Rhombic triacontahedron

From Wikipedia, the free encyclopedia
  (Redirected from Triacontahedron)
Jump to: navigation, search
Rhombic triacontahedron
(Click here for rotating model)
Type Catalan solid
Coxeter diagram CDel node.pngCDel 5.pngCDel node f1.pngCDel 3.pngCDel node.png
Conway notation jD
Face type V3.5.3.5
DU24 facets.png

Faces 30
Edges 60
Vertices 32
Vertices by type 20{3}+12{5}
Symmetry group Ih, H3, [5,3], (*532)
Rotation group I, [5,3]+, (532)
Dihedral angle 144°
Properties convex, face-transitive isohedral, isotoxal, zonohedron
(dual polyhedron)
Rhombic triacontahedron Net

In geometry, the rhombic triacontahedron, sometimes simply called the triacontahedron as it is the most common thirty-faced polyhedron, is a convex polyhedron with 30 rhombic faces. It has 60 edges and 32 vertices of two types. It is a Catalan solid, and the dual polyhedron of the icosidodecahedron. It is a zonohedron.

A face of the rhombic triacontahedron. The lengths
of the diagonals are in the golden ratio.

The ratio of the long diagonal to the short diagonal of each face is exactly equal to the golden ratio, φ, so that the acute angles on each face measure 2 tan−1(1/φ) = tan−1(2), or approximately 63.43°. A rhombus so obtained is called a golden rhombus.

Being the dual of an Archimedean solid, the rhombic triacontahedron is face-transitive, meaning the symmetry group of the solid acts transitively on the set of faces. This means that for any two faces, A and B, there is a rotation or reflection of the solid that leaves it occupying the same region of space while moving face A to face B.

The rhombic triacontahedron is somewhat special in being one of the nine edge-transitive convex polyhedra, the others being the five Platonic solids, the cuboctahedron, the icosidodecahedron, and the rhombic dodecahedron.

The rhombic triacontahedron is also interesting in that its vertices include the arrangement of four Platonic solids. It contains ten tetrahedra, five cubes, an icosahedron and a dodecahedron. The centers of the faces contain five octahedra.


If the edge length of a rhombic triacontahedron is a, surface area, volume, the radius of an inscribed sphere (tangent to each of the rhombic triacontahedron's faces) and midradius, which touches the middle of each edge are:[1]

where φ is the golden ratio.

The plane of each face is perpendicular to the center of the rhombic triacontahedron, and is located at the same distance (short diagonals belong only to the edges of the inscribed regular dodecahedron, while long diagonals are included only in edges of the inscribed icosahedron). Using one of the three orthogonal golden rectangles drawn into the inscribed icosahedron we can easily deduce the distance between the center of the solid and the center of its rhombic face.


The rhombic triacontahedron can be dissected into 20 golden rhombohedra, 10 acute ones and 10 flat ones.[2]

Orthogonal projections[edit]

The rhombic triacontahedron has three symmetry positions, two centered on vertices, and one mid-edge. Embedded in projection "10" are the "fat" rhombus and "skinny" rhombus which tile together to produce the non-periodic tessellation often referred to as Penrose tiling.

Orthogonal projections
[2] [6] [10]
Image Dual dodecahedron t1 e.png Dual dodecahedron t1 A2.png Dual dodecahedron t1 H3.png
Dodecahedron t1 e.png Dodecahedron t1 A2.png Dodecahedron t1 H3.png


Rhombic hexecontahedron

The rhombic triacontahedron has over 227 stellations.[3][4]

Related polyhedra[edit]

Spherical rhombic triacontahedron

This polyhedron is a part of a sequence of rhombic polyhedra and tilings with [n,3] Coxeter group symmetry. The cube can be seen as a rhombic hexahedron where the rhombi are also rectangles.

The rhombic triacontahedron forms the convex hull of one projection of a 6-cube to 3 dimensions.

A rhombic triacontahedron with an inscribed tetrahedron (red) and cube (yellow).
(Click here for rotating model)
A rhombic triacontahedron with an inscribed dodecahedron (blue) and icosahedron (purple).
(Click here for rotating model)
The 3D basis vectors [u,v,w] are:
u = (1, φ, 0, -1, φ, 0)
v = (φ, 0, 1, φ, 0, -1)
w = (0, 1, φ, 0, -1, φ)
Shown with inner edges hidden
There are 64 vertices and 192 unit length edges forming pentagonal symmetry along specific axis (as well as hexagonal symmetries on other axis).

Uses of rhombic triacontahedra[edit]

An example of the use of a rhombic triacontahedron in the design of a lamp. IQ stands for “Interlocking Quadrilaterals”.

Danish designer Holger Strøm used the rhombic triacontahedron as a basis for the design of his buildable lamp IQ-light. (IQ for "Interlocking Quadrilaterals")

Woodworker Jane Kostick builds boxes in the shape of a rhombic triacontahedron.[5] The simple construction is based on the less than obvious relationship between the rhombic triacontahedron and the cube.

Roger von Oech's "Ball of Whacks" comes in the shape of a rhombic triacontahedron.

The rhombic triacontahedron is used as the "d30" thirty-sided die, sometimes useful in some roleplaying games or other places.

See also[edit]


  1. ^ Stephen Wolfram, "[1]" from Wolfram Alpha. Retrieved January 7, 2013.
  2. ^ http://www.cutoutfoldup.com/979-golden-rhombohedra.php
  3. ^ Pawley, G. S. (1975). "The 227 triacontahedra". Geometriae Dedicata. Kluwer Academic Publishers. 4 (2-4): 221–232. ISSN 1572-9168. doi:10.1007/BF00148756. 
  4. ^ Messer, P. W. (1995). "Stellations of the Rhombic Triacontahedron and Beyond". Structural Topology. 21: 25–46. 
  5. ^ triacontahedron box - KO Sticks LLC

External links[edit]