Vehicle Assembly Building

Coordinates: 28°35′11″N 80°39′5″W / 28.58639°N 80.65139°W / 28.58639; -80.65139
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Jadebenn (talk | contribs) at 02:18, 1 December 2019 (→‎External links: added refs to Artemis and KSC navbox). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Vehicle Assembly Building
Aerial view of the Vehicle Assembly Building at Kennedy Space Center
Vehicle Assembly Building is located in Florida
Vehicle Assembly Building
Vehicle Assembly Building is located in the United States
Vehicle Assembly Building
LocationBrevard County, Florida, U.S.
Nearest cityTitusville
Coordinates28°35′11″N 80°39′5″W / 28.58639°N 80.65139°W / 28.58639; -80.65139
Area8 acres (3 ha)
Built1966
ArchitectMorrison-Knudsen
Architectural styleIndustrial
MPSJohn F. Kennedy Space Center MPS
NRHP reference No.99001642[1]
Added to NRHPJanuary 21, 2000

The Vehicle (originally Vertical) Assembly Building, or VAB, is the large building at NASA's Kennedy Space Center (KSC), designed to assemble the large pre-manufactured space vehicle components, such as the massive Saturn V and the Space Shuttle; and stack them vertically onto the Mobile Launch Platform and crawler transporter. The future Space Launch System (SLS) will also be assembled there.

At 3,664,883 cubic meters (129,428,000 cubic feet) it is one of the largest buildings in the world by volume.[2] The building is at Launch Complex 39 at KSC, halfway between Jacksonville and Miami, and due east of Orlando on Merritt Island on the Atlantic coast of Florida.[2]

The VAB is the largest single-story building in the world,[3] was the tallest building (160.3 meters, 526 ft) in Florida until 1974,[4] and is still the tallest building in the United States outside an urban area.[4]

History

The VAB, which was completed in 1966, was originally built to allow for the vertical assembly of the Saturn V rocket for the Apollo program and referred to as the Vertical Assembly Building. In anticipation of post-Saturn projects such as the Space Shuttle program, it was renamed the Vehicle Assembly Building in 1965,[5][6] and was used for the shuttle's external fuel tanks and flight hardware, and to mate the Space Shuttle orbiters to their solid rocket boosters and external fuel tanks. Once assembled, the complete Space Shuttle was moved on the Mobile Launcher Platform and Crawler-Transporter to LC-39 Pad A or B.

Construction

VAB during construction (1965) with the three Mobile Launchers for the Saturn V rocket.

In 1963, NASA contracted the Morrison-Knudsen company to design and build the VAB. Construction began with driving the first steel foundation piles on Aug. 2, 1963. It was part of NASA's massive effort to send astronauts to the Moon for the Apollo Program. Altogether, 4,225 pilings were driven down 164 feet to bedrock with a foundation consisting of 30,000 cubic yards of concrete. Construction of the VAB required 98,590 tons of steel.[7] The building was completed in 1966.[8] The VAB is 526 feet (160.3 m) tall, 716 feet (218.2 m) long and 518 feet (157.9 m) wide. It covers 8 acres (3 ha), and encloses 129,428,000 cubic feet (3,665,000 m3) of space.[9]

Located on Florida's Atlantic coast, the building was constructed to withstand hurricanes and tropical storms. Despite this, it has received damage from several hurricanes (see below).

Capabilities

A crane lowers Discovery toward the SSET and SSSRBs in high bay 3 of the Vehicle Assembly Building for STS-124.

There are four entries to the bays located inside the building, which are the four largest doors in the world.[10] Each door is 456 feet (139.0 m) high, has 7 vertical panels and 4 horizontal panels, and takes 45 minutes to completely open or close. The north entry that leads to the transfer aisle was widened by 40 feet (12.2 m) to allow entry of the shuttle orbiter. A central slot at the north entry allowed for passage of the orbiter's vertical stabilizer.

To lift the components of the Space Transportation System, the VAB housed five overhead bridge cranes, including two capable of lifting 325 tons, and 136 other lifting devices.

The building has at least 40 MW of air conditioning equipment, including 125 ventilators[2] on the roof supported by four large air handlers (four cylindrical structures west of the building) to keep moisture under control. Air in the building can be completely replaced every hour. The interior volume of the building is so vast that it has its own weather, including "rain clouds form[ing] below the ceiling on very humid days",[11] which the moisture reduction systems are designed to minimize.

Exterior

The building in 1977, with the Bicentennial Star opposite the flag. The Bicentennial Star was painted over with the NASA insignia in 1998. Note the Space Shuttle Landing Facility at upper left.

The American flag painted on the building was the largest in the world when added in 1976 as part of United States Bicentennial celebrations, along with the star logo of the anniversary, later replaced by the NASA insignia in 1998. It is 209 feet (63.7 m) high, and 110 feet (33.5 m) wide. Each of the stars on the flag is 6 feet (1.83 m) across, the blue field is the size of a regulation basketball court, and each of the stripes is 9 feet (2.74 m) wide.[12] Work began in early 2007 to restore the exterior paint on the immense facility. Special attention was paid to the enormous American flag and NASA "meatball" insignia. The work repaired visible damage from years of storms and weathering. The flag and logo had been previously repainted in 1998 for NASA's 40th anniversary.[13]

Repair work after Hurricane Frances

The most extensive exterior damage occurred during the storm season of 2004, when Hurricane Frances blew off 850 14 × 6 foot aluminum panels from the building, resulting in about 40,000 square feet (3,700 m2) of new openings in the sides.[13][14] Twenty five additional panels were blown off the east side by the winds from Hurricane Jeanne just three weeks later. Earlier in the season, Hurricane Charley caused significant but less serious damage, estimated to cost $700,000. Damage caused by these hurricanes was still visible in 2007. Some of these panels are "punch-outs", designed to detach from the VAB when a large pressure differential is created on the outside vs. the inside. This allows for equalization, and helps protect the structural integrity of the building during rapid changes in pressure such as in tropical cyclones.

The building has been used as a backdrop in several Hollywood movies including Marooned, SpaceCamp, Apollo 13, Contact, and others.

Future

Discovery in the Vehicle Assembly Building waiting for a ferry flight to Dulles, Virginia, for permanent display at the Smithsonian's National Air and Space Museum.

The Space Shuttle was retired in 2011 after which NASA temporarily (as early as 2012) offered public tours of the VAB. These tours were temporarily discontinued in February 2014 to allow for renovations to take place.[15]

The NASA FY2013 budget included US$143.7 million for Construction of Facilities (CoF) requirements in support of Exploration programs including Space Launch System (SLS) and Multi-Purpose Crew Vehicle (MPCV). NASA began modifying Launch Complex 39 at KSC to support the new SLS in 2014, beginning with major repairs, code upgrades and safety improvements to the Launch Control Center, Vehicle Assembly Building (VAB) and the VAB Utility Annex. This initial work will be required to support any launch vehicle operated from Launch Complex 39 and will allow NASA to begin modernizing the facilities, while vehicle-specific requirements are being developed.[16]

The VAB could be used to some extent for assembly and processing of any future vehicles utilizing Launch Complex 39, in addition to renovations for SLS capabilities. On June 16, 2015, NASA released an announcement for proposals (AFP) seeking interest in using the VAB High Bay 2 and other complex facilities for commercial use in "assembling, integration, and testing of launch vehicles". This move is in line with the intent to migrate KSC towards acting as a spaceport accessible to both government and commercial ventures.[17] On April 21, 2016, NASA announced the selection of Orbital ATK to begin negotiations for High Bay 2. The "potential agreement" includes an existing mobile launcher platform.[18]

Gallery

  • Overview of the VAB and LCC industrial area
    Overview of the VAB and LCC industrial area
  • Close-up photo of the VAB.
    Close-up photo of the VAB.
  • Endeavour on its way into the VAB. At the top of the doorway is the slot for the vertical stabilizer
    Endeavour on its way into the VAB. At the top of the doorway is the slot for the vertical stabilizer
  • View from the rear at 2 miles distance, during early evening. The SLS launch tower and orbiter processing facilities are visible.
    View from the rear at 2 miles distance, during early evening. The SLS launch tower and orbiter processing facilities are visible.
  • Upward interior view of the high bay during SLS renovations
    Upward interior view of the high bay during SLS renovations
Crawler-way and closeup of the building. The Launch Control Center is visible adjacent to the VAB on the left.
Panorama of the reservoir and river where barges carrying rocket components are docked, with the VAB in the background.

References

  1. ^ "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
  2. ^ a b c NASA (1999). "Vehicle Assembly Building". NASA. Retrieved September 23, 2007.
  3. ^ PR Newswire Association LLC (2007). "Groundbreaking Digital Experience for Endeavour Shuttle Launch". PR Newswire Association LLC. Retrieved September 23, 2007.
  4. ^ a b "Vehicle Assembly Building". Emporis.com. Retrieved 2008-08-20.
  5. ^ "VAB Nears Completion". NASA History Program Office. NASA. Retrieved September 25, 2014. The new name, it was felt, would more readily encompass future as well as current programs and would not be tied to the Saturn booster.
  6. ^ America's Spaceport (PDF). NASA. p. 13.
  7. ^ https://www.nasa.gov/content/vehicle-assembly-building-prepared-for-another-50-years-of-service
  8. ^ https://www.nasa.gov/sites/default/files/718659main_VAB.pdf
  9. ^ VAB on Emporis.com
  10. ^ "Vehicle Assembly Building Fact Sheet" (PDF). NASA. NASA. Retrieved January 29, 2018. ... each with a door 456 feet (138.99 m)˜ high. The doors are the largest in the world {{cite web}}: no-break space character in |quote= at position 38 (help)
  11. ^ NASA (2006). "Glossary". NASA. Archived from the original on November 1, 2007. Retrieved October 8, 2009.
  12. ^ "NASA Vehicle Assembly Building's Huge American Flag Flies Again". Retrieved 2009-11-02.
  13. ^ a b Mansfield, Cheryl L. (11 January 2007). "Restoring Old Glory and a Massive Meatball". NASA. Retrieved July 11, 2007.
  14. ^ CNN (September 6, 2004). "Frances tears panels from NASA shuttle hangar". CNN. Retrieved September 23, 2007. {{cite news}}: |author= has generic name (help)
  15. ^ Rocket Renovations Will End Public Tours of NASA's Vehicle Assembly Building
  16. ^ NASA FY13 Budget
  17. ^ NASA Solicits Proposals for Use of Kennedy Space Center's Vehicle Assembly Building High Bay 2
  18. ^ Grinter, Kay (2016-04-18). "NASA Selects Orbital ATK to Begin Negotiations". Retrieved 2016-06-29.

External links

Wikimedia Commons has media related to Vehicle Assembly Building.
Records
Preceded by Tallest Building in Florida
1965–1974
160 m 		Succeeded by
Retrieved from "https://en.wikipedia.org/w/index.php?title=Vehicle_Assembly_Building&oldid=928699382"