Jump to content

Search coil magnetometer

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Constant314 (talk | contribs) at 22:13, 21 October 2022 (Applications: Remove unsourced and unnecessary elaboration.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The search coil magnetometer or induction magnetometer, based on an inductive sensor (also known as inductive loop and inductive coil), is a magnetometer which measures the varying magnetic flux. An inductive sensor connected to a conditioning electronic circuit constitutes a search coil magnetometer. It is a vector magnetometer which can measure one or more components of the magnetic field. A classical configuration uses three orthogonal inductive sensors. The search-coil magnetometer can measure magnetic field from mHz up to hundreds of MHz.

Principle

The inductive sensor is based on Faraday's law of induction. The temporal variation of the Magnetic Flux through a N turns circuit will induce a voltage which follows

which can be expressed in a simpler way

by assuming that the induced magnetic field B is homogeneous over a section S (the Magnetic flux will be expressed ).

Figure 1: Induction sensor made up of a winding (orange) surrounding a ferromagnetic core (grey)

The induced voltage () may be increased several ways:

  • increase the surface (S),
  • increase the turn number (N),
  • use a ferromagnetic core.

Search coil using a ferromagnetic core

When a coil is wound around a ferromagnetic core, that increases the sensitivity of the sensor thanks to the apparent permeability of the ferromagnetic core.

Apparent permeability

The magnetic amplification, known as apparent permeability , is the result of the magnetization of the ferromagnetic core response to an external magnetic field. The magnetization is reduced by the demagnetizing field.

where is the relative permeability, is the demagnetizing coefficient in the z direction.

The induced voltage will be written


The demagnetizing coefficient can easily be computed in the case of simple shapes (spheres and ellipsoids).

Applications

References

See also