ASTM F568M
ASTM F568M is an ASTM International standard for metric bolts, screws and studs that are used in general engineering applications. It is titled: Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. It defines mechanical properties for fasteners that range from M1.6 to 100 in diameter. The standard was withdrawn in 2012.[1] and has been replaced by ISO 898-1[2]
This standard defines property classes, the metric equivalent of a screw grade, that are almost identical to those defined by ISO 898-1,[2] except for the addition of the 8.8.3 and 10.9.3 standards. These two additional standards are fasteners that have the same mechanical properties as their base property class (i.e. 8.8 and 10.9), but are made from weathering steel.[1][3]
This is a standard set by the standards organization ASTM International, a voluntary standards development organization that sets technical standards for materials, products, systems, and services.
Mechanical properties
| Head marking | Grade, material & condition | Nominal thread diameter size range [mm] | Proof strength [MPa] | Yield strength (min) [MPa] | Tensile strength (min) [MPa] | Core hardness [Rockwell] |
|---|---|---|---|---|---|---|
 |
Class 4.6 Low or medium carbon steel |
5–100 | 225 | 240 | 400 | B67–95 |
 |
Class 4.8 Low or medium carbon steel; fully or partially annealed |
1.6–16 | 310 | 340 | 420 | B71–95 |
 |
Class 5.8 Low or medium carbon steel; cold worked |
5–24 | 380 | 420 | 520 | B82–95 |
 |
Class 8.8[5] Medium carbon steel; quench and tempered |
Under 16 (inc.) | 580 | 640 | 800 | |
| 17–72 | 600 | 660 | 830 | C23–34 | ||
 |
Class 8.8 low carbon Low carbon boron steel; quench and tempered | |||||
 |
Class 8.8.3[1] Atmospheric corrosion resistant steel; quench and tempered | |||||
 |
Class 9.8 Medium carbon steel; quench and tempered |
1.6–16 | 650 | 720 | 900 | C28–37 |
 |
Class 9.8 low carbon Low carbon boron steel; quench and tempered | |||||
 |
Class 10.9 Alloy steel; quench and tempered |
5–100 | 830 | 940 | 1040 | C32–39 |
 |
Class 10.9 low carbon Low carbon boron steel; quench and tempered | |||||
 |
Class 10.9.3[1] Atmospheric corrosion resistant steel; quench and tempered | |||||
 |
Class 12.9 Alloy steel; quench and tempered |
1.6–100 | 970 | 1100 | 1220 | C39–44 |
See also
References
- ^ a b c d ASTM F568M - 07, retrieved 2009-06-10.
- ^ a b ISO 898-1:2009, 2009-04-01, retrieved 2016-04-13.
- ^ Bickford & Nassar 1998, p. 154.
- ^ Metric Handbook, archived from the original on October 31, 2007, retrieved 2009-06-06
{{citation}}: Unknown parameter|deadurl=ignored (|url-status=suggested) (help). - ^ Bolt grade markings and strength chart, retrieved 2009-05-29.
Bibliography
- Bickford, John H.; Nassar, Sayed (1998), Handbook of bolts and bolted joints, CRC Press, ISBN 978-0-8247-9977-9.