Visibility

For other uses, see Visibility (disambiguation).

In meteorology, visibility is a measure of the distance at which an object or light can be clearly discerned. It is reported within surface weather observations and METAR code either in meters or statute miles, depending upon the country. Visibility affects all forms of traffic: roads, sailing and aviation. Meteorological visibility refers to transparency of air: in dark, meteorological visibility is still the same as in daylight for the same air.

Definition

A commercial aircraft flying into the clouds over Los Angeles

ICAO Annex 3 Meteorological Service for International Air Navigation contains the following definitions and note:

a) the greatest distance at which a black object of suitable dimensions, situated near the ground, can be seen and recognized when observed against a bright background;

b) the greatest distance at which lights of 1,000 candelas can be seen and identified against an unlit background.

Note.— The two distances have different values in air of a given extinction coefficient, and the latter b) varies with the background illumination. The former a) is represented by the meteorological optical range (MOR).

Annex 3 also defines Runway Visual Range (RVR) as:

The range over which the pilot of an aircraft on the centre line of a runway can see the runway surface markings or the lights delineating the runway or identifying its centre line.

Foggy morning road

On clear days, Tel Aviv's skyline is visible from the Carmel mountains, 80km north

In extremely clean air in Arctic or mountainous areas, the visibility can be up to 161 kilometres (100 mi) where there are large markers such as mountains or high ridges. However, visibility is often reduced somewhat by air pollution and high humidity. Various weather stations report this as haze (dry) or mist (moist). Fog and smoke can reduce visibility to near zero, making driving extremely dangerous. The same can happen in a sandstorm in and near desert areas, or with forest fires. Heavy rain (such as from a thunderstorm) not only causes low visibility, but the inability to brake quickly due to hydroplaning. Blizzards and ground blizzards (blowing snow) are also defined in part by low visibility.

Derivation

To define visibility the case of a perfectly black object being viewed against a perfectly white background is examined. The visual contrast, C_V(x), at a distance x from the black object is defined as the relative difference between the light intensity of the background and the object

$C_{\text{V}}(x)={\frac {F_{\text{B}}(x)-F(x)}{F_{\text{B}}(x)}}$

where F_B(x) and F(x) are the intensities of the background and the object, respectively. Because the object is assumed to be perfectly black, it must absorb all of the light incident on it. Thus when x=0 (at the object), F(0) = 0 and C_V(0) = 1.

Between the object and the observer, F(x) is affected by additional light that is scattered into the observer's line of sight and the absorption of light by gases and particles. Light scattered by particles outside of a particular beam may ultimately contribute to the irradiance at the target, a phenomenon known as multiple scattering. Unlike absorbed light, scattered light is not lost from a system. Rather, it can change directions and contribute to other directions. It is only lost from the original beam traveling in one particular direction. The multiple scattering's contribution to the irradiance at x is modified by the individual particle scattering coefficient, the number concentration of particles, and the depth of the beam. The intensity change dF is the result of these effects over a distance dx. Because dx is a measure of the amount of suspended gases and particles, the fraction of F that is diminished is assumed to be proportional to the distance, dx. The fractional reduction in F is

$dF=-b_{\text{ext}}Fdx$

where b_ext is the attenuation coefficient. The scattering of background light into the observer's line of sight can increase F over the distance dx. This increase is defined as b' F_B(x) dx, where b' is a constant. The overall change in intensity is expressed as

$dF(x)=\left[b'F_{\text{B}}(x)-b_{\text{ext}}F(x)\right]dx$

Since F_B represents the background intensity, it is independent of x by definition. Therefore,

$dF_{\text{B}}(x)=0=\left[b'F_{\text{B}}(x)-b_{\text{ext}}F_{\text{B}}(x)\right]dx$

It is clear from this expression that b' must be equal to b_ext. Thus, the visual contrast, C_V(x), obeys the Beer–Lambert law

${\frac {dC_{\text{V}}(x)}{dx}}=-b_{\text{ext}}C_{\text{V}}(x)$

which means that the contrast decreases exponentially with the distance from the object:

$C_{\text{V}}(x)=\exp(-b_{\text{ext}}x)$

Lab experiments have determined that contrast ratios between 0.018 and 0.03 are perceptible under typical daylight viewing conditions. Usually, a contrast ratio of 2% (C_V = 0.02) is used to calculate visual range. Plugging this value into the above equation and solving for x produces the following visual range expression (the Koschmieder equation):

$x_{\text{V}}={\frac {3.912}{b_{\text{ext}}}}$

with x_V in units of length. At sea level, the Rayleigh atmosphere has an extinction coefficient of approximately 13.2 × 10⁻⁶ m⁻¹ at a wavelength of 520 nm. This means that in the cleanest possible atmosphere, visibility is limited to about 296 km.

Fog, mist, and haze

The international definition of fog is a visibility of less than 1 kilometre (3,300 ft); mist is a visibility of between 1 kilometre (0.62 mi) and 2 kilometres (1.2 mi) and haze from 2 kilometres (1.2 mi) to 5 kilometres (3.1 mi). Fog and mist are generally assumed to be composed principally of water droplets, haze and smoke can be of smaller particle size; this has implications for sensors such as Thermal Imagers (TI/FLIR) operating in the far-IR at wavelengths of about 10 μm which are better able to penetrate haze and some smokes because their particle size is smaller than the wavelength; the IR radiation is therefore not significantly deflected or absorbed by the particles.

Very low visibility

Visibility of less than 100 metres (330 ft) is usually reported as zero. In these conditions, roads may be closed, or automatic warning lights and signs may be activated to warn drivers. These have been put in place in certain areas that are subject to repeatedly low visibility, particularly after traffic collisions or pile-ups involving multiple vehicles.

Low visibility warnings

In addition, an advisory is often issued by a government weather agency for low visibility, such as a dense fog advisory from the U.S. National Weather Service. These generally advise motorists to avoid travel until the fog dissipates or other conditions improve. Airport travel is also often delayed by low visibility, sometimes causing long waits due to instrument flight rules and wider spacing of aircraft.

Visibility and air pollution

A visibility reduction is probably the most apparent symptom of air pollution. Visibility degradation is caused by the absorption and scattering of light by particles and gases in the atmosphere. Absorption of electromagnetic radiation by gases and particles is sometimes the cause of discolorations in the atmosphere but usually does not contribute very significantly to visibility degradation.

Scattering by particulates impairs visibility much more readily. Visibility is reduced by significant scattering from particles between an observer and a distant object. The particles scatter light from the sun and the rest of the sky through the line of sight of the observer, thereby decreasing the contrast between the object and the background sky. Particles that are the most effective at reducing visibility (per unit aerosol mass) have diameters in the range of 0.1-1.0 µm. The effect of air molecules on visibility is minor for short visual ranges but must be taken into account for ranges above 30 km.

See also

• Coefficient of haze

References

• Seinfeld, John H.; Pandis, Spyros N. (2006). Atmospheric Chemistry and Physics - From Air Pollution to Climate Change (2nd ed.). John Wiley and Sons, Inc. ISBN 0-471-82857-2.