Torsion pendulum clock
A torsion pendulum clock, or torsion clock (also known as 400-day or anniversary clock), is a mechanical clock which keeps time with a mechanism called a torsion pendulum. This is a weighted disk or wheel, often a decorative wheel with 3 or 4 chrome balls on ornate spokes, suspended by a thin wire or ribbon called a torsion spring. The torsion pendulum rotates about the vertical axis of the wire, twisting it, instead of swinging like an ordinary pendulum. The force of the twisting torsion spring reverses the direction of rotation, so the torsion pendulum oscillates slowly, clockwise and counterclockwise. The clock's gears apply a pulse of torque to the top of the torsion spring each rotation to keep the wheel going. The wheel and torsion spring function similarly to a watch's balance wheel and hairspring, as a harmonic oscillator to control the rate of the clock's hands.
Torsion clocks are usually delicate, ornamental, spring-wound mantel clocks. The polished clock mechanism is exposed under a glass case or dome, to allow people to watch the torsion pendulum turn. Clocks of this style, first made by Anton Harder around 1880, are also known as 400-day or anniversary clocks, because many of them only have to be wound once a year or longer (some have been made that will go for up to 1000 days on a single winding).
Torsion clocks are capable of running much longer between windings than clocks with an ordinary pendulum, because the torsion pendulum rotates slowly and takes little energy. However they are difficult to set up and are usually not as accurate as clocks with ordinary pendulums. One reason is that the oscillation period of the torsion pendulum changes with temperature due to temperature-dependent change in elasticity of the spring. The rate of the clock can be made faster or slower by an adjustment screw mechanism on the torsion pendulum that moves the weight balls in or out from the axis. The closer in the balls are, the smaller the moment of inertia of the torsion pendulum and the faster it will turn, like a spinning ice skater who pulls in her arms. This causes the clock to speed up.
One oscillation of the torsion pendulum usually takes 12, 15, or 20 seconds. The escapement mechanism, that changes the rotational motion of the clock's gears to pulses to drive the torsion pendulum, works rather like an anchor escapement. A crutch device at the top of the torsion spring engages a lever with two anchor-shaped arms; the arms in turn alternately engage the teeth of the escape wheel. As the anchor releases a tooth of the escape wheel, the lever, which is fixed to the anchor, moves to one side and, via the crutch, gives a small twist to the top of the torsion spring. This is just enough to keep the oscillation going.
The Atmos clock, made by Jaeger Le Coultre, is a type of torsion clock which doesn't need to be wound or powered at all. The mainspring which turns the clock's wheels is kept wound by small changes in atmospheric pressure and/or local temperature, using a bellows mechanism. Thus no winding key or battery is needed, and it can run for years without human intervention.
The torsion pendulum was invented by Robert Leslie in 1793. The torsion pendulum clock was first invented and patented by American Aaron Crane in 1841. He made clocks that would run up to one year on a winding. He also attempted to make precision astronomical regulator clocks based on the torsion pendulum, but only four sold.
The German Anton Harder apparently independently invented and patented the torsion clock in 1879-1880. He was inspired by watching a hanging chandelier rotate after a servant had turned it to light the candles. He formed the firm Jahresuhrenfabrik ('Year Clock Factory') and designed a clock that would run for a year, but its accuracy was bad. He sold the patent in 1884 to F. A. L. deGruyter of Amsterdam, who allowed the patent to expire in 1887. Other firms entered the market, beginning the German mass production of these clocks.
Although they were successful commercially, torsion clocks remained poor timekeepers. In 1951, Charles Terwilliger of the Horolovar Co. invented a temperature compensating suspension spring, which allowed fairly accurate clocks to be made.
- "Four Hundred Day Clock". Encyclopedia of Antiques. Old and Sold Antique Marketplace. Retrieved 2008-04-20.
- Hubby, John (08:44:46 16 Jan 2007). "Horolovar Springs-Hooks Law". 400-Day, Atmos and other Torsion Clocks, NAWCC mailing list. http://www.nawcc-mb.com/bbv2/bbBoard.cgi?a=viewthread;fid=7;gtid=11816;pagenumber=2.
- "Torsion Pendulum". Encyclopedia of Antiques. Old and Sold Antique Marketplace. Retrieved 2008-04-20.
- Connolly, John (2007). "History of Torsion Suspension Clocks". Clocks Canada. Retrieved 2008-06-01.
- International 400-day Clock Chapter #168, NAWCC, retrieved Aug. 30, 2007. Torsion clock branch of large clock collectors club. Publishes quarterly journal Torsion Times.
- Torsion clock gallery, Horology Web Ring, webhorology.com, retrieved Aug. 30, 2007. Pictures of torsion clocks from several private collections.
- Torsion clock collection, Battersea Clock Home, Flickr.com, retrieved Aug. 29, 2007. Pictures of a collection of 30 anniversary clocks in London, UK.
- The Danish Telavox (later Clementa) battery driven torsion pendulum clock. A collector's guide illustrating the history and varieties of cases and movements from 1942-1977 (?).