Pinch (plasma physics)
A pinch is the compression of an electrically conducting filament by magnetic forces. The conductor is usually a plasma, but could also be a solid or liquid metal. Pinches were the first device used by mankind for controlled nuclear fusion.
- 1 Types
- 2 Common behavior
- 3 Applications and devices
- 4 History
- 5 Equilibrium analysis
- 6 Formal treatment
- 7 References in culture
- 8 See also
- 9 References
- 10 External links
Pinches exist in laboratories and in nature. Pinches differ in their geometry and operating forces. These include:
- Uncontrolled: any time an electric current moves in large amounts (e.g. lightning, arcs, sparks, discharges) a magnetic force can pull together plasma. This can be insufficient for fusion.
- Sheet pinch: an astrophysical effect, this arises from vast sheets of charge particles.
- Z-pinch: the current runs down the axis (or walls) of the cylinder while the magnetic field is azimuthal
- Theta pinch: the magnetic field runs down the axis of the cylinder, while the electric field is in the azimuthal direction (also called a thetatron)
- Screw pinch: a combination of a Z pinch and theta pinch  (also called a stabilized Z-pinch, or θ-z pinch)
- Reversed field pinch: This is an attempt to do a Z-pinch inside an endless loop. The plasma has an internal magnetic field. As you move out from the center of this ring, the magnetic field reverses direction. Also called a toroidal pinch.
- Inverse pinch: An early fusion concept, this device consisted of a rod surrounded by plasma. Current traveled through the plasma and returned along the center rod. This geometry was slightly different than a z-pinch in that the conductor was in the center, not the sides.
- Cylindrical pinch
- Orthogonal pinch effect
- Ware pinch: an pinch that happens inside Tokamaks. This is when particles inside the Banana orbit condense together.
- MAGLIF. This is a combination of a Z-pinch and a laser beam to stop loss of material at the end. 
Pinches may become unstable. They radiate energy as light across the whole electromagnetic spectrum including radio waves, x-rays, gamma rays, synchrotron radiation, and visible light. They also produce neutrons, as a product of fusion.
Applications and devices
Pinches are used to generate X-rays and the intense magnetic fields generated are used in electromagnetic forming of metals. They also have applications in particle beams including particle beam weapons, astrophysics studies and it has been proposed to use them in in space propulsion. A number of large pinch machines have been built to study fusion power; here are several:
- MAGPIE A Z-pinch at Imperial college. This dumps a massive amount of current across a wire. Under these conditions the wire becomes plasma and compresses to produce fusion.
- Z Pulsed Power Facility at Sandia National Laboratories.
- ZETA device in Culham England
- Madison Symmetric Torus at the University of Wisconsin Madison
- Reversed-Field eXperiment in Italy.
- dense plasma focus in New Jersey
- University of Nevada, Reno (USA)
- Cornell University (USA)
- University of Michigan (USA)
- University of California, San Diego (USA)
- University of Washington (USA)
- Ruhr University (Germany)
- École Polytechnique (France)
- Weizmann Institute of Science (Israel)
- Universidad Autónoma Metropolitana (Mexico).
Crushing cans with the pinch effect
Many high-voltage electronics enthusiasts make their own crude electromagnetic forming devices. They use pulsed power techniques to produce a theta pinch capable of crushing an aluminium soft drink can using the Lorentz forces created when large currents are induced in the can by the strong magnetic field of the primary coil.
An electromagnetic aluminium can crusher consists of four main components: a high voltage DC power supply which provides a source of electrical energy, a large energy discharge capacitor to accumulate the electrical energy, a high voltage switch or spark gap, and a robust coil (capable of surviving high magnetic pressure) through which the stored electrical energy can be quickly discharged in order to generate a correspondingly strong pinching magnetic field (see diagram below).
In practice, such a device is somewhat more sophisticated than the schematic diagram suggests, including electrical components that control the current in order to maximize the resulting pinch, and to ensure that the device works safely. For more details, see the notes.
The first creation of a Z-pinch in the laboratory may have occurred in 1790 in Holland when Martinus van Marum created an explosion by discharging 100 Leyden jars into a wire. The phenomenon was not understood until 1905, when Pollock and Barraclough investigated a compressed and distorted length of copper tube from a lightning rod after it had been struck by lightning. Their analysis showed that the forces due to the interaction of the large current flow with its own magnetic field could have caused the compression and distortion. A similar, and apparently independent, theoretical analysis of the pinch effect in liquid metals was published by Northrupp in 1907. The next major development was the publication in 1934 of an analysis of the radial pressure balance in a static Z-pinch by Bennett (see the following section for details).
Thereafter, the experimental and theoretical progress on pinches was driven by fusion power research. In their article on the "Wire-array Z-pinch: a powerful x-ray source for ICF", M G Haines et al., wrote on the "Early history of Z-pinches".
- In 1946 Thompson and Blackman submitted a patent for a fusion reactor based on a toroidal Z-pinch with an additional vertical magnetic field. But in 1954 Kruskal and Schwarzschild published their theory of MHD instabilities in a Z-pinch. In 1956 Kurchatov gave his famous Harwell lecture showing nonthermal neutrons and the presence of m = 0 and m = 1 instabilities in a deuterium pinch. In 1957 Pease and Braginskii independently predicted radiative collapse in a Z-pinch under pressure balance when in hydrogen the current exceeds 1.4 MA. (The viscous rather than resistive dissipation of magnetic energy discussed above and in would however prevent radiative collapse). In 1958, the world's first controlled fusion experiment was accomplished using a Z-pinch machine named Scylla I at the Los Alamos National Laboratory. A cylinder full of deuterium was converted into a plasma and compressed to 15 million degrees Celsius under a Z-pinch effect. Lastly, at Imperial College in 1960, led by R Latham, the Plateau-Rayleigh instability was shown, and its growth rate measured in a dynamic Z-pinch.
In plasma physics three pinch geometries are commonly studied: the θ-pinch, the Z-pinch, and the Screw Pinch. These are cylindrically shaped. The cylinder is symmetric in the axial (z) direction and the azimuthal (θ) directions. The one-dimensional pinches are named for the direction the current travels.
The θ-pinch has a magnetic field traveling in the z direction. Using Ampère's law (discarding the displacement term)
Since B is only a function of r we can simplify this to
So J points in the θ direction.
Thus, the equilibrium condition ( ∇p = j × Β) for the θ-pinch reads:
θ-pinches tend to be resistant to plasma instabilities; This is due in part to the frozen in flux theorem, which is beyond the scope of this article.
The Z-Pinch has a magnetic field in the θ direction. Again, by electrostatic Ampere's Law
So J points in the z direction.
Thus, the equilibrium condition ( ∇p = j × Β) for the Z-pinch reads:
Since particles in a plasma basically follow magnetic field lines, Z-pinches lead them around in circles. Therefore, they tend to have excellent confinement properties.
The screw pinch
The screw pinch is an effort to combine the stability aspects of the θ-pinch and the confinement aspects of the Z-pinch. Referring once again to Ampere's Law
But this time, the B field has a θ component and a z component
So this time J has a component in the z direction and a component in the θ direction.
Finally, the equilibrium condition ( ∇p = j × Β) for the screw pinch reads:
A common problem with one-dimensional pinches is the end losses. Most of the motion of particles is along the magnetic field. With the θ-pinch and the screw-pinch, this leads particles out of the end of the machine very quickly, leading to a loss of mass and energy. On top of this problem, the Z-pinch has major stability problems. Though particles can be reflected to some extent with magnetic mirrors, even these allow many particles to pass. A common method of beating these end losses, is to bend the cylinder around into a torus. Unfortunately this breaks θ symmetry, as paths on the inner portion (inboard side) of the torus are shorter than similar paths on the outer portion (outboard side). Thus, a new theory is needed. This gives rise to the famous Grad–Shafranov equation. Numerical solutions to the Grad–Shafranov equation have also yielded some equilibria, most notably that of the reversed field pinch.
As of 2015, there is not a coherent analytical theory for three-dimensional equilibria. The general approach to finding three-dimensional equilibria is to solve the vacuum ideal MHD equations. Numerical solutions have yielded designs for stellarators. Some machines take advantage of simplification techniques such as helical symmetry (for example University of Wisconsin's Helically Symmetric eXperiment). However, for an arbitrary three-dimensional configuration an equilibrium relation, similar to that of the 1-D configurations exists:
Where κ is the curvature vector defined as:
with b the unit vector tangent to B.
The Bennett relation
Consider a cylindrical column of fully ionized quasineutral plasma, with an axial electric field, producing an axial current density, j, and associated azimuthal magnetic field, B. As the current flows through its own magnetic field, a pinch is generated with an inward radial force density of j x B. In a steady state with forces balancing:
- ∇p = ∇(pe + pi) = j × Β
- (the Bennett relation)
where N is the number of electrons per unit length along the axis, Te and Ti are the electron and ion temperatures, I is the total beam current, and k is the Boltzmann constant.
The generalized Bennett relation
The Generalized Bennett Relation considers a current-carrying magnetic-field-aligned cylindrical plasma pinch undergoing rotation at angular frequency ω. Along the axis of the plasma cylinder flows a current density jz, resulting in an azimuthal magnetίc field Βφ. Originally derived by Witalis, the Generalized Bennett Relation results in:
- where a current-carrying, magnetic-field-aligned cylindrical plasma has a radius a,
- J0 is the total moment of inertia with respect to the z axis,
- W⊥kin is the kinetic energy per unit length due to beam motion transverse to the beam axis
- WBz is the self-consistent Bz energy per unit length
- WEz is the self-consistent Ez energy per unit length
- Wk is thermokinetic energy per unit length
- I(a) is the axial current inside the radius a (r in diagram)
- N(a) is the total number of particles per unit length
- Er is the radial electric field
- Eφ is the rotational electric field
The positive terms in the equation are expansional forces while the negative terms represent beam compressional forces.
The Carlqvist relation
The Carlqvist Relation, published by Per Carlqvist in 1988, is a specialization of the Generalized Bennett Relation (above), for the case that the kinetic pressure is much smaller at the border of the pinch than in the inner parts. It takes the form
and is applicable to many space plasmas.
The Carlqvist Relation can be illustrated (see right), showing the total current (I) versus the number of particles per unit length (N) in a Bennett pinch. The chart illustrates four physically distinct regions. The plasma temperature is quite cold (Ti = Te = Tn = 20 K), containing mainly hydrogen with a mean particle mass 3×10−27 kg. The thermokinetic energy Wk >> πa2 pk(a). The curves, ΔWBz show different amounts of excess magnetic energy per unit length due to the axial magnetic field Bz. The plasma is assumed to be non-rotational, and the kinetic pressure at the edges is much smaller than inside.
Chart regions: (a) In the top-left region, the pinching force dominates. (b) Towards the bottom, outward kinetic pressures balance inwards magnetic pressure, and the total pressure is constant. (c) To the right of the vertical line ΔWBz = 0, the magnetic pressures balances the gravitational pressure, and the pinching force is negligible. (d) To the left of the sloping curve ΔWBz = 0, the gravitational force is negligible. Note that the chart shows a special case of the Carlqvist relation, and if it is replaced by the more general Bennett relation, then the designated regions of the chart are not valid.
Carlqvist further notes that by using the relations above, and a derivative, it is possible to describe the Bennett pinch, the Jeans criterion (for gravitational instability, in one and two dimensions), force-free magnetic fields, gravitationally balanced magnetic pressures, and continuous transitions between these states.
References in culture
- fusion power
- Madison Symmetric Torus (Reversed field pinch, How to make a toroidal pinch)
- Explosively pumped flux compression generator
- List of plasma (physics) articles
- Pollock J A and Barraclough S, 1905 Proc. R. Soc. New South Wales 39 131
- Phillips, James. "Magnetic Fusion." Los Alamos Science Winter 1983: 64-67. Web. 4 Apr. 2013.
- See for example, Buneman, O., "The Bennett Pinch" (1961) Plasma Physics, Edited by James E. Drummond. LOC 60-12766. Publ. McGraw-Hill, Inc., New York, 1961, p.202
- Lee, S., "Energy balance and the radius of electromagnetically pinched plasma columns" (1983) Plasma Physics, Volume 25, Issue 5, pp. 571–576 (1983).
- Schmidt, Helmut, "Formation of a Magnetic Pinch in InSb and the Possibility of Population Inversion in the Pinch" (1966) Physical Review, vol. 149, Issue 2, pp. 564–573
- Severnyi, A. B., "On the Appearance of Cosmics Rays in the Pinch Effect in Solar Flares" (1959) Soviet Astronomy, Vol. 3, p.887
- Zueva, N. M.; Solov'ev, L. S.; Morozov, A. I. "Nonlinear instability of plasma pinches" (1976) Journal of Experimental and Theoretical Physics Letters, Vol. 23, p.256
- Rai, J.; Singh, A. K.; Saha, S. K, "Magnetic field within the return stroke channel of lightning" (1973) Indian Journal of Radio and Space Physics, vol. 2, Dec. 1973, p. 240-242.
- Galperin, Iu. I.; Zelenyi, L. M.; Kuznetsova, M. M. "Pinching of field-aligned currents as a possible mechanism for the formation of raylike auroral forms" (1986) Kosmicheskie Issledovaniia (ISSN 0023-4206), vol. 24, Nov.-Dec. 1986, p. 865-874. In Russian.
- Syrovatskii, S. I. "Pinch sheets and reconnection in astrophysics" (1981) In Annual review of astronomy and astrophysics. Volume 19. (A82-11551 02-90) Palo Alto, CA, Annual Reviews, Inc., 1981, p. 163-229
- Airapetyan, V. S.; Vikhrev, V. V.; Ivanov, V. V.; Rozanova, G. A. "Pinch Mechanism of Energy Release of Stellar Flares" (1990) Astrophsyics (Tr. Astrofizika) v.32 No.3 Nov. p.230 1990
- Carlqvist, Per, "Cosmic electric currents and the generalized Bennett relation" (1988) Astrophysics and Space Science (ISSN 0004-640X), vol. 144, no. 1-2, May 1988, p. 73-84
- Biskamp, Dieter (1997) Nonlinear Magnetohydrodynamics Cambridge University Press, Cambridge, England, page 130, ISBN 0-521-59918-0
- See Dictionary of Material Science and High Energy Physics p.315 ISBN 0-8493-2889-6
- Srivastava, K. M.; Vyas, D. N., "Non-linear analysis of the stability of the screw pinch", (1982) Astrophysics and Space Science, vol. 86, no. 1, Aug. 1982, p. 71-89
- See "MHD Equilibria" in Introduction to Plasma Physics by I.H.Hutchinson (2001)
- "Inverse Pinch Effect" Anderson, Et al. Physics of Fluids, Volume 1, Issue 6, p.489-494
- Helander, P. et al. "The effect of non-inductive current drive on tokamak transport" (2005) Plasma Physics and Controlled Fusion, Volume 47, Issue 12B, pp. B151-B163
- "Plasma Physics: Third Edition" Page 266 https://books.google.co.uk/books?id=4cHkd77TSHcC&pg=PA266&dq=Ware+pinch&hl=en&sa=X&ei=aZsVVdvZF5L8gwSO_oDoDw&ved=0CCYQ6AEwAQ#v=onepage&q=Ware%20pinch&f=false
- Slutz, Stephen; Roger A. Vesey (12 January 2012). "High-Gain Magnetized Inertial Fusion". Physical Review Letters 108 (2). Bibcode:2012PhRvL.108b5003S. doi:10.1103/PhysRevLett.108.025003. Retrieved 11 April 2012.
- Hardee, P. E., "Helical and pinching instability of supersonic expanding jets in extragalactic radio sources" (1982) Astrophysical Journal, Part 1, vol. 257, June 15, 1982, p. 509-526
- Pereira, N. R., et al., "[X rays from Z-pinches on relativistic electron-beam generators]" (1988) Journal of Applied Physics (ISSN 0021-8979), vol. 64, Aug. 1, 1988, p. R1-R27
- Wu, Mei; Chen, Li; Li, Ti-Pei, "Polarization in Gamma-Ray Bursts Produced by Pinch Discharge" (2005) Chinese Journal of Astronomy & Astrophysics, Vol. 5, p. 57-64
- Peratt, A.L., "Synchrotron radiation from pinched particle beams", (1998) Plasma Physics: VII Lawpp 97: Proceedings of the 1997 Latin American Workshop on Plasma Physics, Edited by Pablo Martin, Julio Puerta, Pablo Martmn, with reference to Meierovich, B. E., "Electromagnetic collapse. Problems of stability, emission of radiation and evolution of a dense pinch" (1984) Physics Reports, Volume 104, Issue 5, p. 259-346.
- Anderson, Oscar A., et al., "Neutron Production in Linear Deuterium Pinches" (1958) Physical Review, vol. 110, Issue 6, pp. 1375–1387
- Ryutov, D. D.; Derzon, M. S.; Matzen, M. K, "The physics of fast Z pinches" (2000) Reviews of Modern Physics, vol. 72, Issue 1, pp. 167–223
- Andre Gsponer, "Physics of high-intensity high-energy particle beam propagation in open air and outer-space plasmas" (2004) http://arxiv.org/abs/physics/0409157
- Peratt, Anthony L., "The role of particle beams and electrical currents in the plasma universe" (1988) Laser and Particle Beams (ISSN 0263-0346), vol. 6, Aug. 1988, p. 471-491.
- "Z-Pinch Pulsed Plasma Propulsion Technology Development"Final Report Advanced Concepts Office (ED04) Marshall Space Flight Center October 8, 2010, Tara Polsgrove, Et Al.
- http://dorland.pp.ph.ic.ac.uk/magpie/?page_id=239 "Wire Arrays Z-Pinch" accessed: 3-27-2015
- LaPointe, Robert. "High Voltage Devices and Experiments". Retrieved February 21, 2013.
- Tristan. "Electromagnetic Can Crusher". Retrieved February 21, 2013.
- Borros, Sam. "Solid State Can Crusher". Retrieved February 21, 2013.
- "MagnetoPulS". web site. MAGNET-PHYSIK Dr. Steingroever GmbH. 2002. Archived from the original on 2003-05-22. Retrieved February 21, 2013.
- "Industrial Application of the Electromagnetic Pulse Technology". white paper. PSTproducts GmbH. June 2009. Retrieved February 21, 2013.
- Examples of electromagnetic pinch can crushers can be found at (a) Bob LaPointe's site on High Voltage Devices and Experiments (b) Tristran's Electromagnetic Can Crusher (including schematic) (c) Sam Borros's Solid State Can Crusher
- See also the IEEE History Center, "Evolution of the IEEE Logo" March 1963; see also the comments in "Laboratory Astrophysics"
- van Marum M 1790 Proc. 4th Int. Conf. on Dense Z-Pinches (Vancouver 1997) (Am. Inst. Phys. Woodbury, New York, 1997) Frontispiece and p ii
- R. S. Pease, "The Electromagnetic Pinch: From Pollock to the Joint European Torus", "Pollock Memorial Lecture for 1984 delivered at the University of Sydney, 28 November, 1984": This review of the electromagnetic pinch starts with an exhibit taken from Pollock's work, carefully preserved and drawn to attention of modern research by Professor C. Watson-Munro. It is a compressed and distorted length of copper tube originally part of the lightning conductor on the Hartley Vale kerosene refinery in New South Wales. It was known to have been struck by lightning. Pollock and Barraclough (1905) from the Department of Mechanical Engineering at Sydney University carried out an analysis to see whether or not the compression could have arisen from the flow of electric current. They concluded that the compressive forces, due to the interaction of the large current flow with its own magnetic field could have been responsible for the compression and distortion. As far as I know, this is the first identified piece of observational data on the electromagnetic pinch; and the first theoretical discussion of the effect.
- Northrupp E F 1907 "Some Newly Observed Manifestations of Forces in the Interior of an Electric Conductor" (1907) Phys. Rev. 24 474. He wrote: "Some months ago, my friend, Carl Hering, described to me a surprising and apparently new phenomenon which he had observed. He found, in passing a relatively large alternating current through a non-electrolytic, liquid conductor contained in a trough, that the liquid contracted in cross-section and flowed up hill lengthwise of the trough... Mr. Hering suggested the idea that this contraction was probably due to the elastic action of the lines of magnetic force which encircle the conductor... As the action of the forces on the conductor is to squeeze or pinch it, he jocosely called it the 'pinch phenomenon'.
- W.H.Bennett, "Magnetically Self-Focussing Streams", Phys. Rev. 45 890 (1934)
- M G Haines, T W L Sanford and V P Smirnov, "Wire-array Z-pinch: a powerful x-ray source for ICF" (2005) Plasma Phys. Control. Fusion 47 B1-B11 (online in full, click PDF).
- Thompson G P and Blackman M 1946 British Patent 817681. Haines M G 1996 "Historical Perspective: Fifty years of controlled fusion research" Plasma Phys. Control. Fusion 38 643
- Kruskal M D and Schwarzschild "Some Instabilities of a Completely Ionized Plasma" 1954 Proc. R. Soc. Lond. A 223 348
- Kurchatov I V 1957 J. Nucl. Energy 4 193
- Pease R S "Equilibrium Characteristics of a Pinched Gas Discharge Cooled by Bremsstrahlung Radiation" 1957 Proc. Phys. Soc. Lond. 70 11
- Braginskii S I 1957 Zh. Eksp. Teor. Fiz 33 645; Braginskii S I 1958 Sov. Phys.—JETP 6 494
- Haines M G et al. 2005 Phys. Rev. Lett. submitted; see also EPS Conf. on Plasma Physics 2004 (London, UK) paper 73
- Curzon F L et al. "Experiments on the Growth Rate of Surface Instabilities in a Linear Pinched Discharge" 1960 Proc. R. Soc. Lond. A 257 386
- Ideal Magnetohydrodynamics: Modern perspectives in energy. Jeffrey P. Freidberg. Massachusetts Institute of Technology. Cambridge, Massachusetts. Plenum Press - New York and London - 1987. (Pg.86 & 95)
- Trubnikov, Boris A., "A new hypothesis of cosmic ray generation in plasma pinches" (1992) IEEE Transactions on Plasma Science (ISSN 0093-3813), vol. 20, no. 6, p. 898-904.
- "The PLASMAK Configuration and Ball Lightning" (PDF) presented at the International Symposium on Ball Lightning; July 1988
- Witalis, E. A. "Plasma-physical aspects of charged-particle beams" (1981) Physical Review A - General Physics, 3rd Series, vol. 24, Nov. 1981, p. 2758–2764
- Anthony L . Peratt, "Physics of the Plasma Universe", 1992 Springer-Verlag, ISBN 0-387-97575-6
- J. H. Jeans, "The stability of a spherical nebula" Phil. Trans. R. Soc. Lond. A 199 (1902)
- "The Con-Artist Physics of 'Ocean's Eleven'". American Physical Society. March 2002.
- Examples of electromagnetically shrunken coins and crushed cans.
- Theory of electromagnetic coin shrinking
- The Known History of "Quarter Shrinking"
- Can crushing info using electromagnetism among other things.
- The MAGPIE project at Imperial College London is used to study wire array Z-pinch implosions.