Underfall Yard was commonly referred to as "The Underfalls" and takes its name from the underfall sluices. The original construction was completed in 1809 under the direction of William Jessop and substantially improved by Isambard Kingdom Brunel in the 1830s.
Restored in the 1990s, Underfall Yard has been designated as a scheduled monument and from the 1970s onward many of the buildings at Underfall Yard have earned Grade II Listed Building status. The harbour and its equipment are still actively maintained, and house a cooperative of maritime companies.
- 1 History
- 2 Underfall sluices
- 3 Buildings
- 4 Workshops and Businesses
- 5 See also
- 6 References
- 7 External links
- 8 Bristol Harbour Map
In the early nineteenth century the engineer, William Jessop was engaged by the Bristol Dock Company to create a Floating Harbour to eliminate the problem of ships being grounded at low tide. Jessop built a lock to retain the water in the harbor; this was completed in 1809, and allowed ships to remain floating at all times, unaffected by the state of the tide on the river. Part of the project included building a dam at the Underfall Yard with a weir, known as the Overfall, to allow surplus river water to flow into the New Cut, an excavation which by-passed the Floating Harbour and joined the River Avon near Temple Meads.
The docks' maintenance facility was established on the land exposed by the damming of the river to construct the harbour and remains sited at this location to the present day. By the 1830s the Floating Harbour was suffering from severe silting and Isambard Kingdom Brunel devised the underfall sluices based on William Jessop's original plans and recommended the use of dredgers as a solution .
The Bristol Docks Company never achieved commercial success and was taken over by Bristol City Council in 1848. In 1880 the Council bought the Slipway and yard to enlarge the docks' maintenance facilities.
The 'Underfall' system was re-built in the 1880s, with longer sluices, and the yard above was enlarged. Brunel's method of silt disposal is still in operation today, but the silt is carried in mud barges or pumped to the sluices through a quayside pipe system from the more efficient modern 'Cutter-Suction' dredgers.
During the 20th century the western parts of the yard were leased to P & A Campbell Ltd, operators of the White Funnel Line of paddle steamers as a maintenance base. The yards have been little altered recently except for the replacement of the three-storey 'A' block over the sluice paddle room resulting from bomb damage in World War II.
Underfall Yard has been refurbished under the management of the Underfall Yard Trust (previously Underfall Restoration Trust) thanks to the Heritage Lottery Fund, AiM Biffa Award, and donations from various organisations and trusts.
Based at the yard at the moment are maritime academies, a scout sailing section, a blacksmith, rigging company, Omni, and three boat building businesses.
In 2015 a major restoration project was announced. The work included the development of a cafe and visitor centre. £2.8 million from the Heritage Lottery Fund will provide much of the funding, though an additional £1 million was to be sourced elsewhere. An oral history project is currently being conducted and schools education programmes have been introduced as part of the restoration and redevelopment.
Jessop's original designs for the harbour included a dam with an 'overfall', with the level of the water determined by the height of the dam's crest. As a result of the accumulation of mud and silt in the harbour, ships entering the narrow harbour were frequently being grounded. In 1832 Brunel was called upon to provide the solution to this problem and designed the sluice system, still in use today, to remove excesses of silt and mud.
In place of the Overfall he constructed three shallow sluices and one deep scouring sluice, between the harbour and the New Cut, together with a dredging vessel, known as a drag boat, to scrape the silt away from the quay walls. Sluices 1, 2 and 4 ('shallow') are used to control the water level, while sluice 3 ('deep') removes the silt. When the deep sluice is opened at low tide, a powerful undertow is created which sucks the silt out of the harbour and into the river. Since the original introduction of the sluices, they have been changed and renewed several times but today's sluice system was installed in the 1880s. In March 1988, the sluice control was computerised and automated.
Most of the buildings and engineering installations at the yard were constructed between 1880 and 1890 under the direction of John Ward Girdlestone. Many of them have been designated by English Heritage as listed buildings.
The octagonal brick and terracotta chimney of the engine house dates from 1888, and is grade II* listed, as is the hydraulic engine house itself. It replaced the original pumping house which is now The Pump House visitor centre. It is built of red brick with a slate roof and originally contained two steam engine powered pumps. These were replaced in 1907 by the current electrically powered machines from Fullerton, Hodgart and Barclay of Paisley (the currently installed electric motors were manufactured by JH Holmes & Co, Hebburn-upon-Tyne and date from 1938-9). It powered the docks hydraulic system of cranes, bridges and locks.
The tower houses a raised weight hydraulic accumulator which stores the hydraulic energy ensuring a smooth delivery of pressure and meaning that the pumps do not need to be running the whole time in order to satisfy peak demand. The external accumulator was added in 1954. The water is pumped from the harbour into a header tank and then fed by gravity to the pumps. The working pressure is 750 lbf/in² (5.2 MPa).
Dock maintenance workshops
The dock maintenance workshops survive from the 1880s but were extended in the early 20th century. The brick building is topped with a tiled double-pile hipped roof with corbelled eaves. It has sliding doors at each end, giving access to the boiler and engine houses, blacksmith's and engineer's shops. Much of the original machinery survives, including steam-powered plant from the mid-1880s, these include a Whitworth planing machine, a Whitworth slotting machine, punching-and-shearing machines, a long-bed lathe and a steam hammer. There is also wall-mounted line-shafting and a Tangye horizontal engine and Cornish boiler.
Pattern maker's shop
Many of the original wooden patterns still exist with some being used for educational purposes, some being put on display, and others have been kept for operational purposes. The shop is currently occupied by RB Boatbuilding Ltd, a small business dedicated to the re-creation of classic, late 19th century, wooden working boats, including the Bristol Channel Pilot Cutter. The Slipway Co-operative Ltd manages the slipping of boats. They build, repair and restore a variety of wooden craft including the 14 feet (4 m) Bristol Jolly Boat.
The original slipway was built by John Ward Girdlestone in 1890 which had replaced a predecessor built in the 1850s by boat builders Ross and Sage. It used a system in which the ship is floated onto the cradle and secured. The cradle is then drawn out of the water with a steam-driven winch. The device was a low-cost alternative to dry docks for maintenance and repair work. This became known as the Patent slipway or 'Heave-up Slip' and was patented in 1819 by shipbuilder Thomas Morton of Leith in Scotland.
The 1890 replacement was originally driven by an hydraulic engine powered by the dock's hydraulic system. In 1924, an electric motor was installed which still operates today. The Bristol slipway is relatively small with a cradle of 100 feet (30 m) and a runway of 265 feet (81 m) and can lift vessels up to 250 tons (250 tonnes).
It fell into disuse by 1974. By the 1990s this was rotting and was rebuilt by members of the Slipway Co-operative and Underfall Trust in 1998–99. The restoration required the complete renewal of the underwater runway with steel piling to replace the previous timber, iron and masonry supports. The above-water track was re-laid, reusing the original cast iron centre rails with their integral ratchets. The cradle was completely rebuilt on the original pattern. The functioning of the slipway was essential for the long-term preservation of the restored Underfall Yard as a historic industrial monument, as it provided the Underfall Restoration Trust with funds to maintain the slipway and buildings, and the tenants of those buildings with boats to earn a living.
The Pump Room
The power house at Underfall Yard was built in 1887 to supply hydraulic power to a network around the floating harbour. It was originally powered by steam (the large chimney remains from this system). The room which is now the visitor centre housed three boilers which powered steam hydraulic pumps. There are three electric pumps in the room adjacent to the visitor centre which are regularly run to demonstrate how they worked. These three pumps are 1907 replacements for the originals.
The Big Shed
Originally used as a place in which large items such as lock gates were built, the Big Shed now houses and is used by a selection of maritime businesses. It is not open to the public.
Workshops and Businesses
Fire Iron Art is the blacksmith at Underfall Yard. Bespoke, hand forged ironwork is made by Joanna Williams in the original forge using traditional blacksmithing techniques. Fire Iron Art undertakes maritime commissions and conservation work.
Underfall Yard has three boat building businesses in residence. RB Boatbuilding are dedicated to the recreation, restoration, and repair of classic, late 19th century working wooden boats. They also take on repair and restoration work. Shipshape Boatbuilding & Woodwork build and restore boats or create custom woodwork to commission. Skin on frame kayaks and canoes are also made and build-your-own skin on frame kayak workshops are run by Shipshape. Star Yachts are a relatively new company started after working at Underfall Yard repairing and restoring wooden boats. Win Cnoops is part Star Yachts and remains responsible for all of the slipway workings and the day to day management of Underfall Yard.
Motive Marine are an insured and experienced company specialising in marine engineering, inboard and outboard, engine, drive, propulsion, and electrics, installations, servicing, maintenance, and repair. They have one base in Bristol in Underfall Yard and can also be found in Southampton.
Traditional Rigging is a company consisting of some of the UK's most experienced riggers. They're specialists in working boats, classic yachts, and traditional rigs. The business moved to Underfall Yard in the early 1990s and the founder, Dennis Platten, also worked as Harbour Master until recently.
Bristol Maritime Academy offers maritime-based courses ranging from first aid to powerboat handling. They are a Royal Yachting Association recognised training centre. They are the only RYA coastal training centre based in Bristol Harbour.
- "A walk through Victorian Bristol" (Word). Bristol City Council. Retrieved 9 September 2007.
- Mellor, Penny (2013). Inside Bristol: Twenty Years of Open Doors Day. Redcliffe Press. pp. 70–71. ISBN 978-1908326423.
- McNeill, Jeremy (1997). Bristol's Harbourside: A Guide to the City Docks. Hotwell. pp. 38–39. ISBN 978-0953027002.
- "History". Underfall Boatyard. Archived from the original on 30 September 2007. Retrieved 9 September 2007.
- "Yard Businesses". Underfall Yard. Retrieved 2018-04-12.
- "Underfall Yard on Bristol harbourside in £3.8m revamp". BBC. Retrieved 2 June 2015.
- "Our Story". Underfall Yard. Retrieved 12 April 2018.
- "Our Story". Underfall Yard. Retrieved 2018-04-12.
- "Chimney of hydraulic engine house". Images of England. Archived from the original on 15 October 2007. Retrieved 18 August 2006.
- "hydraulic engine house". Images of England. Archived from the original on 22 April 2008. Retrieved 18 August 2006.
- "Bianchi and Servettaz Hydraulic Interlocking". Dr Elizabeth R. Tuttle. Retrieved 25 August 2018.
- "Machine shop". Images of England. Archived from the original on 21 October 2012. Retrieved 18 August 2006.
- "former pattern-maker's shop and stores". Images of England. Archived from the original on 21 October 2012. Retrieved 18 August 2006.
- "RB Boatbuilding". RB Boatbuilding. Retrieved 9 September 2007.
- "Slipway Cooperative". Slipway Cooperative. Archived from the original on 24 August 2007. Retrieved 9 September 2007.
- "Patent slip and quay walls". Images of England. Archived from the original on 18 November 2007. Retrieved 18 August 2006.
- "Slipway". Slipway Co-operative Ltd. Archived from the original on 27 August 2007. Retrieved 9 September 2007.
- "Visitor Centre". Underfall Yard. Retrieved 12 April 2018.
- "Fire Iron Art". Fine Iron Art. Retrieved 12 April 2018.
- "RB Boatbuilding". RB Boatbuilding. Retrieved 12 April 2018.
- "Shipshape". Shipshape. Retrieved 12 April 2018.
- "Star Yachts". Star Yachts. Retrieved 12 April 2018.
- "Motive Marine". Motive Marine. Retrieved 12 April 2018.
- "Traditional Rigging". Traditional Rigging. Retrieved 12 April 2018.
- "Bristol Maritime Academy". Bristol Maritime Academy. Retrieved 12 April 2018.
- "Big Big Train – The Underfall Yard". Discogs. Retrieved 12 April 2018.
|Wikimedia Commons has media related to Underfall Yard.|
- Underfall Boatyard – Official website
- Bristol City Council:
- History of Bristol Harbourside area
- About Bristol: History of the Floating Harbour
- A history of the docks
- Bristol City Docks
- Underfall Yard, includes history and visitor centre
Bristol Harbour Map
- Prince's Wharf, including M Shed, Pyronaut and Mayflower adjoining Prince Street Bridge
- Dry docks: SS Great Britain, the Matthew
- St Augustine's Reach, Pero's Bridge
- Bathurst Basin
- Queen Square
- Bristol Temple Meads railway station
- Castle Park
- Redcliffe Quay and Redcliffe Caves
- Baltic Wharf marina
- Cumberland Basin & Brunel Locks
- The New Cut
- Netham Lock, entrance to the Feeder Canal
- Totterdown Basin
- Temple Quay
- The Centre
- Canons Marsh, including Millennium Square and We The Curious
- Underfall Yard
- Bristol Bridge