Mantelli Fossa MF.1
| MF-1 | |
|---|---|
| Role | Primary glider |
| National origin | Italy |
| Manufacturer | Ennio Fossa |
| Designer | Adriano Mantelli |
| First flight | 14 August 1934 |
| Number built | 1 |
The Mantelli-Fossa MF-1 was a single-seat primary glider built in Italy in 1934. Only one was constructed.
Design and development[edit]
The Mantelli-Fossa MF-1 was designed by Adriano Mantelli, an experienced aircraft modeller. To fund its construction, Mantelli, his cousin Dino Sirocchi and some other aircraft modellers founded a company named SDAM after their senior partners' initials. The MF-1 was built by Ennio Fossa in his family workshop. It was a high-wing monoplane, its wing supported centrally on a fuselage pedestal and braced on each side with a faired V strut from beyond mid-span to the lower fuselage. It was mounted without dihedral and was rectangular in plan apart from cropped aileron tips.[1]
The fuselage, rectangular in cross-section though with a rounded decking, was entirely fabric-covered. There was an open cockpit immediately ahead of the pedestal. Aft of the wing the fuselage tapered to the tail, where a triangular tailplane with rectangular elevators was placed on top of it. The fin was small and triangular and carried a straight-edged balanced rudder which extended down to the keel, operating in an elevator cut-out. The MF-1 landed on a conventional wooden skid fitted with rubber shock absorbers, assisted by a very small tail skid.[1]
Mantelli flew the MF-1 for the first time on 14 August 1934. Later that year he competed in it at Cantù in the Littoriali Contests.[1]
Specifications[edit]
Data from Pedrielli (2011) p.193[1]
General characteristics
- Capacity: One
- Length: 5.70 m (18 ft 8 in)
- Wingspan: 11 m (36 ft 1 in)
- Wing area: 16.50 m2 (177.6 sq ft)
- Aspect ratio: 7.3
- Empty weight: 95 kg (209 lb)
- Gross weight: 170 kg (375 lb)
Performance
- Maximum glide ratio: estimated 16:1
- Wing loading: 10.30 kg/m2 (2.11 lb/sq ft)
