Thompson-Voight dragster

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DannyS712 bot (talk | contribs) at 05:15, 28 April 2019 (→‎Sources: Task 12: Fix WP:WCW error 17 - category duplication). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Thompson-Voight dragster
Overview
DesignerMickey Thompson and Fritz Voight
Body and chassis
ClassTop Fuel
Body styleStreamliner dragster
Powertrain
EngineTwin 392 cu in (6,420 cc) Chrysler hemis
Chronology
PredecessorNone
SuccessorNone

The Thompson-Voight dragster is a twin-engined streamliner dragster.[1]

Mickey Thompson collaborated with Fritz Voight in building the dragster, which had a fully enclosed body (except the steel front wheels), including a closed canopy.[1] It was powered by a pair of 392 cu in (6,420 cc) Chrysler hemis, one facing forward to drive the rear wheels, the other facing backward to drive the front ones.[1]

Wearing number 555, the car debuted in 1958 at Bonneville, after "an impromptu stop", where it achieved 242 mph (389 km/h) on its very first run.[1]

The next week, the car turned in a best speed of 294.117 mph (473.335 km/h), but broke a connecting rod, leaving Thompson unable to back up his speed to make it official.[1]

While a reasonable success in land speed racing, the car proved too slow for drag racing, never able to top high-9 second passes or 149.50 mph (240.60 km/h) (even with its body removed), when contemporary slingshot fuellers were routinely hitting mid-9s.[1]

Notes

  1. ^ a b c d e f Taylor, Thom. "Mickey Thompson, Fritz Voight dragster", in "Beauty Beyond the Twilight Zone", p. 31.

Sources

  • Taylor, Thom. "Beauty Beyond the Twilight Zone" in Hot Rod, April 2017, pp. 30–43.