Jump to content

File:411th Engineer Brigade SSI.svg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (SVG file, nominally 190 × 190 pixels, file size: 2 KB)

 
W3C-validity not checked.
Description

Shoulder Sleeve Insignia of the 411th Engineer Brigade.

Description
  • A square 2 inches (5.08cm) in length on each side with one point up and a white border 1/8 inch (.32cm) in width enclosing a scarlet field divided vertically by a white bar indented on both sides between two white right angles, their apexes coincident with the center indentations of the vertical bar, and their legs terminating at the border.
Symbolism
  • Scarlet and white are the colors used for the Corps of Engineers. The sawtoothed bar at center and the right angles are suggestive of the construction mission of the unit. The X-shape formed by the two right angles refers to the military symbol for a brigade. The unit's numerical designation is roughly indicated by the four sides of the square, with a Roman numeral XI formed by the two right angles and the vertical bar at center.
Background
  • The shoulder sleeve insignia was approved on 20 Dec 1973.
Date
Source Own work, after the Army Institute of Heraldry.
Author Fvasconcellos (talk · contribs)
Permission
(Reusing this file)
Public domain
This image shows a flag, a coat of arms, a seal or some other official insignia produced by the United States Army Institute of Heraldry. It is in the public domain but its use is restricted by Title 18, United States Code, Section 704 [1] and the Code of Federal Regulations (32 CFR, Part 507) [2], [3]. Permission to use these images in the USA for most commercial purposes must be obtained from The Institute of Heraldry prior to their use.

Deutsch ∙ English ∙ فارسی ∙ 日本語 ∙ русский ∙ +/−

Insignia This image shows a flag, a coat of arms, a seal or some other official insignia. The use of such symbols is restricted in many countries. These restrictions are independent of the copyright status.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

inception

14 May 2008

media type

image/svg+xml

checksum

e7a8f1d719b9b673b2b92ed2101e446448e49dfe

determination method or standard: SHA-1

data size

1,647 byte

height

190 pixel

width

190 pixel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current15:45, 14 May 2008Thumbnail for version as of 15:45, 14 May 2008190 × 190 (2 KB)Fvasconcelloscolors
14:58, 14 May 2008Thumbnail for version as of 14:58, 14 May 2008190 × 190 (2 KB)Fvasconcellos{{validSVG}} {{Information |Description=Shoulder Sleeve Insignia of the w:411th Engineer Brigade (United States). ;Description *''A square 2 inches (5.08cm) in length on each side with one point up and a whi

Global file usage

The following other wikis use this file:

Retrieved from "https://en.wikipedia.org/wiki/File:411th_Engineer_Brigade_SSI.svg"