Jump to content

Buckling spring

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Voidxor (talk | contribs) at 01:41, 17 October 2022 (I seem to have cut and pasted back to the original position by mistake...). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Unicomp Model M with removed z key. The exposed buckling spring is visible.
IMB Model F (left) and Model M (right) keyboard springs

A buckling spring is a type of keyswitch mechanism, popularized by IBM's keyboards for the PC, PC/AT, 5250/3270 terminals, PS/2, and other systems. It was used by IBM's Model F keyboards (for instance the AT keyboard), and the more common Model M. It is described in U.S. patent 4,118,611 (Model F) and U.S. patent 4,528,431 (Model M), both now expired.

Operation

The coil spring tensed between the keycap and a pivoting hammer buckles (i.e. kinks or collapses) at a certain point in its downward traverse, providing auditory and tactile feedback to the keyboard operator. Upon buckling, the hammer is pivoted forward by the spring and strikes an electrical contact which registers the key press. In a Model M, the electrical contact is a membrane sheet similar to that of a modern dome switch keyboard.

See also

References