Water of crystallization

From Wikipedia, the free encyclopedia
  (Redirected from Water of hydration)
Jump to: navigation, search

In chemistry, water of crystallization or water of hydration or crystallization water is water that occurs inside crystals. Water is often incorporated in the formation of crystals from aqueous solutions.[1] In some contexts, water of crystallization is the total weight of water in a substance at a given temperature and is mostly present in a definite (stoichiometric) ratio. Classically, "water of crystallization" refers to water that is found in the crystalline framework of a metal complex or a salt, which is not directly bonded to the metal cation.

Upon crystallization from water or moist solvents, many compounds incorporate water molecules in their crystalline frameworks. Water of crystallization can generally be removed by heating a sample but the crystalline properties are often lost. For example, in the case of sodium chloride, the dihydrate is unstable at room temperature.

Coordination sphere of Na+ in the metastable dihydrate of sodium chloride (red = oxygen, violet = Na+, green = Cl, H atoms omitted).[2]

Compared to inorganic salts, proteins crystallize with large amounts of water in the crystal lattice. The water content of 50% is not uncommon for proteins.


In molecular formulas water of crystallization can be denoted in different ways:

  • "hydrated compoundnH2O" or "hydrated compound×nH2O"
This notation is used when the compound only contains lattice water or when the crystal structure is undetermined. For example Calcium chloride: CaCl2·2H2O
  • "hydrated compound(H2O)n"
A hydrate with coordinated water. For example Zinc chloride: ZnCl2(H2O)4

Position in the crystal structure[edit]

Some hydrogen-bonding contacts in FeSO4.7H2O. This metal aquo complex crystallizes with water of hydration, which interacts with the sulfate and with the [Fe(H2O)6]2+ centers.

A salt with associated water of crystallization is known as a hydrate. The structure of hydrates can be quite elaborate, because of the existence of hydrogen bonds that define polymeric structures.[3] [4] Historically, the structures of many hydrates were unknown, and the dot in the formula of a hydrate was employed to specify the composition without indicating how the water is bound. Examples:

  • CuSO4•5H2O - copper(II) sulfate pentahydrate
  • CoCl2•6H2O - cobalt(II) chloride hexahydrate
  • SnCl2•2H2O - tin(II) (or stannous) chloride dihydrate

For many salts, the exact bonding of the water is unimportant because the water molecules are labilized upon dissolution. For example, an aqueous solution prepared from CuSO4•5H2O and anhydrous CuSO4 behave identically. Therefore, knowledge of the degree of hydration is important only for determining the equivalent weight: one mole of CuSO4•5H2O weighs more than one mole of CuSO4. In some cases, the degree of hydration can be critical to the resulting chemical properties. For example, anhydrous RhCl3 is not soluble in water and is relatively useless in organometallic chemistry whereas RhCl3•3H2O is versatile. Similarly, hydrated AlCl3 is a poor Lewis acid and thus inactive as a catalyst for Friedel-Crafts reactions. Samples of AlCl3 must therefore be protected from atmospheric moisture to preclude the formation of hydrates.

Structure of the polymeric [Ca(H2O)6]2+ center in crystalline calcium chloride hexahydrate. Three water ligands are terminal, three bridge. Two aspects of metal aquo complexes are illustrated: the high coordination number typical for Ca2+ and the role of water as a bridging ligand.

Crystals of the aforementioned hydrated copper(II) sulfate consist of [Cu(H2O)4]2+ centers linked to SO42− ions. Copper is surrounded by six oxygen atoms, provided by two different sulfate groups and four molecules of water. A fifth water resides elsewhere in the framework but does not bind directly to copper.[5] The cobalt chloride mentioned above occurs as [Co(H2O)6]2+ and Cl. In tin chloride, each Sn(II) center is pyramidal (mean O/Cl-Sn-O/Cl angle is 83°) being bound to two chloride ions and one water. The second water in the formula unit is hydrogen-bonded to the chloride and to the coordinated water molecule. Water of crystallization is stabilized by electrostatic attractions, consequently hydrates are common for salts that contain +2 and +3 cations as well as −2 anions. In some cases, the majority of the weight of a compound arises from water. Glauber's salt, Na2SO4(H2O)10, is a white crystalline solid with greater than 50% water by weight.

Consider the case of nickel(II) chloride hexahydrate. This species has the formula NiCl2(H2O)6. Crystallographic analysis reveals that the solid consists of [trans-NiCl2(H2O)4] subunits that are hydrogen bonded to each other as well as two additional molecules of H2O. Thus 1/3 of the water molecules in the crystal are not directly bonded to Ni2+, and these might be termed "water of crystallization".


The water content of most compounds can be determined with a knowledge of its formula. An unknown sample can be determined through thermogravimetric analysis (TGA) where the sample is heated strongly, and the accurate weight of a sample is plotted against the temperature. The amount of water driven off is then divided by the molar mass of water to obtain the number of molecules of water bound to the salt.

Other solvents of crystallization[edit]

Water is particularly common solvent to be found in crystals because it is small and polar. But all solvents can be found in some host crystals. Water is noteworthy because it is reactive, whereas other solvents such as benzene are considered to be chemically innocuous. Occasionally more than one solvent is found in a crystal, and often the stoichiometry is variable, reflected in the crystallographic concept of "partial occupancy." It is common and conventional for a chemist to "dry" a sample with a combination of vacuum and heat "to constant weight."

For other solvents of crystallization, analysis is conveniently accomplished by dissolving the sample in a deuterated solvent and analyzing the sample for solvent signals by NMR spectroscopy. Single crystal X-ray crystallography is often able to detect the presence of these solvents of crystallization as well. Other methods may be currently available.

Table of crystallization water in some inorganic halides[edit]

In the table below are indicated the number of molecules of water per metal in various salts.[6][7]

Formula of
hydrated metal halides
sphere of the metal
Equivalents of water of crystallization
that are not bound to M
CaCl2(H2O)6 [Ca(μ-H2O)6(H2O)3]2+ none Case of water as a bridging ligand[8]
VCl3(H2O)6 trans-[VCl2(H2O)4]+ two
VBr3(H2O)6 trans-[VBr2(H2O)4]+ two bromides and chlorides are usually similar
VI3(H2O)6 [V(H2O)6]3+ none iodide competes poorly with water
CrCl3(H2O)6 trans-[CrCl2(H2O)4]+ two dark green isomer, aka "Bjerrums's salt"
CrCl3(H2O)6 [CrCl(H2O)5]2+ one blue-green isomer
CrCl2(H2O)4 trans-[CrCl2(H2O)4] none square planar/tetragonal distortion
CrCl3(H2O)6 [Cr(H2O)6]3+ none [9]
AlCl3(H2O)6 [Al(H2O)6]3+ none isostructural with the Cr(III) compound
MnCl2(H2O)6 trans-[MnCl2(H2O)4] two
MnCl2(H2O)4 cis-[MnCl2(H2O)4] none cis molecular, the unstable trans isomer has also been detected[10]
MnBr2(H2O)4 cis-[MnBr2(H2O)4] none cis, molecular
MnCl2(H2O)2 trans-[MnCl4(H2O)2] none polymeric with bridging chloride
MnBr2(H2O)2 trans-[MnBr4(H2O)2] none polymeric with bridging bromide
FeCl2(H2O)6 trans-[FeCl2(H2O)4] two
FeCl2(H2O)4 trans-[FeCl2(H2O)4] none molecular
FeBr2(H2O)4 trans-[FeBr2(H2O)4] none molecular
FeCl2(H2O)2 trans-[FeCl4(H2O)2] none polymeric with bridging chloride
FeCl3(H2O)6 trans-[FeCl2(H2O)4] two only hydrate of ferric chloride, isostructural with Cr analogue
CoCl2(H2O)6 trans-[CoCl2(H2O)4] two
CoBr2(H2O)6 trans-[CoBr2(H2O)4] two
CoI2(H2O)6 [Co(H2O)6]2+ none[11] iodide competes poorly with water
CoBr2(H2O)4 trans-[CoBr2(H2O)4] none molecular
CoCl2(H2O)4 cis-[CoCl2(H2O)4] none note: cis molecular
CoCl2(H2O)2 trans-[CoCl4(H2O)2] none polymeric with bridging chloride
CoBr2(H2O)2 trans-[CoBr4(H2O)2] none polymeric with bridging bromide
NiCl2(H2O)6 trans-[NiCl2(H2O)4] two
NiCl2(H2O)4 cis-[NiCl2(H2O)4] none note: cis molecular
NiBr2(H2O)6 trans-[NiBr2(H2O)4] two
NiI2(H2O)6 [Ni(H2O)6]2+ none[11] iodide competes poorly with water
NiCl2(H2O)2 trans-[NiCl4(H2O)2] none polymeric with bridging chloride
CuCl2(H2O)2 [CuCl4(H2O)2]2 none tetragonally distorted
two long Cu-Cl distances
CuBr2(H2O)4 [CuBr4(H2O)2]n two tetragonally distorted
two long Cu-Br distances

Hydrates of transition metal sulfates[edit]

Transition metal sulfates form mono-, tetra-, and pentahydrates, each of which crystallizes in only one form. The water in these salts typically is coordinated, together with sulfate to the metal center. The sulfates of these same metals also crystallize as both tetragonal and monoclinic hexahydrates, wherein all water is coordinated and the sulfate is a counterion. The heptahydrates, which are often the most common salts, crystallize as monoclinic and the less common orthorhombic forms. In the heptahydrates, one water is in the lattice and the other six are coordinated to the ferrous center.[12] Cr2(SO4)3.18H2O

Formula of
hydrated metal sulfate
sphere of the metal
Equivalents of water of crystallization
that are not bound to M
Cr2(SO4)3(H2O)18 [Cr(H2O)6]6+ six one of several chromium(III) sulfates
MnSO4(H2O) unknown unknown one of several manganese(II) sulfates
FeSO4(H2O)7 [Fe(H2O)6]2+ one Common motif for divalent metal sulfates
CoSO4(H2O)7 [Co(H2O)6]2+ one Common motif for divalent metal sulfates
NiSO4(H2O)7 [Ni(H2O)6]2+ one Common motif for divalent metal sulfates
NiSO4(H2O)6 [Ni(H2O)6]2+ none one of several nickel sulfate hydrates[13]
CuSO4(H2O)5 [Cu(H2O)4(SO4)] one sulfate is bridging ligand[14]
CdSO4(H2O) Cd(H2O)SO4 none bridging water ligand[15]


See also[edit]


  1. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 0-08-037941-9. 
  2. ^ Klewe, B.; Pedersen, B. (1974). "The crystal structure of sodium chloride dihydrate". Acta Cryst. B30: 2363–2371. doi:10.1107/S0567740874007138. 
  3. ^ Yonghui Wang et al. "Novel Hydrogen-Bonded Three-Dimensional Networks Encapsulating One-Dimensional Covalent Chains: ..." Inorg. Chem., 2002, 41 (24), pp. 6351–6357. doi:10.1021/ic025915o
  4. ^ Carmen R. Maldonadoa, Miguel Quirós and J.M. Salas: "Formation of 2D water morphologies in the lattice of the salt..." Inorganic Chemistry Communications Volume 13, Issue 3, March 2010, p. 399–403; doi:10.1016/j.inoche.2009.12.033
  5. ^ Moeller, Therald (Jan 1, 1980). Chemistry: With Inorganic qualitative Analysis. Academic Press Inc (London) Ltd. p. 909. ISBN 0-12-503350-8. Retrieved 15 June 2014. 
  6. ^ K. Waizumi, H. Masuda, H. Ohtaki, "X-ray structural studies of FeBr24H2O, CoBr24H2O, NiCl2 4H2O, and CuBr24H2O. cis/trans Selectivity in transition metal(I1) dihalide Tetrahydrate" Inorganica Chimica Acta, 1992 volume 192, pages 173–181.
  7. ^ B. Morosin "An X-ray diffraction study on nickel(II) chloride dihydrate" Acta Crystallogr. 1967. volume 23, pp. 630-634. doi:10.1107/S0365110X67003305
  8. ^ Agron, P.A.; Busing, W.R. "Calcium and strontium dichloride hexahydrates by neutron diffraction" Acta Crystallographica, Section C: Crystal Structure Communications 1986, volume 42, pp. 141-p1.
  9. ^ violet isomer. isostructural with aluminium compound.Andress, K.R.; Carpenter, C. "Kristallhydrate. II.Die Struktur von Chromchlorid- und Aluminiumchloridhexahydrat" Zeitschrift für Kristallographie, Kristallgeometrie, Kristallphysik, Kristallchemie 1934, volume 87, p446-p463.
  10. ^ Zalkin, Allan; Forrester, J. D.; Templeton, David H. (1964). "Crystal structure of manganese dichloride tetrahydrate". Inorganic Chemistry. 3: 529–33. doi:10.1021/ic50014a017. 
  11. ^ a b "Structure Cristalline et Expansion Thermique de L’Iodure de Nickel Hexahydrate" (Crystal structure and thermal expansion of nickel(II) iodide hexahydrate) Louër, Michele; Grandjean, Daniel; Weigel, Dominique Journal of Solid State Chemistry (1973), 7(2), 222-8. doi: 10.1016/0022-4596(73)90157-6
  12. ^ Baur, W.H. "On the crystal chemistry of salt hydrates. III. The determination of the crystal structure of FeSO4(H2O)7 (melanterite)" Acta Crystallographica 1964, volume 17, p1167-p1174. doi:10.1107/S0365110X64003000
  13. ^ Stadnicka, K.; Glazer, A.M.; Koralewski, M. "Structure, absolute configuration and optical activity of alpha-nickel sulfate hexahydrate" Acta Crystallographica, Section B: Structural Science (1987) 43, p319-p325.
  14. ^ V. P. Ting, P. F. Henry, M. Schmidtmann, C. C. Wilson, M. T. Weller "In situ neutron powder diffraction and structure determination in controlled humidities" Chem. Commun., 2009, 7527-7529. doi:10.1039/B918702B
  15. ^ Theppitak, Chatphorn; Chainok, Kittipong "Crystal structure of CdSO4(H2O): A Redetermination" Acta Crystallographica, Section E. Structure Reports Online 2015, volume 71, pi8-pi9. doi:10.1107/S2056989015016904