User talk:Mr. Matté/Archive 5

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

PLEASE READ: If you leave a question/comment here, I will respond your comments/questions here, not on your talk page. If you left a question or anything else to which you want me to respond, check back here; I usually reply quickly. Also, if I left a message on your page and you're coming over here to respond, I'd prefer that you respond under my point/question on your own page. This way keeps all conversation on one section and you don't have to shuttle through two or more pages to follow the conversation chronologically. Of course, if you absolutely prefer to have it your way, make a note at the end of your message.

--Mr. Matté

Barnstar

The Tireless Contributor Barnstar
Thanks for your help in creating KMLs for road articles! Dough4872 23:32, 3 September 2012 (UTC)

Wikimedia Commons missing License

Hi Mr. Matté, please have a look at File:NJ CR 518 at CR 654.JPG and File:NJ CR 569 end in Hopewell.JPG. They both need a valid copyright tag. Thanks in advance. -- Rillke (talk) 18:58, 25 September 2012 (UTC)

Resolved
 – Rillke (talk) 19:20, 25 September 2012 (UTC)

Speedy deletion nomination of Template:Attached KML/Washington State Route 231

A tag has been placed on Template:Attached KML/Washington State Route 231, requesting that it be speedily deleted from Wikipedia. This has been done for the following reason:

Spam template; wikitext doesn't work correctly

Under the criteria for speedy deletion, articles that do not meet basic Wikipedia criteria may be deleted at any time.

If you think that the page was nominated in error, contest the nomination by clicking on the button labelled "Click here to contest this speedy deletion" in the speedy deletion tag. Doing so will take you to the talk page where you can explain why you believe the page should not be deleted. You can also visit the page's talk page directly to give your reasons, but be aware that once a page is tagged for speedy deletion, it may be removed without delay. Please do not remove the speedy deletion tag yourself, but do not hesitate to add information that is consistent with Wikipedia's policies and guidelines. If the page is deleted, you can contact one of these administrators to request that the administrator userfy the page or email a copy to you. Tóth Péter Bence (talk) 20:05, 13 October 2012 (UTC)

Thank you!

The Michigan State Highways Barnstar
Thank you for all of the KMLs, and keep up the good work! Imzadi 1979 → 18:57, 14 October 2012 (UTC)

County map data

Hello! I am a student exploring a scripting and visualization software called Grasshopper and I would like to import the data in your USA county map to generate parametized analysis. As I understand your file, when I reformat your .svg file into an .xml and read it in Excel, column "AT" contains the coordinate information that draws the vectors in your map. Can you explain what these values ("M 74.350745,278.69935 L 73.911745,278.69935 L 73.030745,279.13935") represent? I can extract the data, and the software I am working with can translate it into points, vectors, lines, etc., but I do not understand how the coordinate system works. Any help you might be willing to offer would be much appreciated! 24.193.243.30 (talk) 01:07, 19 October 2012 (UTC)Michael

Sorry, but I don't know all the internal stuff with .svg coding either. I just work with the visual stuff. But thanks for taking an interest in my map! —Mr. Matté (Talk/Contrib) 02:02, 19 October 2012 (UTC)

Reviewer

Hello. Your account has been granted the "reviewer" userright, allowing you to review other users' edits on certain flagged pages. The list of articles awaiting review is located at Special:PendingChanges. A full list of articles that have pending changes protection turned on will be at Special:StablePages.

Being granted reviewer rights neither grants you status nor change how you can edit articles.

See also:

If you do not want this user right, you may ask any administrator to remove it for you at any time. --Rschen7754 23:20, 2 December 2012 (UTC)

Autopatrolled

Hi Mr. Matté, just wanted to let you know that I have added the autopatrolled right to your account, as you have created numerous, valid articles. This feature will have no effect on your editing, and is simply intended to reduce the workload on new page patrollers. For more information on the patroller right, see Wikipedia:Autopatrolled. Feel free to leave me a message if you have any questions. Happy editing! Rschen7754 23:22, 2 December 2012 (UTC)

Replacing lengths

Merry Christmas, Mr. Matté, and thank you for making a loooooot of KMLs. We really appreciate it. However, I noticed that recently you've been replacing official PennDOT highway lengths with those obtained from Google Maps and the KMLs you've created. This has occurred most recently in this edit. This is pretty much the opposite of what we've been trying to do, as in we're trying to get as many official DOT lengths as we can. For this reason, I must ask that you stop replacing the official lengths. Again, Merry Christmas! –TCN7JM 18:27, 24 December 2012 (UTC)

The "official" length of PA 903 is 16.03 mi while the length as measured in Google Maps, Bing, my KML, Mapquest, and Yahoo gives it as 17.7 mi. This would cause problems when I'm writing in all the mileages for the junction table as it would look off to have the length as 16.03 and the last intersection at 17.7. It'd be nice to have a link to the file of official PENNDOT mileages to see if there is some kind of discrepancy (perhaps 16.03 is the amount of miles that they maintain though there was one instance of the official length being longer than the measured length). I won't delete any more "official" lengths but I will stop doing the jct tables if there is such a discrepancy with the maps' mileages and the official mileage. —Mr. Matté (Talk/Contrib) 18:45, 24 December 2012 (UTC)
I have to ask, first, which software do you use to create KMLs? I use Google Earth, so my measurements are way off by default, but you may be using a better software. –TCN7JM 18:54, 24 December 2012 (UTC)
I use GE too (version 5.2). Perhaps the terrain affects the measurements? —Mr. Matté (Talk/Contrib) 18:59, 24 December 2012 (UTC)

As for the 16.35 mi, I have that from the PennDOT QGIS data, which is where I got it. You're going to have to get Quantum GIS and load the data to get the mileage. Mitch32(Victim of public education, 17 years and counting) 19:01, 24 December 2012 (UTC)

I do have QGIS so at least there's that. But yet another new wrinkle: In the PennDOT Video Logs, in the blue bar across the screen, there's one stat (second from right) that lists what I'm guessing is total mileage since the terminus/county line. Again using the PA 903 example, the total for Monroe County is 0.847 mi and Carbon's is 16.838 mi, a total of 17.685 miles.
And now having downloaded the 2012 GIS data, assuming the SUM_LENGTH is in feet, I get a length of 17.73276515 mi for the route. So I think by now, it's safe to assume that the official length of PA 903 is 17.73 miles. Perhaps the data you used, you forgot to highlight a segment or the data is a little off due to high generalization of the line segments. All in all, this was a fascinating learning experience; there's at least new sources for these PA route lengths, and it's probably best to check whatever length you calculate from GIS data against other data.
Two final comments, this has to be the most amount of debate involving Pennsylvania Route 903 since State Trooper Bob A. Booey found a bag of cash along it in 1977 and I think we can all agree that finding sources for PennDOT sucks compared to the New Jersey Department of Transportation. Happy holidays and/or merry Christmas to you all! —Mr. Matté (Talk/Contrib) 19:43, 24 December 2012 (UTC)

Disambiguation link notification for January 4

Hi. Thank you for your recent edits. Wikipedia appreciates your help. We noticed though that when you edited Current members of the United States House of Representatives, you added a link pointing to the disambiguation page Saint Mary's College (check to confirm | fix with Dab solver). Such links are almost always unintended, since a disambiguation page is merely a list of "Did you mean..." article titles. Read the FAQ • Join us at the DPL WikiProject.

It's OK to remove this message. Also, to stop receiving these messages, follow these opt-out instructions. Thanks, DPL bot (talk) 11:27, 4 January 2013 (UTC)

US 395 Alt KML

Hi Mr. Matte. I wanted to let you know that the KML you uploaded on U.S. Route 395 Alternate is incorrect. These Google Map directions indicate the current route of US 395 Alt.

Thank you for your efforts in adding KML files to USRD articles in Nevada. It is appreciated! -- LJ ↗ 06:11, 10 January 2013 (UTC)

That's what happens when my incorrect KML begins at the same road, ends at the road that begins with the same letter, and is also 20 miles long. Sorry about that, it's been fixed. —Mr. Matté (Talk/Contrib) 13:41, 10 January 2013 (UTC)

The Center Line: U.S. Roads WikiProject Newsletter, Winter 2013

Volume 6, Issue 1 • Winter 2013 • About the Newsletter
Departments
Features
State and national updates
Archives • Newsroom • Full Issue • Shortcut: WP:USRD/NEWS
—EdwardsBot (talk) 19:53, 17 January 2013 (UTC)

Thank you.

The Tireless Contributor Barnstar
Thanks again for the countless amount of KMLs. Also, great job with your current work on List of state highways in Alabama. –TCN7JM 17:28, 20 January 2013 (UTC)

USRD Cup 2013

Hey there. Have you considered participating in the 2013 USRD Cup? I think you'd have a great chance to win with your mass creation of KML files. There's even a bonus for creating a certain amount of KMLs! Give it some thought, and have a great day! –TCN7JM 00:45, 22 January 2013 (UTC)

Not sure if you considered joining at all, but I think you'd have a good shot of winning it all just by making KMLs and not doing any other editing. –Fredddie™ 01:22, 28 January 2013 (UTC)

Well I guess I'll have to respond to the many nominations. The timing for the contest is just about the worst possible time for me (well maybe "worst" isn't the best word for my specific situation). The only reason why I'm able to get 25 files done per day is that I've been stuck at home sitting in front of the computer all day since May. But starting February 4th, I start my first full-time job finally putting my new B.S. degree in civil engineering to use. Therefore, with regards to this contest, if nominated, I will not accept, if declared the winner, I will not serve. But I thank you for taking the time to check out my work, and I will continue to work on creating KML files and fixing up road articles, but not with the same volume or regularity as I am at now. Perhaps once I get into a regular work routine, I may be able to participate in the 2014 contest. Alternatively, any edits I do during the contest could be treated as spoilers therefore making the participants work even harder to win. :)

Cheers,

—Mr. Matté (Talk/Contrib) 02:53, 28 January 2013 (UTC)

Anything in the bottom five states WikiWork-wise will be spoiler enough. :) –Fredddie™ 02:59, 28 January 2013 (UTC)

Delaware route maps

They would be more useful in Wikipedia articles with much tighter margins; I've fixed a few of them. AnonMoos (talk) 03:52, 7 February 2013 (UTC)

Per the Task force, the maps should ideally have a ratio of 1.7:1. —Mr. Matté (Talk/Contrib) 03:59, 7 February 2013 (UTC)
It's nice to have a standard, but if the standard leads to the poor state of Delaware being surrounded by a sea of transparent background, and this makes the map display in a smaller and harder-to-read manner in Wikipedia articles, then uniformity has unfortunately led to absurdity... AnonMoos (talk) 04:28, 7 February 2013 (UTC)
I have a comment regarding the Delaware Turnpike map, the turnpike ends at the US 13 interchange, not the Delaware Memorial Bridge. Dough4872 15:37, 10 February 2013 (UTC)

Barnstar

The Tireless Contributor Barnstar
Thanks for your help in making Delaware road maps. Dough4872 22:18, 10 February 2013 (UTC)

Thanks for that; for a while, I had no clue how to get these maps up and functional on the articles. But once I master the skill, I'll end up wasting my weekend doing whole states. Too bad the contest started otherwise I would definitely be in it now that I know I have the time for it. —Mr. Matté (Talk/Contrib) 23:03, 10 February 2013 (UTC)

Yet...another...barnstar (you deserve it!)

The WikiProject U.S. Roads Contributor Barnstar
Thanks for creating some damn good maps for my newest South Dakota articles. Keep up the great work! –TCN7JM 01:42, 10 March 2013 (UTC)

Maybe you could help out a rookie. I'm trying to make a map for K-34 (Kansas highway), and I have a couple of questions:

Where do you get your city data?

Never mind. I found some good data.
  1. The print composer keeps adding a lot of extra room to the top of the file. How do I get rid of that in Inkscape?

I would really appreciate it if you could help me out here. –TCN7JM 02:56, 10 March 2013 (UTC)

I just want to preface my response with the notice that I'm just guessing what your issues are since I can't view them myself and also that since I'm not a coder/debugger when it comes to open-source programs like QGIS or Inkscape, I'm just a speaking about the features I can see when using them.
By city data, do you mean the yellow splotches or the dots/names representing the cities? If the former, in the TIGER data, go to the dropdown menu, select "urban areas," download the national file. For the latter, I just go to Google Maps/Earth and look for cities near the roads. This method is a little less methodical and possibly subject to WP:NPOV since I may leave "your city" out, but I try to be sparing with the city pinpoints anyway.
No. 2, does it physically add space between your preferred boundaries and the actual bounds or in the raw .txt that makes up the .svg file? For the former, in the print composer, you may have to click on "Move item content" (hand+globe) and move the map around a bit. When you get to Inkscape, I have problems involving the viewBox so under Edit>XML Editor, click on the top line ("<svg:svg>"), move to the right and click on the viewBox attribute and delete it. The scales/locations will be screwed up, but once you set your boundaries (I use the black rectangle created by the composer), they'll look better. While you're in the XML editor, there's often a bunch of empty groups so I'd delete them while you're there. In the text file, for all the metadata and junk at the top, I'd just leave it there. I just tried a little test where I got rid of a lot of that stuff, and I ended up saving only 4 KB.
I hope this hasn't thoroughly confused you. :) —Mr. Matté (Talk/Contrib) 03:32, 10 March 2013 (UTC)
I'm not in Inkscape yet, but I don't see how that city thing would be NPOV. When I zoom out to see all of K-34, I can barely see the yellow splotches fullscreen. There's no way I'd be able to see them in the little teeny tiny thumbnail in the infobox. I'm going to ask some more experienced mapmakers on their opinion on this. –TCN7JM 03:42, 10 March 2013 (UTC)

Abandoned PA Turnpike Barnstar

The Special Barnstar
Thanks for adding a map to the Abandoned Pennsylvania Turnpike article, after years of no one else adding one. Jgera5 (talk) 17:14, 15 March 2013 (UTC)

We need your assistance.

Hey there! We're currently in the process of making an easily updatable map of all the Good Articles within our scope. But to do this easily, we need all the KMLs for the Good Articles, which you have a lot of. Would you mind sending me the KML files you have created of current Good Articles via email? It would be greatly appreciated. Thanks. TCN7JM 01:58, 22 March 2013 (UTC)

Just a list of the KMLs or the files themselves? Usually once I upload a file to WP, I delete my copy of the file so the best I can do get you a list, but once you get to the article, it's easy to download a copy of the KML file. —Mr. Matté (Talk/Contrib) 02:12, 22 March 2013 (UTC)
A list is perfectly fine. As long as I know what articles I'm trying to find. TCN7JM 02:16, 22 March 2013 (UTC)

Here's the list of what I hope is all my KML creations. Since I manually went through the list and deleted those that were not mine, I may have left some out/left erroneous ones in so this is not the full list of what I've created. And as a bonus, in the same format, the list of every GA/A/FA article with links to their respective KML file. About the download link, if you want to save the file and according to how my computer/browser handles it, click on it, a Save As... popup will come on, and you must save it as Foo.kml (don't save it as "Foo" or it will be saved as a .php). —Mr. Matté (Talk/Contrib) 01:01, 23 March 2013 (UTC)

Alcohol control in the United States.svg Map

Hi, What data did you use for the Alcohol control in the United States.svg map? Thank you. — Preceding unsigned comment added by 130.189.10.64 (talk) 13:10, 26 March 2013 (UTC)

Divide by 0 error as I didn't create the map. By looking at the file, it looks like I created the blank base county map which was eventually used to create this (and he didn't even have to mention me since I put that map in the PD). —Mr. Matté (Talk/Contrib) 22:43, 26 March 2013 (UTC)
Retrieved from "https://en.wikipedia.org/w/index.php?title=User_talk:Mr._Matté/Archive_5&oldid=1087845270"