On January 27th, 2006, I, pschemp created this picture by putting a few of my dichroic beads on my HP scanner and scanning them at 1200 dpi. The process took apporximatley 2 minutes and 3.14159 seconds. Then, the image was transferred via USB cable to my Dell Inspirion 4500 and appeared in Paint Shop Pro. Paint Shop Pro was used to sharpen the image since my scanner puts funny lines on scans at this resolution. The shadows seen on the picture are due to the fact that the object in question was not flat, but three dimensional; thus the scanner lid could not be closed all the way to block out ambient light entirely. The bead in question was then made into a necklace, however the entire operation was carried out while I wore blue jeans, socks with a red stripe, flowered knickers, a brassiere and a pink T-shirt made of 100% cotton knit. My hair was put up in a bun and I was wearing silver earrings, but no makeup. The ambient temperature was 70 degrees Fahrenheit and the relative humidity 35% in my room at the time. Outside, it was a chilly 18 degrees with wind gusts of 20-25 mph and clear skies.
I, the copyright holder of this work, hereby publish it under the following licenses:
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
This licensing tag was added to this file as part of the GFDL licensing update.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
{{Information |Description=Dichroic Lampwork beads. Main bead 10mm. On January 27th, 2006, I, pschemp created this picture by putting a few of my dichroic beads on my HP scanner and scanning them at 1200 dpi. The process took apporximatley 2 minutes an