Continuous Liquid Interface Production: Difference between revisions
Content deleted Content added
created stub about additive manufacturing technique |
merging from https://en.wikipedia.org/w/index.php?title=Continuous_liquid_interface_production&oldid=652185668 |
||
| Line 1: | Line 1: | ||
'''Continuous Liquid Interface Production''' ( |
'''Continuous Liquid Interface Production''' ('''CLIP''') is a form of additive manufacturing or [[3D printing]] that uses [[photo polymerization]]. CLIP is achieved with an [[oxygen]]-[[Semipermeable membrane|permeable window]] below the [[ultraviolet]] image projection plane, which creates a “dead zone” (persistent liquid interface) where photopolymerization is inhibited between the window and the polymerizing part. Unlike [[stereolithography]], the printing process is continuous and can be used to create 3D objects faster than pre-existing [[polymer]] based printing methods.<ref>{{cite news|last1=Castelvecchi|first1=Davide|title=Chemical trick speeds up 3D printing|url=http://www.nature.com/news/chemical-trick-speeds-up-3d-printing-1.17122?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Science360NewsServiceComplete+%28Science360+News+Service%3A+Complete%29|publisher=[[Nature (journal)|Nature]]|date=17 March 2015|accessdate=19 March 2015}}</ref><ref>{{cite news|last1=Saxena|first1=Shalini|title=New nonstop 3D printing process takes only minutes instead of hours|url=http://arstechnica.com/science/2015/03/new-nonstop-3d-printing-process-takes-only-minutes-instead-of-hours/|accessdate=19 March 2015|publisher=[[Ars Technica]]|date=19 March 2015}}</ref> |
||
== |
==References== |
||
{{reflist}} |
|||
* [http://www.sciencemag.org/content/347/6228/1349 Continuous liquid interface production of 3D objects Science 20 March 2015: Vol. 347 no. 6228 pp. 1349-1352 DOI: 10.1126/science.aaa2397] |
|||
* [http://www.ted.com/talks/joe_desimone_what_if_3d_printing_was_25x_faster# Joseph DeSimone: What if 3D printing was 100x faster?] - video at [[TED (conference)|TED]] |
|||
==Further reading== |
|||
*{{cite journal|last1=Tumbleston|first1=J. R.|last2=Shirvanyants|first2=D.|last3=Ermoshkin|first3=N.|last4=Janusziewicz|first4=R.|last5=Johnson|first5=A. R.|last6=Kelly|first6=D.|last7=Chen|first7=K.|last8=Pinschmidt|first8=R.|last9=Rolland|first9=J. P.|last10=Ermoshkin|first10=A.|last11=Samulski|first11=E. T.|last12=DeSimone|first12=J. M.|title=Continuous liquid interface production of 3D objects|journal=[[Science (journal)|Science]]|date=16 March 2015|volume=347|issue=6228|pages=1349–1352|doi=10.1126/science.aaa2397}} |
|||
{{Tech-stub}} |
|||
[[Category:2015 introductions]] |
|||
[[Category:3D printing]] |
|||
Revision as of 22:32, 19 March 2015
Continuous Liquid Interface Production (CLIP) is a form of additive manufacturing or 3D printing that uses photo polymerization. CLIP is achieved with an oxygen-permeable window below the ultraviolet image projection plane, which creates a “dead zone” (persistent liquid interface) where photopolymerization is inhibited between the window and the polymerizing part. Unlike stereolithography, the printing process is continuous and can be used to create 3D objects faster than pre-existing polymer based printing methods.[1][2]
References
- ^ Castelvecchi, Davide (17 March 2015). "Chemical trick speeds up 3D printing". Nature. Retrieved 19 March 2015.
- ^ Saxena, Shalini (19 March 2015). "New nonstop 3D printing process takes only minutes instead of hours". Ars Technica. Retrieved 19 March 2015.
Further reading
- Tumbleston, J. R.; Shirvanyants, D.; Ermoshkin, N.; Janusziewicz, R.; Johnson, A. R.; Kelly, D.; Chen, K.; Pinschmidt, R.; Rolland, J. P.; Ermoshkin, A.; Samulski, E. T.; DeSimone, J. M. (16 March 2015). "Continuous liquid interface production of 3D objects". Science. 347 (6228): 1349–1352. doi:10.1126/science.aaa2397.
 | This technology-related article is a stub. You can help Wikipedia by expanding it. |