, five-door hatchback or five-door estate car. Badged as a Carina, this was the 1993 Semperit Irish Car of the Year.
It was also sold in New Zealand, but not in Australia. Engines were the same as the Toyota Carina E, except there was no diesel variant. The station wagon variant was a badge-engineered Toyota Caldina. The sedans and liftbacks were assembled in Thames, New Zealand, while the wagon was imported fully built up from Japan. The locally assembled cars also received special spring and damper combinations (again developed by racer Chris Amon) as well as some other changes.
In the Philippines, the Corona was only available with the 2.0-litre 3S-FE engine throughout its production from 1993 to 1998. Early examples of the Corona T190 (ST191) looks similar to the 1992 Japanese spec model. It only has the 2.0 EX Saloon variant, with a choice of a 5-speed manual or a 4-speed automatic transmission. The 1995 model has the facelifted exterior, having the front and rear bumpers with the black trim, and the standard three-piece rear spoiler. The Exsior was introduced in 1996, this time with extended bumpers and red/amber tail lights and garnish. Another variant of the Corona Exsior was the LE, which had genuine leather seats, faux dash wood panel, and electronic air purifier/ionizer as standard equipment. It was eventually replaced in 1998 with the Toyota Camry XV20.
Production in Japan ended in 1995, but in Europe and Southeast Asia it lasted until the end of 1997, when it was replaced by the Avensis, which was also built at Burnaston.
Corona EXiV (T200)
The T200 series Corona was sold as the continuation of the Toyota Corona EXiV hardtop sedan, while the Corona Coupé's successor was relocated to Toyota Vista Store locations and reintroduced as the Toyota Curren.
The first Toyota Caldina was the five-door wagon or commercial van version of the four-door sedan Toyota Corona in Japan. The wagon has independent strut rear suspension while the commercial wagon has semi-independent leaf springs. The wagon was given its own identity, whereas previous station wagon versions were named Corona wagons. The Caldina was introduced as a successor to the Corona and Carina wagons, and was sold at Toyota Japanese dealerships Toyota Store and Toyopet Store locations. The Caldina was introduced after the Subaru Legacy wagon and the Nissan Avenir wagon.
Corona Premio (T210; 1996–2001)
|Tenth generation (T210)|
Corona Premio (Japan; pre-facelift)
|Body and chassis|
|Body style||4-door sedan|
|Wheelbase||2,580 mm (101.6 in)|
|Length||4,520 mm (178.0 in)|
|Width||1,695 mm (66.7 in)|
|Height||1,410 mm (55.5 in)|
|Curb weight||1,190 kg (2,623.5 lb)|
A final, tenth generation was built between 1996 and 2001 for the Japanese market, with one particular model called the Toyota Corona Premio that was spun off into an independent model called the Premio (coded ST210), with the Allion following after the Carina after 2001. The Corona Premio was offered as Base Premio, Premio E, and Premio G. Four-cylinder engine choices are 1.6-litre 4A-FE, 1.8-litre lean burn 7A-FE, and 2.0-litre 3S-FE. Diesel engines offered were 2.0-litre 2C-T and later on replaced by more economical 2.2-litre 3C-T. This is the last model using Corona name in Japan. The automatic model of the Corona Premio came with three selectable driving modes for its electronically controlled transmission: Normal, ECT PWR (power mode), and ECT MANU (manual mode).
The 4WD models are coded ST215, and are offered as Active Sports GT with the 3S-GE engine. The top of the line GT-T came with the turbocharged 260 PS (191 kW; 256 hp) 4th generation 3S-GTE engine, and included an all-wheel-drive system similar to the Toyota Celica GT-Four. The GT-T also came with optional electronic stability control(VSC) (standard on Active Sports versions). The Aerial version features a large sunroof and contoured roof racks as standard. Weighing 1,470 kg (3,241 lb), the Caldina GT-T offers similar performance to a Subaru WRX wagon achieving 0–100 km/h in 7 seconds. A refresh was given in 2000 with new bumpers and lamps a refreshed interior and extra lug added to the turbo manifold to stop the warping issue common on earlier GT-T models.
Engines for lesser models are the 1.8 L 7A-FE, the 2.0 L gasoline 3S-FE, and the 2.2 L diesel 3C-TE.
South America (T220; 1997–2002)
For the subsequent model series, the T220, the Corona name was dropped. It was built as sedan, liftback and wagon. Only the wagon was sold in Japan as the Caldina built on the T210 platform. The sedan and liftback were mainly sold in Europe as Avensis, and the lower grade model for taxi called Corona. Four-cylinder engines for the Avensis is 1.6, 1.8, 2.0 gasoline, and diesel. The Corona Taxi has turbo diesel. In South America, the Avensis is renamed Corona and powered by 2.0-litre 3S-FE engine. This is the last Corona, and the third-generation Caldina was built on the new T240 platform, which was also used in the Allion and Premio.
- Mondale, Walter; Weston, Mark (2002). Giants of Japan: The Lives of Japan's Most Influential Men and Women. New York City: Kodansha America. p. 63. ISBN 1-56836-324-9.
Since then many Toyota models have taken up the 'Crown' theme. 'Corona,' for example, is Latin for crown. 'Corolla' is Latin for small crown.
- Ruiz, Marco (1986). 'The Complete History of the Japanese Car: 1907 to the Present. Rome: ERVIN srl. p. 174. ISBN 0-517-61777-3.
- Toyopet Coronaline, www.toyota-global.com Retrieved 14 June 2017
- "The Advance of Knockdown Exports". Toyota. Retrieved 22 September 2014.
- Car Graphic: Car Archives Vol. 1, '60s Japanese/American Cars (in Japanese). Tokyo: Nigensha. 2000. p. 8. ISBN 4-544-09171-3.
- "Overview of Overseas Production Affiliates: Oceania". Toyota Motor Corporation. 2012. Retrieved 11 July 2014.
- Toyota Australia:History. Retrieved 9 July 2011
- Toyota Vehicle Identification Manual. Japan: Toyota Motor Corporation – Overseas Parts Department. 1984. Catalog No.97913-84.
- "GM-Daewoo Auto – 40 turbulent years" (in Korean). November 2001. Retrieved 8 March 2010.
- "SteelBro history". 2007. Retrieved 8 March 2010.
- "Used Car Test: 1966 Toyota Corona Estate". Autocar. 129. No. 3, 795. 7 November 1968. pp. 29–31.
- Hajek, Alexander. "Toyota Corona T4/T5". Toyotaoldies.de. Retrieved 13 January 2012.
- Markovich, Alexander (January 1967). "The Toyota Corona". Popular Mechanics. pp. 38–41.
- "Affiliates (Toyota wholly-owned subsidiaries)-Toyota Motor East Japan, Inc". Toyota Motor Corporation. 2012. Retrieved 21 July 2014.
- Toyopet Corona Commercials, Toyota Motor Co, 1965
- Toyota Commercial Cars (Catalog), Toyota, 1969, p. 3
- Toyota 1600GT – Model RT55 Parts Catalog (in Japanese). Toyota. 1967. No. 53292-67.
- Toyota Twin Cam. Toyota.
- Wright, Cedric (August 1968). "Toyota Range of Cars". CAR. Vol. 12 no. 7. Cape Town, South Africa: Central News Agency Ltd. p. 23.
- ニューコロナ [New Corona] (in Japanese), Toyota Motor Company, February 1970, p. 8, 21041. 4502
- Toyota Vehicle Identification Manual, Japan: Toyota Motor Company, 1979, pp. 56-57, 97911-79
- Hajek, Alexander. "Toyota Corona T8/T9". Toyota Oldies.
- Toyopet Corona RT80, 90 (parts catalog) (in Japanese), Japan: Toyota, June 1978, pp. 2–4, 52229-78
- Graham Robson, A-Z of Cars of the 1970s, 1990, p. 155
- Toyota Corona brochure, No.121243-5210, 1977, Japan
- Wright, Cedric, ed. (September 1978). "Toyota Corona SL 2000 sports sedan". CAR. Vol. 22 no. 8. Cape Town, South Africa: Ramsay, Son & Parker (Pty) ltd. p. 54.
- Corona T130 Parts Catalog (Japanese Market), Toyota Motor Corporation, Japan
- Braunschweig, Robert; Büschi, Hans-Ulrich, eds. (6 March 1980). "Automobil Revue '80". 75. Berne, Switzerland: Hallwag, AG: 503–504. Cite journal requires
- Hogg, Tony (ed.). "1981 Buyer's Guide". Road & Track's Road Test Annual & Buyer's Guide 1981. No. January–February 1981. CBS Publications. p. 121.
- RH (23 November 1981). "Laporan test: Corona Mark II" [Test report]. Mobil & Motor (in Indonesian). Vol. 11 no. 10. PT Informedia Indonesia. p. 7. ISSN 0047-7591.
- Büschi, Hans-Ulrich, ed. (10 March 1983). "Automobil Revue '83" (in German and French). 78. Berne, Switzerland: Hallwag, AG: 524–526. ISBN 3-444-06065-3. Cite journal requires
- List of RT140 Coronas sold in Japan. Toyota Motor Co., No. 261150
- Van Scheppingen, Art (2 October 2010). "Carina sightings: Corona CT141 taxi at JCCA NYM 2010". banpei.net.
- Yamaguchi, Jack K. (1984). Lösch, Annamaria (ed.). Technology on Full Boost. World Cars 1984. Pelham, NY: L'Editrice dell'Automobile LEA/Herald Books. p. 66. ISBN 0-910714-16-9.
- "Technical Development Electronics Parts". Toyota GLobal. Toyota Motor Company. Retrieved 18 January 2015.
- World Cars 1985. Pelham, NY: The Automobile Club of Italy/Herald Books. 1985. p. 393. ISBN 0-910714-17-7.
- Büschi, Hans-Ulrich, ed. (5 March 1987). Automobil Revue 1987 (in German and French). 82. Berne, Switzerland: Hallwag AG. p. 544. ISBN 3-444-00458-3.
- Corona (brochure), New Zealand: Toyota New Zealand Limited, May 1986, p. 11, SB004
- Toyota Corona (brochure) (in Indonesian), Jakarta, Indonesia: P.T. Toyota-Astra Motor, November 1985, p. 10
- Automobil Revue 1987, p. 545
- "Archived copy". Archived from the original on 19 February 2014. Retrieved 17 October 2012. Cite uses deprecated parameter
|deadurl=(help)CS1 maint: archived copy as title (link)
- 別冊CG: 自動車アーカイヴ 80年代の日本 [Car Graphic: Car Archives Vol. 11, '80s Japanese Cars] (in Japanese). Tokyo: Nigensha. 2007. pp. 43–44. ISBN 978-4-544-91018-6.
- "Company's Milestone". Kuozui Motors, Ltd. Archived from the original on 20 June 2005. Retrieved 13 June 2016. Cite uses deprecated parameter
- "75 Years of Toytoa". Toyota.com.
- Anderson, Donn, ed. (March 1993). "Newsline: New Corona Station Wagon". New Zealand Car. Vol. 7 no. 5. Auckland: Accent Publishing. p. 13. ISSN 0113-0196.
- "國瑞汽車股份有限公司 KUOZUI MOTORS, LTD". Kuozui.com.tw. Retrieved 19 August 2011.
- "JSpec Imports model lineup". j-spec.com.au. Archived from the original on 6 July 2011. Retrieved 10 December 2010. Cite uses deprecated parameter
|Look up corona in Wiktionary, the free dictionary.|
|Wikimedia Commons has media related to Toyota Corona.|
|Subcompact||Publica P10||Publica P20||Publica, Toyota 1000 P30|
|Publica Starlet P40||Starlet P60||Starlet P70|
|Tercel, Corsa L10||Tercel, Corolla II, Corsa|
|Sprinter Carib L20|
|Compact||Corolla, Sprinter E10||Corolla, Sprinter E20||Corolla E30/50, Sprinter E40/60||Corolla, Sprinter E70||Corolla, Sprinter E80|
|Carina A10/30||Carina A40/50||Carina A60|
|Celica Camry A40/50|
|Mid-size||Master RR||Corona T10||Corona T20/30||Corona T40/50||Corona T80/90||Corona T100/110||Corona T130, Corona T120||Corona T140|
|Mark II T60/70||Mark II X10/20||Mark II, Cressida, Chaser X30/40||Mark II, Cressida, Chaser, Cresta X50/60||Mark II, Cressida, Chaser, Cresta X70|
|Full-size||Crown RS||Crown S20||Crown S30||Crown S40||Crown S50||Crown S60/70||Crown S80/100||Crown S110||Crown S120|
|Crown 8 G10||Century G20||Century G30||Century G35||Century G40|
|Sports car||S800 P15|
|Celica A20/30||Celica A40/50||Celica A60|
|Supra A40||Supra A60|
|Mid-size||Corona Mark II||Corona Mark II||Cressida|
|Tercel 4WD Wagon||Yaris Liftback|
|Mid-size||Cressida||Cressida||Cressida||Cressida||Camry Solara||Camry Solara|
|Sport compact||Corolla SR5/GT-S||Corolla SR5/GT-S||Paseo||Paseo||Paseo(C)|
|Sports car||Celica Supra||Celica Supra|