Wiesen Viaduct
Wiesen Viaduct Wiesener Viadukt | |
|---|---|
 A RhB Ge 4/4 II with a push-pull train crossing the viaduct. | |
| Coordinates | 46°41′40″N 09°42′46″E / 46.69444°N 9.71278°E |
| Carries | Rhaetian Railway |
| Crosses | Albula River |
| Locale | Wiesen Switzerland |
| Official name | Wiesener Viadukt |
| Owner | Rhaetian Railway |
| Maintained by | Rhaetian Railway |
| Characteristics | |
| Design | Arch bridge, Viaduct |
| Material | Limestone |
| Total length | 204 m (669 ft) |
| Height | 88 m (289 ft) |
| Longest span | 55 m (180 ft) |
| No. of spans | 7 |
| History | |
| Construction start | October 1906 |
| Opened | 1909 |
| Location | |
 | |
The Wiesen Viaduct (or Wiesener Viaduct; Template:Lang-de) is a single track limestone railway viaduct. It spans the Landwasser River southwest of the hamlet of Wiesen, in the Canton of Graubünden, Switzerland.
Designed by the then Chief Engineer of the Rhaetian Railway, Henning Friedrich, it was built between 1906 and 1909 under the supervision of another engineer, Hans Studer. The Rhaetian Railway still owns and uses it today.
An important element of the Davos–Filisur railway, the viaduct is 88 metres (289 ft) high, 204 metres (669 ft) long, and has a main span of 55 metres (180 ft).
Location
The Wiesen Viaduct forms part of the Davos–Filisur railway section between Wiesen and Filisur. Just 300 metres (980 ft) southwest of Wiesen railway station, it has, on its south side, a separate pedestrian bridge giving hikers access to Filisur. At the western end of the viaduct is a non functioning Hippsche turning wheel.
History
The Wiesen Viaduct structure was designed by the then Chief Engineer of the Rhaetian Railway, Henning Friedrich. Construction began in October 1906, under the direction of another engineer, Hans Studer. With the launch of the Davos–Filisur railway in July 1909, the viaduct came into operation. It cost a total of 324,000 Swiss francs to build.
The falsework used for the building of the viaduct was designed by G. Marasi, swallowed up around 500 cubic metres (18,000 cu ft) of wood, and was constructed by the Graubünden carpenter Richard Coray.
In 1926, the viaduct was the inspiration for Ernst Ludwig Kirchner's painting Brücke bei Wiesen.
Technical data
The Wiesen Viaduct is 88 metres (289 ft) high and 204 metres (669 ft) long. Its main span is only 3.7 metres (12 ft) in width, but also 55 metres (180 ft) long, which makes it one of the longest main spans of any masonry bridge.
To the west of the main span are two arches, each 20 metres (66 ft) long. East of the main span are four arches, each of them also 20 metres (66 ft) long.
These technical characteristics combine to make the Wiesen Viaduct the Rhaetian Railway's largest stone bridge.
Gallery
-
-
A push-pull train from Filisur crosses the viaduct. -
View of the viaduct in summer. -
View from the Jenisbergstrasse towards the viaduct -
Ernst Ludwig Kirchner: Brücke bei Wiesen.
See also
- Bernina Express
- Arch bridge
- Viaduct
- Wiesen (Rhaetian Railway station)
- Filisur (Rhaetian Railway station)
- Davos–Filisur railway
- Rhaetian Railway
References
- See the references in Wiesener Viadukt (de Wikipedia) Template:De-icon
External links
Media related to Wiesen Viaduct at Wikimedia Commons
- "Wiesener Viadukt". brueckenweb.de (in German).
- Wiesen Viaduct at Structurae
