|Type||Personal digital assistant|
|Retail availability||October, 2003–April, 2005|
|Media||Secure Digital card|
|Operating system||Palm OS 5.2.1|
|Display||320 x 320 16-bit, 320 x 480 in later models TFT LCD|
|Connectivity||Universal Serial Bus, IrDA|
|Power||lithium ion battery|
||This article contains content that is written like an advertisement. (August 2010)|
The Tungsten series, first introduced in October 2002 with the Tungsten T, was part of Palm, Inc.'s move away from arcane model numbers, Palm OS 4, and aging Motorola processors. While the Zire was the same old PDA in a white plastic case, the Tungsten T was the first to run Palm OS 5, bringing the Palm line more up to date to compete with increasingly popular and powerful Sony Clie and Windows Mobile competitors. Since then, the Tungsten line has been Palm's "prosumer" line, aimed at business users and hobbyists wanting a higher performance Palm PDA.
All of the Tungsten PDAs have a few attributes in common, like a:
- 65,536 color LCD touch screen with a minimum 320 x 320 pixel resolution
- metal or metal-toned enclosure
- flip cover to protect the screen
- Secure Digital (SD) card slot with SDIO for memory cards and accessories
All Tungstens, with the exception of the Tungsten W, run under Palm OS 5 "Garnet" on an ARM processor and have non-user-replaceable lithium-ion batteries. Some users replace battery packs with third-party units. The T3, for example, is shipped with a 900 mAh capacity battery but third-party 1100 mAh or 1150 mAh LI-poly batteries of the same physical dimensions are available. Tungsten models use a five-way navigator pad, in the shape of a rounded rectangle, circle, or oval and have four buttons for built-in applications.
Palm Universal Connector was used by the Tungsten T, Tungsten T2, Tungsten T3, Tungsten C, Tungsten W, for cradles and accessories. The Tungsten E used a mini-USB connection. The Tungsten T5, Tungsten E2 and TX used an Athena Connector also known as the multi-connector.
Tungsten handhelds have never had a built-in camera.
Tungsten handhelds cost between US$199 and $399.
Palm's Tungsten E was the cheapest of the Tungsten series, and as such, has been one of the most successful. It has 32 megabytes of memory, a Texas Instruments OMAP (ARM) 126 MHz processor, a 2 1/8 x 2 1/8 inch (54 x 54 mm) transreflective TFT screen, and runs Palm OS 5.2.1. It is 4.5 by 3.1 by 0.5 inches (114 by 79 by 12 mm), and weighs 4.6 ounces (131 g).
It has a standard 3.5 mm headphone jack and a speaker in back. It uses a mini USB connector not supported by most dock accessories. At introduction, it was US$199.
The Tungsten E, released in October 2003, was intended to replace the aging Palm m515, one of the last holdouts from Palm's old product line. The Tungsten E, though, did not include a vibrating alarm and indicator light like the Palm m500 series had.
Since it was released at the same time as the Tungsten T3, it includes the newer PIM apps and the enhanced "agenda view" for quick viewing of to-do items and upcoming calendar items. The Tungsten E has been one of Palm's strongest sellers since its introduction, to the point where its simple slate form factor prevailed over the Tungsten T series' previous slider form factor in the development of the Tungsten T5 and the TX.
It was superseded in April 2005, when palmOne released the Tungsten E2.
The Tungsten E2, introduced on April 13, 2005 replaced the similarly named Tungsten E, has 32 MB of memory (29.7 available), a 200 MHz Intel XScale processor, 320x320 Transflective TFT color display, and runs Palm OS Garnet v5.4.7. It is 4.5 tall by 3.1 wide by .59 inches thick (114 x 79 x 15 mm) and weighs 4.7 ounces (133 g). It has a standard 3.5 mm headphone jack, a longer lasting battery than the Tungsten E, has Bluetooth capability, and a single speaker on the back.
Much like the Tungsten T5 and Treo 650, it uses non-volatile flash memory, this time in the form of Non-Volatile File System, meaning that the data will be preserved if the battery runs out. It uses standard SD memory cards and is also compatible with the Palm Wi-Fi Card (sold separately). It uses a standard Athena Connector port supported only by some new accessories.
When it was released, its retail price was US$249. In October 2005, the price was reduced to US$199.
Unlike other models, the Find function is limited to only the first eight matches, and the calculator incorrectly finds percentages at half their actual value, though this was fixed in units shipping after April 2006.
The Tungsten E2 has the ability to use WiFi, but only as an add-on SDIO card made by PalmOne (now Palm). Palm's WiFi card is manufactured by SyChip. Encryption is restricted to WEP, the E2 does not offer WPA or WPA2.
The maximum size SD card supported on the Tungsten E2 is 1 GB due to a software limitation. In order to read larger SD and SDHC cards an upgraded driver is required. The previous model (Tungsten E) has been reported to be capable of using 2 GB SD cards.
The second Tungsten, the Tungsten T, introduced in November 2002 and known during development as the M550, was the first model to use Palm OS 5. The Tungsten T was designed by Palm engineers based in Arlington Heights, Illinois.
- 16 megabytes of memory,
- Texas Instruments OMAP (ARM) 144 MHz processor,
- built-in microphone for voice memos,
- dedicated voice memo button,
- vibrating alarms,
- standard 3.5 mm headphone jack,
- one front-facing speaker,
- indicator light,
- runs Palm OS 5.0, and
- is otherwise a standard Tungsten; see above.
It is 4.0 inches (102 mm) tall, 4.8 inches (121 mm) tall with the slider extended, by 3.0 inches (78 mm) wide by 0.6 inches (15 mm) thick, and weighs 5.6 ounces (146 g).
It sets itself apart from other PDAs physically by having a sliding lower portion; the bottom third of the casing can be slid up and down to cover or reveal the touch-sensitive Graffiti writing area. At introduction, it was US$499.
Many of the features in the Tungsten T are Palm firsts. It was the first Palm PDA to use a version of Palm OS 5 and an ARM processor, which meant that it had the software and processing power for high-quality real-time video playback and MP3 playback.
It was also the first Palm PDA with a:
- 320 × 320 resolution screen
- Bluetooth wireless communications radio built-in
- microphone with a dedicated voice memo button
- front-facing speaker instead of rear-facing
- telescoping stylus
- bigger reset hole that can be reset with the stylus tip instead of a pin
The slider feature was unique. When open, the Tungsten T looked like a normal slate-shaped PDA, but the bottom portion, with the five-way controller and four buttons, could slide closed, covering up the Graffiti writing area. This made it the smallest Palm PDA in height.
Palm's reasoning behind the slider was people spend more time viewing data rather than entering data. Thus, they chose to hide the data entry medium while not in use to make a more compact device.
The slider caused two problems with the Tungsten T. One drawback was that the Tungsten T was notorious for needing frequent manual recalibration of the digitizer after about one year of use. A software patch issued by Palm has helped with this problem. The other problem was that the ribbon cable between the mainboard and the digitizer connectors that would change their resistance over time. The only way to (temporarily) correct this problem was to disassemble the PDA and remove and reinstall these connectors.
The Tungsten T was succeeded by the Tungsten T2.
The Tungsten T2, introduced in July 2003 for US$399, was simply a minor update to the Tungsten T, and had exactly the same form factor. (Save for the label and the T|T2's slightly lighter case color, they are superficially identical.) The memory was increased to 32 megabytes, the screen was replaced with a superior (backlight) TFT LCD of the same size and resolution, Palm OS upgraded to 5.2.1, Graffiti replaced with Graffiti2. Since it is much like the Tungsten T model, PalmOne did not deliver this model to some markets, such as mainland China or Brazil.
The Tungsten T2 was discontinued in April 2004, having been succeeded by the Tungsten T3.
The Tungsten T3 was the third T-Class Tungsten device, released in October 2003. It has 64 MB of memory (52 MB usable), a 400 MHz Intel PXA261 processor, a new 3.7" 320x480 transflective TFT LCD touch-screen, and runs Palm OS version 5.2.1. It was the last product designed by the Palm engineers in Arlington Heights.
The T3 included Active Input Technology with Virtual Graffiti 2, a Virtual keyboard, and the typical Tungsten line slider. With many other additional features, the T3 was released with the same $399 retail price tag as the Tungsten T2 until the release of the Tungsten T5, when it was reduced to $349.
Like the Tungsten T and T2, the T3 still has a front-facing speaker, microphone, vibrating alarm, indicator light, and all of their other features.
Like the Tungsten E, the Tungsten T3 came with an enhanced PIM Suite which categorized all appointments and tasks on the Calendar (formerly Date Book) screen. The Enhanced PIM Software also has an improved Task suite (formerly To Do List) which can categorize Tasks by either urgency, category, etc., and an improved Contacts (formerly Address) application with picture support and more fields.
Furthermore, a new status bar always appears at the bottom of screen, giving quick access to the time, system information, home, find, menu access, alerts, Bluetooth, full-screen writing, screen rotation, and what is shown in the input area.
The Tungsten T3 comes with RealPlayer for Palm OS Handhelds (called RealOne Player for Palm OS Handhelds at the time of its release) in addition to a 3.5 mm Stereo Jack, making it a digital music player when used with a Secure Digital (SD) flash memory card.
The T3 has a bigger, non-round, 5-way navigation pad with the four application buttons placed around it in a circular fashion instead of in a row, breaking Palm's traditional application button layout. Palm went back to its more traditional layout in the Tungsten T5 and Palm TX.
The T3 has a Green/Red LED, but for reasons unknown Palm decided to use only the green LED. Red is only activated with certain programs and libraries.
The T3 also has the Palm Universal Connector and an included USB cradle. The cradle is used for both charging and synchronizing the Palm's data to a PC (software is included for Windows and Mac OS X, but with the pilot-link software, the unit synchronizes perfectly with a Unix operating system).
Early criticisms of the Tungsten T3 include it electronically damaging SD cards and its battery life (900 mA·h battery). Palm addressed the Secure Digital Card problem by releasing a Firmware Update. After the "SD Card Patch" was applied in early (by the user via a firmware patch) and later (at the manufacturing stage) releases of the Tungsten T3, no other criticisms were known to have risen from the Tungsten T3's use.
Shortly after the early 2005 release of the Tungsten T5, the Tungsten T3 was discontinued. Since then, no Palm handhelds have included a vibrating alarm, a slider to make the device smaller, or the Palm Universal Connector.
The Tungsten T5, introduced in October 2004 and now discontinued, is a combination of the Tungsten E and Tungsten T3. It is the first and only Tungsten to use a 416 MHz Intel XScale PXA270 processor. It has a 320x480 TFT 16-bit Color Screen with a virtual input area like the Tungsten T3 instead of a 320x320 Color Screen with a fixed input area used in the Tungsten E, E2, T, and T2. It retained the shape of the Tungsten E, but is slightly thicker, instead of the shape of Tungsten T series, where its name comes from.
The Tungsten T5 is the first Palm PDA to have a 320x480 pixel screen that is all revealed instead of the "slider" used in the Tungsten T3, T2, and T, though other brands have had sliderless HVGA displays for years. It is also the first to have 256 MB of memory (versus 64 MB in the Tungsten T3), with 161.2 MB configured as a Flash Drive, 63.8 MB available for applications, and 31 MB reserved for the OS. This can result in some confusion since the memory is not equally usable as in the previous Palm PDAs.
While the Tungsten T5 was meant to be a replacement for the Tungsten T3, it is missing several features from the Tungsten T3 such as a charge-indicator LED, vibrating alarm, included HotSync cradle, and built in microphone for voice memos. Furthermore, its speaker became rear-facing instead of front-facing and it uses the Athena Connector instead of the Palm Universal Connector.
Power users also criticize the Tungsten T5 for its Tungsten E-derived form factor. The speed of the Bluetooth connection can only be set to a maximum of 128 kbit/s.
At the time of its release, the Tungsten T5 (along with the Treo 650) was plagued with memory inefficiency problems, third-party application issues, and device driver crashes, due to the new Non-Volatile File System.
Tungsten T5 owners were encouraged to install the Tungsten T5 1.1 Update, which addressed the memory inefficiency issues alongside other operating system-level problems.
Issues/problems with the power-on switch have also been discovered, where it will not switch on unless a menu button is pressed or sometimes an SD card needs to be inserted. This is a known issue at Palm, but no fix is forthcoming. The best recommendation is to download a freeware program which can re-map the power button to one of the more reliable hardware buttons.
In some countries, including Australia, the Tungsten T5 was withdrawn early since the Palm TX offered the highly desirable WiFi built-in, instead of having to use the optional Palm Wi-Fi Card in its one and only SD slot. Many non-Palm PDAs on the market at the time came standard with built-in WiFi.
The Tungsten W (known as the i710 during its development period, and X420 at the prototype stage), introduced in February 2003. The only smartphone (PDA/cellphone hybrid) in the Tungsten series, instead of running Palm OS 5 on an ARM-compatible processor, it used Palm OS 4 with a low-power Motorola DragonBall processor, to increase the battery life. The combination of using a highly advanced lithium polymer battery and energy conserving electronics yielded longer battery life.
The Tungsten W focused more on its PDA half as opposed to its cellular telephony half, the focus of the succession of the Palm i705 and Palm VII. Unlike either the Palm i705 and the Palm VII (which both could only make data connections over the Mobitex pager network), downloads and uploads were done using comparatively-fast GPRS connections. It didn't have a microphone and the speaker couldn't be used for phone calls; instead, an included ear bud and microphone loopset was used for voice calls.
A flip cover was released that allowed the user to hold the handheld like a normal phone and talk on it, although it did obscure the screen. (In the US, it was sold exclusively by AT&T Wireless, and all Tungsten W handsets sold in the US were locked to AT&T Wireless's service. Note, however, that Canadian W's are not locked to any service provider and can operate with T-Mobile SIM cards).
It has 16 megabytes of memory, a Motorola DragonBall 33 MHz processor, a built-in microphone, vibrating alarms, indicator light, and runs Palm OS 4.1.1 (upgrade to 4.1.2 is available) with special enhancements for its hi-res display. It is 4.8 inches (121 mm) tall by 3.1 inches (79 mm) wide by 0.7 inches (18 mm) thick, and weighs 6.4 ounces (181 g). It has a standard 2.5 mm cellphone loopset jack, and a single speaker.
The bottom half is a thumb-sized keyboard for typing, and it has no silkscreened Graffiti input area. (It is otherwise a standard Tungsten; see above.) At introduction, it was US$419 before service provider subsidies.
The Tungsten W was succeeded by the Treo 600 after Palm purchased Handspring and became palmOne.
The Tungsten C introduced in April 2003 was, at the time of its release, palmOne's only handheld that allows the user to access the internet wirelessly through 802.11b Wi-Fi without the use of a card or other external device. It lacks support for the WPA encryption standard. It does, however, have built in PPTP VPN for a secure connection to a VPN server.
Other details are its 400 MHz Intel PXA255 processor, 64 MiB of memory (51 MiB available for programs + 12 MiB heap), built-in thumb keyboard, a "five-way navigator," a Secure Digital/SDIO/MultiMediaCard slot, vibrating alarms, indicator light, and a 2.5 mm headset jack, capable of voice recording and monaural sound output with a proprietary earbud headset (sold separately). A cell phone headset with the same type connector has been tested to work.
There have also been third-party applications and hardware that work around the Tungsten C's monaural audio. For instance, a special adapter can be purchased from PPC Techs to convert to a standard 3.5 mm jack that splits the mono output into left and right channels.
- Palm, Inc.
- Palm Pilot
- Palm TX, the first business-oriented Palm-branded handheld without the Tungsten moniker.
- Zire Series, Palm's brand of consumer-grade handhelds
- Treo Series, Palm's brand of Smartphones
- LifeDrive, Palm's brand of Professional-Class Mobile Managers
- m500 Series
- Palm Handheld Modifications to increase battery life
Competitors and contemporaries
- Palm Wi-Fi Card Support
- Palm Wi-Fi Card at the Palm Store
- Such as PowerSDHC by Dmitry Grinberg.
- SD card compatibility Test in TamsPalm Blog
- Picture of a Tungsten|W and the two versions of the X420
- Palm Unveils Palm Tungsten T, the Most Compact and Powerful Palm Branded Handheld, Palm Press Release, Oct. 28, 2002
- Palm Introduces New Integrated Wireless Handheld, Palm Press Release (Tungsten W), Oct. 28, 2002
- Palm Introduces Tungsten T2 Handheld, With Palm's Sharpest Screen, More Memory and Software, Palm Press Release, Jul. 23, 2003
- MobileTechReview, review site and (incomplete) database of models
- PalmInfoCenter, longstanding Palm review site: T T2 T3 T5
- 1src, large Palm OS user community
- Palm Handhelds Support Pages: E E2 T T2 T3 T5 W C
- infoSync World Review
- list of all Palm OS versions on PalmOne handhelds
- Easy to use interface (video)