|Availability||500 BC – present|
A yo-yo is played by holding the free end of the string known as the handle (by inserting one finger—usually the middle or index finger—into a slip knot) allowing gravity (or the force of a throw and gravity) to spin the yo-yo and unwind the string (similar to how a pullstring works). The player then allows the yo-yo to wind itself back to the player's hand, exploiting its spin (and the associated rotational energy). This is often called "yo-yoing".
In the simplest play, the string is intended to be wound on the spool by hand; The yo-yo is thrown downwards, hits the end of the string, then winds up the string toward the hand, and finally the yo-yo is grabbed, ready to be thrown again. One of the most basic tricks is called the sleeper, where the yo-yo spins at the end of the string for a noticeable amount of time before returning to the hand.
A Greek vase painting from 440 BC shows a boy playing with a yo-yo (see right). Greek records from the period describe toys made out of wood, metal, or painted terra cotta (fired clay). The terra cotta disks were used to ceremonially offer the toys of youth to certain gods when a child came of age—discs of other materials were used for actual play.
First yo-yo company
In 1928, Pedro Flores, a Filipino immigrant to the United States, opened the Yo-yo Manufacturing Company in Santa Barbara, California. The business started with a dozen handmade toys; by November 1929, Flores was operating two additional factories in Los Angeles and Hollywood, which altogether employed 600 workers and produced 300,000 units daily.
The principal distinction between the Filipino design popularized by Flores and more primitive yo-yos is in the way the yo-yo is strung. In older (and some remaining inexpensive) yo-yo designs, the string is tied to the axle using a knot. With this technique, the yo-yo just goes back-and-forth; it returns easily, but it is impossible to make it sleep. In Flores's design, one continuous piece of string, double the desired length, is twisted around something to produce a loop at one end which is fitted around the axle. Also termed a looped slip-string, this seemingly minor modification allows for a far greater variety and sophistication of motion, thanks to increased stability and suspension of movement during free spin.
Shortly thereafter (c. 1929), an entrepreneur named Donald F. Duncan recognized the potential of this new fad and purchased the Flores yo-yo Corporation and all its assets, including the Flores name, which was transferred to the new company in 1932.
The name "Yo-yo" was registered in 1932 as a trademark by Sam Dubiner [he] in Vancouver, Canada, and Harvey Lowe won the first World Yo-Yo Contest in London, England. In 1932, Swedish Kalmartrissan yo-yos started to be manufactured as well.
In a trademark case in 1965, a federal court's appeals ruled in favor of the Royal Tops Company, determining that yo-yo had become a part of common speech and that Duncan no longer had exclusive rights to the term. As a result of the expenses incurred by this legal battle as well as other financial pressures, the Duncan family sold the company name and associated trademarks in 1968 to Flambeau, Inc, which had manufactured Duncan's plastic models since 1955. As of 2014[update], Flambeau Plastics continued to run the company.
Rise of the ball bearing
As popularity spread through the 1970s and 1980s, there were a number of innovations in yo-yo technology, primarily regarding the connection between the string and the axle. In 1979, dentist and yo-yo celebrity Tom Kuhn patented the “No Jive 3-in-1” yo-yo, creating the world's first "take-apart" yo-yo, which enabled yo-yo players to change the axle.
Swedish bearing company SKF briefly manufactured novelty yo-yos with ball bearings in 1984. In 1990, Kuhn introduced the SB-2 yo-yo that had an aluminum transaxle, making it the first successful ball-bearing yo-yo.
In all transaxle yo-yos, ball bearings significantly reduce friction when the yo-yo is spinning, enabling longer and more complex tricks. Subsequent yo-yoers used this ability to their advantage, creating new tricks that had not been possible with fixed-axle designs.
There are many new types of ball bearings in the market which deviate from the original design and/or material of the standard stainless steel ball bearing. For example, a certain type of bearing has an inward facing curved surface, to prevent the string from rubbing on the sides of the yo-yo, which would cause unwanted friction when performing intricate string tricks. Other manufacturers replicate this with a similar inwardly curved surface, but use minor modifications. Some high-end bearings use ceramic composites in the balls of the bearing, to reduce internal friction, again making for a smoother spinning yo-yo.
The sleeper is one of the most common yo-yo throws and is the basis for nearly all yo-yo throws other than looping. Keeping a yo-yo spinning while remaining at the end of its uncoiled string is known as sleeping. While the yo-yo is in the "sleeping" state at the end of the string, one can then execute tricks like "walk the dog", "around the world", or the more complex "rock the baby".
The essence of the throw is that one throws the yo-yo with a very pronounced wrist action so that when the yo-yo reaches the end of the string it spins in place rather than rolling back up the string to the thrower's hand. Most modern yo-yos have a transaxle or ball bearing to assist this, but if it is a fixed axle yo-yo, the tension must be loose enough to allow this. The two main ways to do this are (1), allow the yo-yo to sit at the bottom of the string to unwind, or (2) perform lariat or UFO to loosen the tension. When one decides to end the "sleeping" state, one merely jerks the wrist and the yo-yo "catches" the string and rolls back up to the hand. Ball-bearing yo-yos with a "butterfly" shape, primarily used for string tricks, frequently (but not always) have the low response (or are, in fact, completely unresponsive), requiring a "bind" for the yo-yo to return.
In competition, mastery of sleeping is the basis for the 1A division. Inexpensive fixed-axle yo-yos usually spin between 10–20 seconds, while the expensive ball bearing yo-yos can spin about 1–4 minutes depending on the throw  As of 2010[update], the world record sleep times were 3:51.54 minutes for fixed-axle and 21:15.17 minutes for transaxle yo-yos. In 2012, the transaxle yo-yo sleep time record was broken by the C3YoyoDesign BTH, with a time of 30:28.30 minutes.
Looping is a yo-yo technique which emphasizes keeping the body of the yo-yo in constant motion, without sleeping.
Yo-yos optimized for looping have weight concentrated in their centers so they may easily rotate about the string's axis without their mass contributing to resistance due to a gyroscopic effect. also, known as 2A or two hands looping freestyle
In yo-yo competitions, looping both to the inside and outside of the hand with the yo-yo plays a strong role in the 2A division.
Two handed string tricks
Two handed or 3A style play involves doing string tricks with two flared bearing yo-yos. Popularized and pioneered by Mark McBride, the first modern Triple A trick appeared in Fiend Magazine and was called the Velvet Rolls. The different mounts in this style are referred to as houses (e.g. "Kink House").
Photos from as early as the late 1950s show early yo-yo demonstrators performing very basic Triple A tricks, such as a Sleeper with one hand, and a Trapeze with the other. While Triple A as a concept has existed for many years, it was not until the debut of Velvet Rolls that development began on what is currently considered Triple A.
In competition, two handed string tricks have the 3A division.
In the "off-string" technique, the yo-yo's string is not tied directly to the yo-yo's axle, and the yo-yo is usually launched into the air by performing a "forward pass" to be caught again on the string. However, some players can 'throw down' off-string yo-yos and catch it on the string just as it leaves the end of the string by pivoting the string around a finger as it unwinds, so that the yo-yo is caught on the string. This is exactly the opposite of a "forward pass", but with the same result.
Yo-yos optimized for off-string tricks have flared designs, like the butterfly shape, which makes it easier to land on the string, and often have soft rubber rings on the edges, so minimum damage is inflicted on the yo-yo, the player, or anyone who happens to be standing nearby, should a trick go wrong.
Yo-yo competitions have the 4A division for off-string tricks.
In freehand (5A) tricks, the yo-yo's string is not tied to the player's hand, instead ending in a counterweight. The counterweight is then thrown from hand to hand and used as an additional element in the trick.
Developed in 1999 by Steve Brown, as of 2008 freehand is considered to be the fastest-growing style of yo-yo play. Steve Brown was awarded a patent on his freehand yo-yo system, which was assigned to Flambeau Products (Duncan's parent company).
In yo-yo competitions, counterweight yo-yos are emphasized in the 5A division.
When the yo-yo is first released, the gravity (and the throw) give it translational kinetic energy and necessarily, since the string must unwind, much of this energy is converted into rotational kinetic energy establishing the free move of the yo-yo, and causing it to spin rapidly. As the yo-yo unwinds downwards, it also converts potential energy from gravity to both translational and rotational kinetic energy. Because the yo-yo has significant rotational inertia, it can store enough energy in its rotation to overcome gravity all the way back up to the hand.
Because the sense of spinning does not change during the whole move, the string winds up in the opposite direction upon the return of the yo-yo. If the shaft of the yo-yo is connected to the string with a loop, there may not be enough frictional force to overcome the weight of the yo-yo, which is necessary to begin winding up the string. In this case, the yo-yo will continue to spin in the loop at the end of the string (or sleep), just being slightly braked by the small dynamic friction, instead of returning. However, if the string is jerked slightly up, this will increase the force from the string on the shaft, thereby rising the boundary for static friction, proportional to the "weight" of the yo-yo, above the current frictional force, making it static friction, thereby forcing the rotational energy of the yo-yo to wind up the string and finish the rest of the return.
- "Definition of YO-YO". www.merriam-webster.com. Retrieved 2018-09-25.
- Miller, Stephen G. (2004). Ancient Greek Athletics. Yale University Press. pp. 169–. ISBN 9780300115291. Retrieved 19 March 2013.
- Pedro Flores, National Yo-Yo Museum, archived from the original on January 20, 2008, retrieved 2008-02-18
- Online Etymology Dictionary. Etymonline.com. Retrieved on 2012-04-09.
- Hopkins, Michelle (2009-04-19). "'Great ambassador' passes away". Richmond News. Archived from the original on 2009-08-30. Retrieved 2009-04-12.
- "Kalmartrissan" och andra "trissor" Archived 2010-08-21 at the Wayback Machine, County Museum of Kalmar (in Swedish)
- "Kalmartrissan snurrar vidare", Dagens Nyheter 19 December 2012 (not available in the on-line edition) (in Swedish)
- Kalmartrissan fyller 70 år, Sveriges radio, 25 January 2002, retrieved 22 March 2013 (in Swedish)
- "YO–YO BANNED IN SYRIA". Barrier Miner. Sydney, Australia. 23 Jan 1933. Retrieved 8 July 2018.
- Classic Toys: The Yo-Yo. Retro Planet (2009-05-12). Retrieved on 2012-04-09.
- Yo-Yo Basics, howstuffworks.com.
- American Yo-Yo Association website.
- Science News, Week of April 17, 2004; Vol. 165, No. 16, p. 250 Archived April 20, 2008, at the Wayback Machine
- U.S. Patent 6,331,132 Filed July 27, 1999; Issued December 18, 2001
- U.S. Patent 7,192,330 Filed October 29, 1999; Issued December 19, 2000