Jump to content

Schlenk-frit

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Herravondure (talk | contribs) at 15:02, 11 May 2022 (Successfully de-orphaned! Wikiproject Orphanage: You can help!). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
A schlenk-frit.
A schlenk-frit.

A Schlenk-frit is a laboratory filtration device operating under inert gas conditions (schlenk conditions). It separates air- and water-sensitive suspensions into liquid and solid parts. A Schlenk-frit is made of a glass tube with a ground glass joint at both ends, a fused filter (a porous glass disk) and valves at both sides.[1]

Use

[edit]

Before usage, the Schlenk-frit has to be heated, to remove water traces. The Schlenk-frit is put onto the product flask using an inert gas counterflow and closed at the top end with a second flask. The whole is turned 180° to start filtration. The liquid parts of the reaction mix go through the filter while the solid parts remain.

To speed up the filtration pressure can be lowered at the bottom part of the filter. Care has to be taken that the solvent does not evaporate.

References

[edit]
  1. ^ Ackermann, Jürgen; Reinhold Tacke1, Ulrich Wannagat, Ulrich Koke, Friedrich Meyer (1979). "Derivate des 1-(4-Chlorphenyl)silacyclohexans mit 3-(Diethylamino)propyl- und 2-(Diethylamino)ethyl-Gruppierungen". Liebigs Annalen der Chemie. 1979 (11): 1915–1924. doi:10.1002/jlac.197919791128.{{cite journal}}: CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)
    Zhang, Jie; Alan M. Bond, Douglas R. MacFarlane, Stewart A. Forsyth, and Jennifer M. Pringle (2005). "Voltammetric Studies on the Reduction of Polyoxometalate Anions in Ionic Liquids". Inorganic Chemistry. 44 (14): 5123–5132. doi:10.1021/ic050032t. hdl:10536/DRO/DU:30063348. PMID 15998041.{{cite journal}}: CS1 maint: multiple names: authors list (link)