Jump to content

Wiesen Viaduct

Coordinates: 46°41′40″N 09°42′46″E / 46.69444°N 9.71278°E / 46.69444; 9.71278
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by ZH8000 (talk | contribs) at 10:32, 8 March 2016 (Undid revision 708779895 by 188.247.79.97 (talk)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Wiesen Viaduct

Wiesener Viadukt
Wiesen Viaduct.
A RhB Ge 4/4 II with a push–pull train crossing the viaduct.
Coordinates46°41′40″N 09°42′46″E / 46.69444°N 9.71278°E / 46.69444; 9.71278
CarriesRhaetian Railway
CrossesAlbula
LocaleWiesen Switzerland
Official nameWiesener Viadukt
OwnerRhaetian Railway
Maintained byRhaetian Railway
Characteristics
DesignArch bridge, Viaduct
MaterialLimestone
Total length204 m (669 ft)
Height88 m (289 ft)
Longest span55 m (180 ft)
No. of spans7
History
Construction startOctober 1906
Opened1909
Location
Map

The Wiesen Viaduct (or Wiesener Viaduct; Template:Lang-de) is a single track limestone railway viaduct. It spans the Landwasser southwest of the hamlet of Wiesen, in the Canton of Graubünden, Switzerland.

Designed by the then chief engineer of the Rhaetian Railway, Henning Friedrich, it was built between 1906 and 1909 under the supervision of another engineer, Hans Studer. The Rhaetian Railway still owns and uses it today.

An important element of the Davos–Filisur railway, the viaduct is 88 metres (289 ft) high, 204 metres (669 ft) long, and has a main span of 55 metres (180 ft).

Location

The Wiesen Viaduct forms part of the Davos–Filisur railway section between Wiesen and Filisur. Just 300 metres (980 ft) southwest of Wiesen railway station, it has, on its south side, a separate pedestrian bridge giving hikers access to Filisur. At the western end of the viaduct is a non functioning Hippsche turning wheel.

History

The Wiesen Viaduct structure was designed by the then Chief Engineer of the Rhaetian Railway, Henning Friedrich. Construction began in October 1906, under the direction of another engineer, Hans Studer. With the launch of the Davos–Filisur railway in July 1909, the viaduct came into operation. It cost a total of 324,000 Swiss francs to build.

The falsework used for the building of the viaduct was designed by G. Marasi, swallowed up around 500 cubic metres (18,000 cu ft) of wood, and was constructed by the Graubünden carpenter Richard Coray.

In 1926, the viaduct was the inspiration for Ernst Ludwig Kirchner's painting Brücke bei Wiesen.

Technical data

The Wiesen Viaduct is 88 metres (289 ft) high and 204 metres (669 ft) long. Its main span is only 3.7 metres (12 ft) wide, but also 55 metres (180 ft) long, which makes it one of the longest main spans of any masonry bridge.

To the west of the main span are two arches, each 20 metres (66 ft) long. East of the main span are four more arches, each of them also 20 metres (66 ft) long.

These technical characteristics combine to make the Wiesen Viaduct the Rhaetian Railway's largest stone bridge.

See also

References

Media related to Wiesen Viaduct at Wikimedia Commons

  • "Wiesener Viadukt". brueckenweb.de (in German).
  • Wiesen Viaduct at Structurae